TOA C-CC714 NT - Manuals

TOA C-CC714 NT – Manual in PDF format online.

Manuals:

Manual

Manual TOA C-CC714 NT

Summary

Page 2 - TABLE OF CONTENTS; SAFETY PRECAUTIONS

2 TABLE OF CONTENTS 1. SAFETY PRECAUTIONS ............................................................................... 3 2. GENERAL DESCRIPTION ............................................................................. 5 3. FEATURES ................................................................

Page 3 - Safety Symbol and Message Conventions; When Installing the Unit; WARNING

3 1. SAFETY PRECAUTIONS • Be sure to read the instructions in this section carefully before use.• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction ...

Page 4 - this may result in fire or electric shock.; CAUTION; may result in electrical shock.; When the Unit is in Use; cleaning or leaving the unit unused for 10 days or more.

4 When Installing the Unit • Avoid installing the unit in locations exposed to sea breeze or corrosive gas. Mounts may become corroded, eventually causing the unit to fall off, which could result in personal injury. • Do not mount the unit in locations exposed to constant vibration. The mounting scr...

Page 5 - GENERAL DESCRIPTION; • Up to 255 camera positions can be preset.

5 2. GENERAL DESCRIPTION TOA’s dome-type color cameras combine with a high-speed camera drive that permits one 360-degreehorizontal rotation per second and a 22 times (C-CC714) or a 23 times (C-CC764) optical zoom lens. Up to255 arbitrary positions can be preset and such preset positions can be inst...

Page 6 - HANDLING PRECAUTIONS; Do not install the unit in a vehicle nor ship.

6 4. HANDLING PRECAUTIONS • Noise may appear on the monitor or preset camera positions may deviate with prolonged camera use. In such cases, use the camera’s refresh function to automatically refresh settings and reestablish the homeposition once a day or week, thus allowing any position deviation t...

Page 7 - becomes smudged and dirty.; Note; NTSC version complies with Part 15 of the FCC Rules.

7 • The dome camera features built-in heat generating circuitry. Take care not to touch the internal parts marked “Caution! High Temperature” when working inside the camera during dome cleaning or maintenance . • Avoid directly touching the dome surface, since camera picture quality could deteriorat...

Page 9 - (22) Hook to connect safety wire for housing

(1) Top cover (2) Safety wire for housing (3) Housing adaptor (4) Safety screw (5) Dome cover (6) Decorative frame (7) Sunshade (Outside) (8) Case (Inside) (9) Hexagon sleeve (10) Safety wire for dome cover (11) Camera unit fixing screw (12) Surge protector GND (13) COM SW* (14) COM LED* (15) COM PO...

Page 10 - Precautions When Installing the Camera; lamps. Failure to do this could downgrade the picture quality.; Power cable

10 6.1. Precautions When Installing the Camera • Insulate the joint of the camera video output cable and the coaxial cable from other equipment by wrapping the (vinyl) insulating tape around it. Also, install such cables taking care that they do not contact metal stuffclose to them. • Avoid install ...

Page 11 - Notes

11 GND GND Connect to the next cameraʼs terminal Camera control cable Camera control cable Shield twisted pair cable Connect to remote controllerʼs camera control terminal 6.2. Camera Control Connector Connection (RS-485) • Connect terminals (+) and (–) of the C-RM500 Remote Controller or the C-IF50...

Page 12 - DIP SW1

7.3.1. Camera Address Setting Switch (DIP Switch 1: No. 1 – 8) Used to set camera address when using the camera in connection with the C-RM500 Remote Controller. Setthe DIP switch so that the address is equal to the connected switcher's channel number. The relationshipbetween switch settings and cam...

Page 13 - Clock information and backup data are not erased.

13 7.3.5. Termination Switch (DIP switch 2: No. 8) Set the switch of the camera last connected to the RS-485 communications line to ON. (Factory setting: OFF) 7.3.2. Communication Speed Setting Switch (DIP switch 2: No. 1 – 2) Check to be sure that the communication speed set here is the same as tha...

Page 18 - Pole Mounting Bracket and 2 YS-60B Mounting Bands in combination.

18 8.1. About Installation • Mount the camera to a heavy-duty wall surface using the optional C-BC711W Wall Mounting Bracket. • When installing the camera on a pole, use the optional C-BC711W Wall Mounting Bracket, C-BC711PM Pole Mounting Bracket and 2 YS-60B Mounting Bands in combination. • Mount t...

Page 19 - Use the optional C-BC711W Wall Mounting Bracket.; for the wall's structure and composition.; Make a cable entry hole of ø 50 – 100mm on a wall.

19 8.3. Wall Mounting Bracket Installation Use the optional C-BC711W Wall Mounting Bracket. Notes • Check to be sure that wall surface can structurally support the weight of the camera and mounting bracket• Bolts, nuts and washers are not supplied with the bracket. Use bolts, nuts and washers that a...

Page 20 - Attaching Housing and Camera Unit to Wall Mounting Bracket

20 8.4. Attaching Housing and Camera Unit to Wall Mounting Bracket 1. Loosen 2 safety screws. 2. Run the safety wire through the top cover, then hang the hook to the mounting bracket. 3. Run the top cover through the pipe, then connect cables. Top cover Wall surface Safety wire Housing Insulate the ...

Page 21 - Tighten 3 screws equally and ensure that no parts rattle.; Figure viewed from the top.

21 5. Using the 3 supplied camera mounting screws M5 x 12, attach the housing unit to pipe. Tighten 3 screws equally and ensure that no parts rattle. Note: In this event, tighten screws while pressing the housing against the pipe. 4. After confirming the housing direction, push the housing up, then ...

Page 22 - Align

22 7. Connect the safety wire to the housing projection, then attach the camera unit. Note: Align mark of the camera unit with that of the housing when attaching the camera unit to the housing. Hang the safety wire. Safety wire mark 6. Using the supplied 3 hexagon socket screws, attach the top cover...

Page 27 - Attach the wall mounting bracket to the pole mounting bracket.; are the same as that of wall mounting.

27 8.5. Pole Mounting Bracket Installation The optional C-BC711PM Pole Mounting Bracket, C-BC711W Wall Mounting Bracket and YS-60B MountingBand are required to mount the camera on a pole. Note Those mounting brackets and band can be installed on a pole having a mounting pipe diameter of 90 - 340mm. ...

Page 28 - Make a cable entry hole of ø 50 – 100mm on a ceiling.

28 8.6. Suspension Bracket Installation The C-BC711P Suspension Bracket is required to suspend the camera from a ceiling. Note Mount the bracket to a concrete wall or robustly constructed wall surface that can sufficiently withstand theweight of the units. 1. Make a cable entry hole of ø 50 – 100mm ...

Page 32 - Wall Mounting Bracket:

• Accessories CD-R (CAMARA CONTROLLER Software, installation manual) ...... 1Hexagon socket screw M4 x 8 ............................................................ 3 • Optional Products Wall Mounting Bracket: C-BC711W Suspension Bracket: C-BC711P Pole Mounting Bracket: C-BC711PM Mounting Band: YS-...