Tiger JD 62-6430 - Manuals - manualsarea.com

Page 3 - FORWARD; Tiger Corporation

FORWARD This manual contains information about many features of the Tiger mowing and roadside maintenance equipment. Some of these include: Safety precautions,Assembly instructions, Operations, Maintenance and Parts. This manual will alsoassist you in the proper break-in, daily care, and troubleshoo...

Page 5 - TABLE OF CONTENTS; This symbol means; CAUTION – YOUR SAFETY IS AT RISK!; When you see this symbol, read and

TABLE OF CONTENTS SAFETY SECTION _____________________________________ 1 ASSEMBLY / MOUNTING SECTION ______________________ 2 OPERATION SECTION _________________________________ 3 MAINTENANCE SECTION ______________________________ 4 PARTS SECTION ______________________________________ 5 WARRANTY INF...

Page 7 - SAFETY SECTION

Page 8 - SAFETY; GENERAL SAFETY INSTRUCTIONS AND PRACTICES

SAFETY Front & Mid Plow Wings Safety Section 1-2 © 2009 Alamo Group Inc. SAFETY GENERAL SAFETY INSTRUCTIONS AND PRACTICES A careful operator is the best operator. Safety is of primary importance to the manufacturer and should be tothe owner/operator. Most accidents can be avoided by being aware ...

Page 10 - OPERATOR SAFETY INSTRUCTIONS AND PRACTICES

SAFETY Front & Mid Plow Wings Safety Section 1-4 © 2009 Alamo Group Inc. SAFETY OPERATOR SAFETY INSTRUCTIONS AND PRACTICES A l l S a f e t y S h i e l d s , G u a r d s a n d o t h e r P r o t e c t i v e S a f e t y d e v i c e s s h o u l d b e u s e d a n dm a i n t a i n e d i n g o o d w o ...

Page 19 - TRANSPORTING SAFETY INSTRUCTIONS AND PRACTICES

SAFETY Front & Mid Plow Wings Safety Section 1-13 © 2009 Alamo Group Inc. SAFETY TRANSPORTING SAFETY INSTRUCTIONS AND PRACTICES S e c u r e t h e w i n g f o r t r a n s p o r t w h e n n o t p l o w i n g . S e c u r e w i n g i n t r a n s p o r tp o s i t i o n u s i n g w i n g t r a n s p o...

Page 22 - ASSEMBLY; Before attempting to mount or service your Tiger

Assembly Section 2-2 ASSEMBLY Before attempting to mount or service your Tiger equipment, it is important to read and understand all of theinformation in the Safety section of this manual. Check complete shipment list against the packing list to make sure there are no shortages. Make certain the tra...

Page 23 - MULTIPLIER VALVE CONTROLLER WIRING

Assembly Section 2-3 ASSEMBLY MULTIPLIER VALVE CONTROLLER MOUNTING The Multiplier Valve Controller comes with two worm-screw ties that are used to attach the Controller to the Tractor Joystick as shown below. The Multiplier Valve Controller can also be attached to the tractors’ joystick by removing ...

Page 28 - BE SURE THE BALL VALVES ARE OPEN!; Before operating the plows

Assembly Section 2-8 ASSEMBLY FINAL PREPARATION FOR OPERATION Place operators safety and operation decals on the steering column and side counsel where they are clearly visible to the operator. These decals should be understood byeach operator of the machine in conjunction with the safety and operat...

Page 29 - OPERATION

Snow Plow Operation Section 3-1 OPERATION OPERATION SECTION

Page 30 - Safety; Safety Alert Symbol; Before any operation of tractor and equipment

Snow Plow Operation Section 3-2 OPERATION Safety is of primary importance to the owner / operator and to the manufacturer. The first section of this manual includes a list of Safety Messages, that, if followed,will help protect the operator and bystanders from injury or death. Many of themessages wi...

Page 31 - After the first day of operation, all bolts should be checked and; PUSH ARM STOP POSITION

Snow Plow Operation Section 3-3 OPERATION The Push Arm Stop height is controlled with the 3-point hitch control lever. Follow the instructions for this control is the tractor operators manual. The 3-point should be set inits lowest position. With the 3-point in its lowest position, adjust the 3-poin...

