TEAC G-0s - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; CAUTION

2 CAUTION < D O N O T R E M O V E T H E E X T E R N A L C A S E S O R C A B I N E T S T OEXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS AREWITHIN! < IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT,CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THEPRODUCT UNTIL IT HAS BEEN REPAIRED. <...

Page 3 - Read this before operation; Placement of the unit

3 Contents Thank you for choosing TEAC. Read this manual carefullyto get the best performance from this unit. IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . 2 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . ...

Page 4 - Features; Up to 192 kHz Word Sync clock production

4 Features Up to 192 kHz Word Sync clock production With the advent of digital equipment using higher samplingfrequencies than ever, 176.4 kHz and 192 kHz word clocks(sync signals) are made available in addition to conventional44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz clocks.As an additional plus, the o...

Page 5 - Names of Each Control; MASTER button; UNIVERSAL CLOCK OUT button

5 Names of Each Control STANDBY/ON button When the Main Power switch on the rear panel is ON, usethis button to turn the unit on or to standby. When the unitis on, the indicator lights. MASTER button Press this button to select the signal source you will use forthe reference frequency. When the cloc...

Page 6 - Connections

External rubidium 10MHz oscillator, etc. 10MHz OUT Universal player, etc. CD transport, etc. D/A converter, etc. WORD SYNC IN UNIVERSAL CLOCK IN WORD SYNC IN D A B C E F 6 Connections CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each co...

Page 8 - Set Up for Esoteric Units; Press the STANDBY/ON button to turn the unit on.; Select 44.1kHz using the FREQUENCY MODE button.

8 2 3 4 5 Set Up for Esoteric Units This is the recommended set up for synchronization withTEAC-ESOTERIC CD units: P-70, X-01, UX-1, P-01, D-01 Connect WORD CLOCK OUT terminals to WORD SYNC INterminals of each unit using commercially available BNCcoaxial cables. P-70: turn ON the WORD SYNC IN switch...

Page 10 - No power; Not synchronized; Maintenance

10 Dimmer Troubleshooting The front display can be dimmed to suit your preferredenvironment. There are two levels and an “off” setting. Press the A button for more than 2 seconds to switchthe dimmer mode. LEd OFF 1: All the illuminations are turned off except the MASTERbutton indicator (Xtal, Rb, Ex...

Page 11 - Specifications

11 Specifications Clock outputs 44.1 kHz lines . . . . . . . . . . . . . 44.1 kHz, 88.2 kHz, 176.4 kHz48 kHz lines . . . . . . . . . . . . . . . . . . . 48 kHz, 96 kHz, 192 kHzPAL FILM lines . . . . . . . . . . 46.08 kHz, 92.1 6kHz, 184.32 kHzUNIVERSAL CLOCK lines . . . . . . . . . . . . . . . . 100...

Page 12 - TEAC CORPORATION

1004.MA-0945A Z This appliance has a serial number located on the rear panel. Please recordthe model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC. 77...