Taylor 1524 - Manuals - manualsarea.com

Page 2 - Welcome to the Taylor; Table of Contents; TroubleShooting

Welcome to the Taylor ® WeatherGuide System. Simple, reliable, accurate…it allows you to monitor indoor or outdoor locations fromone room. The base unit reads indoor conditions, while the remotesensor wirelessly reports outdoor weather conditions back to the baseunit for an all-in-one weather displa...

Page 3 - To Power your WeatherGuide; Base Unit; How to Set up Your WeatherGuide

To Power your WeatherGuide ™ Base Unit Your WeatherGuide™ base unit is powered by 2 AAA batteries (notincluded). Remove the battery compartment cover located on the back ofthe unit. Install 2 AAA batteries. Replace the battery compart-ment cover.Important: Power the base unit before installing batte...

Page 4 - If the transmission is successful, the remote

Transmission successful 4 If the transmission is successful, the remote sensor readings and a icon will appear on the base unit. If dashes are still displayedon the receiver unit, press the Tx buttonagain. Replace the remote’s battery compart-ment cover. The remote will automatically transmit readin...

Page 5 - How to Display your WeatherGuideTM; Table top; – use the Table Stand on the back of the base and remote; Wall; – use the keyhole on the back of the base and remote sensor units.; Base unit location –; Though the remote unit is weather proof, it should be

Keyhole Table Stand 5 How to Display your WeatherGuide™ Table top – use the Table Stand on the back of the base and remote sensor units Wall – use the keyhole on the back of the base and remote sensor units. Base Unit Remote Sensor Base unit location – Place the unit indoors in a well-ventilated loc...

Page 6 - How to Read Your WeatherGuideTM

How to Read Your WeatherGuide™ The base unit displays indoor conditions from its location.The remote unit will transmit weather readings from its location backto the base unit.Alternately, the remote sensor’s probe cord may be used. Plug theprobe cord into the rubber plug on the remote sensor. Allow...

Page 7 - Auto Scroll feature; – the base unit can; Temperature Readings; Indoor temperature readings; – these; Outdoor temperature readings

Auto Scroll feature – the base unit can be set to automatically scroll through read-ings. To activate Auto Scroll, press the“Channel” button on the back of the baseunit until the auto scroll symbol appears onthe LCD. The base unit will automaticallydisplay base and remote readings for 10seconds each...

Page 9 - Temperature Trend Indicators; indicates Steady Temperature readings; To Switch Between °F and °C; on the LCD indicates the batteries are running low and should

Temperature Trend Indicators Your WeatherGuide™ will indicate if temperatures are rising, falling,or steady. indicates Rising Temperatures readings(temperatures have gone up more than 2degrees in an hour) indicates Steady Temperature readings indicates Falling Temperatures (tempera-tures have gone d...

Page 10 - Disconnected Signals

Trouble-Shooting Disconnected Signals If the receiver unit does not receive a transmission from a remote chan-nel for 1 hour, the display will show dashes.To correct this problem:1. Check that the remote is properly positioned, within the appro-priate transmission range. Transmissions are vastly aff...

Page 11 - Transmission Collision; This equipment has been tested and found to comply with the; Problem Solving; If the LCD readout is faint, replace the batteries.

Transmission Collision Signals from other household devices, such as doorbells, home securitysystems and entry controls, may interfere.This is normal and does notaffect the general performance of this product. The transmission willresume once the interference recedes. Note: This equipment has been t...

Page 12 - Precautions

Precautions 1. The receiver is intended for indoor use only. It is not sealedagainst moisture and could be damaged if used outdoors. 2. Do not immerse the unit in water. If you spill liquid on it, dry im-mediately with a soft, lint-free cloth. 3. Do not clean the unit with abrasive or corrosive mate...

Page 13 - Specifications

Specifications Range of temperature measurement:Receiver unit (indoor only): 14°F to 158°F (-10°C to 70°C)Remote unit: -40°F to 158°F (-40°C to 70°C)Resolution: 0.1 degree for temperatureTemperature trends – rising, falling or steadyMinimum/Maximum daily temperature recordsLow Battery IndicatorChann...

Page 14 - One Year Warranty; Taylor Precision Products

One Year Warranty This product is warranted against defects in materials or workmanshipfor one (1) year from date of original purchase. It does not coverdamages or wear resulting from accident, misuse, abuse, commercialuse, or unauthorized adjustment and/or repair. Should this product re-quire servi...

Page 15 - Made to our exact specifications in China.

15 Made to our exact specifications in China. © 2008 Taylor Precision Products and its affiliated companies, all rightsreserved. Taylor® and Leading the Way in Accuracy® are registeredtrademarks of Taylor Precision Products and its affiliated companies.WeatherGuide™ is a trademark of Taylor Precisio...