Page 32 - Transporting unit by flatbed trailer:

Snow Plow Operation Section 3-4 OPERATION TRANSPORTING MOWER ON A TRAILER Transporting unit by flatbed trailer: Most tractors with a side mounted plow attached will be over legal transporting width (102” wide). For this reason, one of the following procedures must befollowed. 1: Transporting with si...

Page 33 - DO NOT OPERATE an UNSAFE TRACTOR or MOWER

Snow Plow Operation Section 3-5 OPERATION TRACTOR PRE-OPERATION Inspection Tractor ID#____________ Make_____________________ Date:__________________ Shift______________________ Before conducting the inspection, make sure the Tractor engine is off, all rotationhas stop and the tractor is in the Park ...

Page 35 - MAINTENANCE

Page 36 - IN SEASON MAINTENANCE; REPAIR; It is recommended to re-torque all bolts after the first 8 hours

Page 2 of 3 IN SEASON MAINTENANCE Snow removal equipment must be cared for and maintained regularly. Daily or pre-route inspection and maintenance are necessary. Failure to do so may affect efficiency and safety. A visual inspection must be carried out after every 8 hours of operation. Look for dama...

Page 37 - END OF SEASON MAINTENANCE; GROUND ENGAGING COMPONENTS; designed to shear; CHECK WELDMENTS FOR CRACKS.; REPLACE WORN OR BROKEN PARTS FOUND BY ABOVE INSPECTIONS.

Page 3 of 3 END OF SEASON MAINTENANCE GROUND ENGAGING COMPONENTS CUTTING EDGES & GUARDS Replace any broken cutting edges, unevenly or excessively worn cutting edges, and broken or worn wear guards. RUNNING GEAR Replace broken, worn, or missing running gear shoes, and any damaged adjuster leg com...

Page 38 - NOTES

Page 40 - Tiger; Direct any questions regarding parts to:; PARTS ORDERING GUIDE

JD6030 SNOW PLOW Parts Section 5-2 The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this manual. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in...

Page 41 - PARTS SECTION TABLE OF CONTENTS; SECTION

JD6030 SNOW PLOW Parts Section 5-3 PARTS SECTION TABLE OF CONTENTS SECTION PAGE TRACTOR SPECIFIC PARTS: TRACTOR MOUNT KIT - MAIN FRAME 5-4 TRACTOR MOUNT KIT - FRONT HYDRAULICS 5-5 TRACTOR MOUNT KIT - PUMP HOSES 5-6 TRACTOR MOUNT KIT - SIDE HYDRAULICS 5-8 3-POINT STOP & PUSH ARM 5-10 MULTIPLIER V...

Page 42 - TRACTOR MOUNT KIT - MAIN FRAME

JD6030 SNOW PLOW Parts Section 5-4 TRACTOR MOUNT KIT - MAIN FRAME 12-07-06 ITEM PART NO. QTY DESCRIPTION 1 REF * MAIN FRAME 2 06300118 1 SIDE PLOW WELDMENT 3 21688 3 CAPSCREW,7/16 x 3-1/4,NC 4 06420125 2 PIN,1.50 X 4 5 21677 3 NYLOCK NUT,7/16,NC 6 06300116 1 PUSH FRAME 7 33764 8 FLATWASHER,5/8,SAE,G...

Page 43 - TRACTOR MOUNT KIT - FRONT HYDRAULICS

JD6030 SNOW PLOW Parts Section 5-5 TRACTOR MOUNT KIT - FRONT HYDRAULICS 12-07-06 ITEM PART NO. QTY DESCRIPTION 1 REF * MAIN FRAME 2 32900 5 QUICK CPLR,MALE,1/2 x 1/2FOR 3 33271 4 ADAPTER,1/2MOR x 3/8MJ 4 06500510 2 HOSE,1/4 x 170 5 06503147 2 FITTING,BLKHD,1/2MJ x 1/2MOR 6 33382 2 ELBOW,1/2MOR x 1/2...

