Taylor 1526 - Manuals - manualsarea.com

Page 2 - Welcome to the Taylor; Table of Contents; TroubleShooting

Welcome to the Taylor ® WeatherGuide System. Simple, reliable, accurate…it allows you to monitor indoor or outdoor locations fromone room. The base unit reads indoor conditions, while the remotesensor wirelessly reports outdoor weather conditions back to the baseunit for an all-in-one weather displa...

Page 3 - To Power your WeatherGuide; Base Unit; How to Set up Your WeatherGuide

To Power your WeatherGuide ™ Base Unit Your WeatherGuide™ base unit is powered by 2 AAA batteries (notincluded). Remove the battery compartment cover on the back of the unit.Install 2 AAA batteries. Replace the battery compartment cover.Important: Power the base unit before installing batteries in t...

Page 5 - How to Display your WeatherGuideTM; Table top; – use the Table Stand on the back of the base and remote; Wall; – use the keyhole on the back of the base and remote sensor units.; Base unit location –; Though the remote unit is weather proof, it should be; Keyhole

How to Display your WeatherGuide™ Table top – use the Table Stand on the back of the base and remote sensor units Wall – use the keyhole on the back of the base and remote sensor units. Base Unit Remote Sensor Base unit location – Place the unit indoors in a well-ventilated location away from direct...

Page 6 - Atomic Clock and Calendar

Atomic Clock and Calendar Your WeatherGuide™ has a radio-controlled clock/calendar that setsitself to the radio signal transmitted by the U.S. Atomic Clock locatedin Colorado. To synchronize the atomic clock: 1. Press and hold the “-PMCE/RCC” button on the back of the base unit. The unit will beep. ...

Page 7 - How to Set the Clock Manually; To manually set the clock:; Repeat to set rest of

7 How to Set the Clock Manually To manually set the clock: 1. Press and hold the “SET/AL” button. The unit will beep. 2. Press “+C/F” or “-PMCE/RCC” to set the seconds to zero. Press“SET/AL” to enter. 3. Press “+C/F” or “-PMCE/RCC” to change the hours. Press “SET/AL” toenter. 4. Press “+C/F” or “-PM...

Page 8 - Daylight Savings Time; How to Set the Alarm

Tip: Hold down the “+C/F” or “-PMCE/RCC” buttons to advance the dig-its quickly. Daylight Savings Time – to turn DST on, press “MODE” until “OFF” appears inthe clock digits. Press and hold the“SET/AL” button until it switches to “ON”.DST is now on. Press “MODE” to returnto the clock display. How to ...

Page 9 - Repeat to set minutes.

2. Press and hold the “SET/AL” button.Theunit will beep and the alarm’s hour digitswill flash. 3. Press “+C/F” or “-PMCE/RCC” tochange the hours. Press “SET/AL” to enter.The minutes will flash. 4. Press “+C/F” or “-PMCE/RCC” tochange the minutes. Press “SET/AL” toenter.The unit will return to the cl...

Page 10 - icon will flash as long as the snooze is

To turn off the alarm: Press “MODE” until the Alarm display ap-pears. Press the “SET/AL” button. Thealarm icon will disappear. The alarm isturned off. Snooze feature Press the “Snooze/Light” button on the topof the base unit to silence the alarm for 5minutes.A icon will flash as long as the snooze i...

Page 11 - How to read your WeatherGuideTM

11 How to read your WeatherGuide™ The base unit displays indoor conditions from its location.The remote unit will transmit weather readings from its location backto the base unit.Alternately, the remote sensor’s probe cord may be used. Plug theprobe cord into the rubber plug on the remote sensor. Al...

Page 12 - Auto Scroll feature; – the base unit can; Temperature/Humidity Readings; Indoor temperature readings; – these; Outdoor temperature readings; Outdoor humidity readings; – these are

12 Auto Scroll feature – the base unit can be set to automatically scroll through read-ings. To activate Auto Scroll, press the“Channel” button on the back of the baseunit until the auto scroll symbol appears onthe LCD. The base unit will automaticallydisplay base and remote readings for 10seconds e...

Page 14 - Temperature Trend Indicators; indicates Steady Temperature readings; Humidity Trend Indicators; indicates Steady Humidity readings

14 Temperature Trend Indicators Your WeatherGuide™ will indicate if temperatures are rising, falling,or steady. indicates Rising Temperatures readings(temperatures have gone up more than 2degrees in an hour) indicates Steady Temperature readings indicates Falling Temperatures (tempera-tures have gon...

Page 15 - 2-24 Hour Weather Forecast

12-24 Hour Weather Forecast Your WeatherGuide™ will estimate weather conditions over the next12 to 24 hours. These estimates are based on altitude and changes inbarometric pressure. One of these weather icons will appear at the top of the display: 15 Sunny Becoming Cloudy Cloudy Rain Stormy Snowy Sn...

Page 16 - Backlight Feature; To Switch Between °F and °C; on the LCD indicates the batteries are running low and should

16 Backlight Feature The base unit has a backlight for easy viewing of the screen. Press the“Snooze/Light” button to turn the backlight on for 3 seconds. Press SNOOZE/LIGHT for a 3 second backlight To Switch Between °F and °C Press the “+C/F” button to switch betweenFahrenheit and Celsius temperatur...

Page 17 - Disconnected Signals

17 Trouble-Shooting Disconnected Signals If the receiver unit does not receive a transmission from a remote chan-nel for 1 hour, the display will show dashes.To correct this problem:1. Check that the remote is properly positioned, within the appro-priate transmission range. Transmissions are vastly ...

Page 18 - Transmission Collision; This equipment has been tested and found to comply with the; Problem Solving; If the LCD readout is faint, replace the batteries.

18 Transmission Collision Signals from other household devices, such as doorbells, home securitysystems and entry controls, may interfere.This is normal and does notaffect the general performance of this product. The transmission willresume once the interference recedes. Note: This equipment has bee...

Page 20 - One Year Warranty; Taylor Precision Products

20 1526 8.08 One Year Warranty This product is warranted against defects in materials or workmanshipfor one (1) year from date of original purchase. It does not coverdamages or wear resulting from accident, misuse, abuse, commercialuse, or unauthorized adjustment and/or repair. Should this product r...