Thomson EZCRG - Manuals

6. Place 1 sealing washer (rubber side towards vehicle floor) and 1 large fender washer over each of the floor bolts and attach the floor nuts. In addition tothe sealing washer, it may be desirable to place a small circle of siliconsealer around the hole under the vehicle before installing the washe...

7 Figure 3 DOOR DOOR LATCH CABLE NOTCHES DC 12V INPUT ANTENNA TERMINAL ANTENNA JACK NUTANTENNA JACK OF FOIL DIPOLE DC 12V DETAIL VIDEO L AUDIO R OUTPUT

8 H. Connecting an External Antenna (Refer to Figure 3) 1. Originally, the antenna jack of the built-in foil dipole has already been connected to the antenna terminal behind the door at the rear of the console. 2. In case of poor images with the foil dipole, loosen the nut around the an- tenna jack,...

has accumulated inside of VCP. In this case, the VCP will not operate, andno VCP controls will be functional, except for the VCP power button on theremote control, until the unit dries out sufficiently and the word DEWdisappears from the screen. When DEW mode has been activated, leave theVCP on to a...