Page 44 - TRACTOR MOUNT KIT - PUMP HOSES

JD6030 SNOW PLOW Parts Section 5-6 TRACTOR MOUNT KIT - PUMP HOSES ITEM PART NO. QTY DESCRIPTION 1 06500258 1 HOSE,1-1/4 x 70 (FROM TANK TO PUMP) 2 TF4852 2 FLANGE KIT,#20 3 06500512 1 HOSE,1 x 70 (FROM PUMP TO BRAKE VALVE) REPLACE EXISTING HOSESIF NECESSARY

Page 45 - PAGE INTENSIONALLY

JD6030 SNOW PLOW Parts Section 5-7 NOTES PAGE INTENSIONALLY LEFT BLANK

Page 46 - TRACTOR MOUNT KIT - SIDE HYDRAULICS

JD6030 SNOW PLOW Parts Section 5-8 12-04-06 TRACTOR MOUNT KIT - SIDE HYDRAULICS

Page 50 - MULTIPLIER VALVE MOUNTING

JD6030 SNOW PLOW Parts Section 5-12 MULTIPLIER VALVE MOUNTING ITEM PART NO. QTY. DESCRIPTION 1 32900 2 QUICK CPLR,MALE,1/2 x 1/2FOR 2 33382 2 ELBOW,1/2MOR x 1/2MJ X 90 3 06500251 1 HOSE,1/2 x 28 4 21577 4 NYLOCK NUT,5/16,NC 5 06500122 1 HOSE,1/2 x 30 6 33528 2 ADAPTER,1/2MOR x 1/2MJIC 7 21579 4 CAPS...

Page 51 - & 4 FUNCTION MULTIPLIER VALVE BREAKDOWN

JD6030 SNOW PLOW Parts Section 5-13 3 & 4 FUNCTION MULTIPLIER VALVE BREAKDOWN ITEM PART NO. QTY DESCRIPTION 1 * REF SMALL NUT (NOT FOR PARTS SALE) 2 06505165 REF SOLENOID 12V SP 3 06505164 REF N/C CARTRIDGE (SPOOL W/SHORT NUT) 4 * REF MANIFOLD (NOT FOR PARTS SALE) * 06510231 1 CONTROLLER,4 BUTTO...

Page 52 - FUNCTION MULTIPLIER VALVE BREAKDOWN

JD6030 SNOW PLOW Parts Section 5-14 2 FUNCTION MULTIPLIER VALVE BREAKDOWN ITEM PART NO. QTY DESCRIPTION 1 * REF SMALL NUT (NOT FOR PARTS SALE) 2 06505165 4 SOLENOID 12V SP 3 06505163 2 N/O CARTRIDGE (SPOOL W/SHORT NUT) 4 * REF MANIFOLD (NOT FOR PARTS SALE) 5 06505164 2 N/C CARTRIDGE (SPOOL W/SHORT N...

Page 53 - FUNCTION MULTIPLIER VALVE BREAKDOWN; TWO REQUIRED

JD6030 SNOW PLOW Parts Section 5-15 1 FUNCTION MULTIPLIER VALVE BREAKDOWN ITEM PART NO. QTY DESCRIPTION 1 * REF TALL NUT (NOT FOR PARTS SALE) 2 06505162 2 SOLENOID 12V SS 3 06505161 1 N/O CARTRIDGE (POPPET W/TALL NUT) 4 * REF MANIFOLD (NOT FOR PARTS SALE) 5 06505160 1 N/C CARTRIDGE (SPOOL W/SHORT NU...

Page 54 - SAFETY LIGHT ASSEMBLY; SAFETY LIGHT INSTALLATION

JD6030 SNOW PLOW Parts Section 5-16 R 03-01 ITEM P/N QTY DESCRIPTION * 06200420 AVAIL SAFETY LIGHT KIT (INCLUDES ITEMS 1 THRU 9) 1 34800 1 MOUNT,JD62-6420,ASAE 279.11 2 21529 5 CAPSCREW,1/4" X 3/4" NC 3 21527 3 NUT,NYLOCK,1/4" NC 4 34859 1 MARKER LIGHT ASY 5 21986 2 LOCKWASHER 1/4” 6 315...

Page 57 - WARRANTY INFORMATION; THERE ARE NO WARRANTIES WHICH EXTEND; AFTER

WARRANTY INFORMATION Tiger Corporation, 3301 N. Louise, Sioux Falls, South Dakota, warrants to the original Retail Customer, the new Tiger equipment is free of defects in material andworkmanship. Any part of equipment that in Tiger’s judgement, show evidence ofsuch defects will be repaired or replac...