Thomson RT2350BK - Manuals

Getting Started Unpacking the Receiver You should receive the following items: 2 MUTE BASS/TREBLE VOLUME LEVEL H O M E T H E A T E R A U D I O V I D E O R E C E I V E R PHONES TUNING MEMORY FM/AM SETUP TEST TONE EQ DIGITAL INPUT ST / MONO OK SURR MODE DSP MODE SOURCE VIDEO V-AUX L - AUDIO - R SOURCE...

Getting Started Unpacking The Speakers • one set of speakers including 2 front speakers, 1centre speaker, 1 subwoofer and 2 rear speakers. • 6 speaker wires including: Inserting Batteries into Remote Control Insert two AA(R6) batteries according to the + and -signs on the battery compartment. To use...

Getting Started Connecting to Audio-Visual Components 4 OPTICAL 1 TV VCR CD Player Tape Deck SAT to LINE OUT(Tape Deck) to LINE IN ( Tape Deck ) to AUDIO OUT (CD) to VIDEO OUT (SA T) to AUDIO OUT (SA T) to S-VIDEO OUT (SA T) to S-VIDEO OUT (DVD) to AUDIO OUT(DVD) to VIDEO OUT (DVD) to AUDIO OUT (TV)...

Getting Started EN 5 Digital Connections Read instructions carefully when connecting compo-nents to the receiver. Digital In Jacks can accept Dolby Digital (AC-3), DTS(RT2600 only) or PCM signals when compatible components are connected. Connecting the Antennas The AM and FM antennas connect to the ...

Getting Started Connecting the Speakers Speakers There are 6 speakers equipped with the unit (2 front,1 center, 2 rear, 1 subwoofer). In order to enjoy goodsurround effects, all six speakers need to be connected to the receiver. At least two front speakers (left and right) arerequired. For better so...

Getting Started Positioning your speaker 1 Left, Right (Front Speakers) They carry primarily music and sound effects 2 Center In surround mode, the center speaker carries much ofthe dialogue as well as music and effects. It should beset between the left and right speakers. 3 Surround (Rear Speakers)...

Getting Started Preferred surround placement Location If possible, place surround speakers to either side ofthe listening area, not behind it. Height If space permits, install surrounds 2-3 feet aboveviewers. This helps to minimize localization effects. Aiming Aiming surrounds straight across the ro...

Getting Started EN 9 Test Tone / Channel balance Channel balance Your receiver is equipped with a test signal generatorfor balancing the channels. As the signal "travels"from channel to channel, adjust the level controlsuntil each channel plays at the same loudness level. Level adjustment &a...

MUTE BASS/TREBLE VOLUME LEVEL H O M E T H E A T E R A U D I O V I D E O R E C E I V E R PHONES TUNING MEMORY FM/AM SETUP TEST TONE EQ DIGITAL INPUT ST / MONO OK SURR MODE DSP MODE SOURCE VIDEO V-AUX L - AUDIO - R SOURCE ON/STANDBY Operating Your Receiver Receiver Controls 1. STANDBY/ON To turn the u...

Operating Your Receiver EN 11 Your Remote Control Please be sure you have inserted the batteries into theremote control (see relevant section on page 3.) You cantest it by pressing any button. If it works, the red LEDwill light. 1. ON/OFF To turn on or off the receiver and other auxiliary compo-nent...

Operating Your Receiver S RS R C • Audio output is in dts mode (RT2600 only) • Audio output is in Dolby Digital mode. • Audio output is in Dolby Pro Logic mode. • Audio output is in Dolby Pro Logic II mode. (RT2600 only) • Tuner stereo signal detected. • Tuner station detected. • Speaker Icons. • Un...

Operating Your Receiver EN 13 Switching on/off • To switch on the receiver, press ON/STANDBY button once, or any source button on the remotecontrol. • Standby: when the receiver is on, press the ON/STANDBY button once to activate the standby mode. • To switch off the unit completely, unplug thepower...

Operating your Receiver You can connect up to 7 audio/video sources to thisamplifier: Source button Corresponding connector (receiver front panel) (receiver back panel) - DVD DVD IN (audio / video) - SAT SAT IN (audio / video) - VCR VCR IN/OUT (audio / video) - V-AUX V-AUX IN (audio / video) - CD CD...

Operating your Receiver EN 15 Using the receiver to play a source After having properly connected a source (DVD, CD,VCR) to the receiver, you can partly control themthrough the receiver. Playing a DVD with the receiver 1. Connect a DVD player to the receiver (see connect-ing your receiver for detail...

Operating your Receiver Operating the Radio The receiver has a built-in tuner that allows forAM/FM radio function. Manual tuning 1. Connect the FM and AM antenna accordingly (see"Connecting the Antenna" on page 5 section fordetails) 2. Press ON/STANDBY to switch on the receiver. 3. Press SOU...

EN 17 Operating your Receiver Storing radio stations: The receiver can store up to 40 radio stations inmemory. You can enter every single radio stationyourself or the receiver can store all available radiostation automatically in an ascending order. Automatic preset storing : (FM only) 1. Select the...

Operating your Receiver Retrieving preset stations 1. Press FM/AM to select tuner mode 2. Press MEMORY/MENU button to enter preset set- ting mode ( MEMORY icon shows on display), Press TUNING UP/DOWN to select preset station. 6 Channel external input (RT2600 only) An external decoder (Dts, Dolby Dig...

EN 19 Advanced Sound Control Sound Enhancement Systems This receiver is equipped with several built-in soundenhancement systems. Dolby Pro Logic II (RT2600 only) The Pro Logic II mode uses the built-in circuit to steer theLeft, Center, Right and Surround left and right channelaudio signals and uses ...

20 Advanced Sound Control Stereo The Stereo mode uses the two main channel outputsfrom the front speakers. Use this mode if you haveconnected the front speakers only. DSP (Digital Sound Processor) These digital sound effects resemble sounds in a real environment such as (STADIUM / THEATER / CONCERT ...

EN 21 Advanced Sound Control Fine Setting of the Speakers This receiver supports a wide range of speakers and subwoofers. For optimal surround sound enjoyment,you need to register the speaker selection settings ofyour audio system. If you buy this receiver withaccompanied speaker package, then this ...

22 Advance Sound Control Use a subwoofer to enjoy optimum sound.• Subwoofer Phase: Try both settings and select the sound preferred.• Speaker distance: For optimum surround experi- ence measure the distance between the speaker andyour favorite listening position. 1. Press SETUP once. 2. While the VF...

EN 23 Care and Maintenance Troubleshooting Tips Receiver/Tuner Operation ST indicator is off. • Adjust the antenna.• Press DIGITAL INPUT/ST/MONO button to insure you are not outputting in mono. The signal is Mono. Severe hum or noise. • The signal is too weak. Connect an external antenna.• Adjust An...

24 Remote Codes CABLE CODES ABC 5002, 5003, 5004, 5005, 5006, 5009, 5053 ANTRONIX 5008, 5009 ARCHER 5008, 5009, 5010, 5011 CABLETENNA 5008 CABLEVIEW 5008 CENTURY 5011 CITIZEN 5011 COLOUR VOICE 5012, 5013 COMTRONICS 5014, 5015 CONTEC 5016 EASTERN 5017 GARRARD 5011 GC ELECTRONICS 5009 GEMINI 5018, 501...

EN 25 Remote Codes MEMOREX 2002, 2011, 2013, 2014, 2021, 2023, 2026,2104, 2131 MGA 2029, 2065, 2113 MGN TECHNOLOGY 2013 MIDLAND 2053 MINOLTA 2055, 2056, 2107 MITSUBISHI 2029, 2055, 2056, 2065, 2066, 2067, 2069,2070, 2071, 2072, 2073, 2074, 2106, 2113, 2123 MONTGOMERY WARD 2075, 2131 MOTOROLA 2021, 2...

26 Remote Codes KAWASHO 1002, 1004, 1006 KAYPANI 1175 KENWOOD 1004, 1006, 1019 KLOSS NOVABEAM 1068, 1069, 1174, 1183 KTV 1038, 1070, 1171, 1176, 1177 LOEWE 1062 LOGIK 1083 LUXMAN 1004, 1006 LXI 1000, 1006, 1049, 1062, 1071, 1072, 1073,1162, 1181 MAGNAVOX 1004, 1006, 1008, 1019, 1062, 1068, 1069,1074...