Page 2 - Table of contents
2 Table of contents Safety precautions.............................................................................................. 3 Important notes for users ................................................................................... 3 Displays and keys ......................................
Page 3 - Safety precautions; • Do not use this unit on slippery surfaces.; Important notes for users; Off button
3 Safety precautions • Do not use this unit on slippery surfaces. • Do not step on the platform when wet. Important notes for users Recorded data may be lost if the unit is used incorrectly or is exposed toelectrical power surges. TANITA assumes no responsibility for any kind of lossof recorded data...
Page 4 - Inserting/Replacing the batteries; The battery box is located on the back of the measuring platform.; Weight Mode Switch; • Do not attempt to disassemble the unit.; KG LB
4 Inserting/Replacing the batteries The battery box is located on the back of the measuring platform. Two 3-volt CR2032 replaceable lithium batteries Lithium batteries can typically be used for many years before replacement is necessary. When the low battery sign, “LO” appears on the LCD, pleaserepl...
Page 5 - Product Features; How the Scale Determines Your Auto Goal Weight
5 Product Features How the Scale Determines Your Auto Goal Weight During the programming process, you will enter your height. Once your height is entered, the scale automatically suggests your ideal goal weight correspondingto a Body Mass Index (BMI). According to National Institutes of Health, the ...
Page 6 - Setting (resetting) personal data in memory; Select a personal key number; Make sure that the scale is placed on a flat, even floor.; Select “Auto Goal Weight” or “Input Goal Weight”
6 Setting (resetting) personal data in memory The unit can be operated only if data has been programmed into one of thepersonal data memories. Place your scale on a flat, even floor. You will need to measure yourcurrent weight during this process. 1. Turn on the power Press SET button to turn on the...
Page 7 - process. No data will be saved as a result.; Classic and Weightless Mode; Classic Mode
7 NOTE: • Thirty seconds or more of inactivity will cause automatic shut off during this process. No data will be saved as a result. • If you make a mistake or wish to turn the unit off before you complete the programming, press and hold the “1/OFF” button for three seconds or moreto turn the unit o...
Page 8 - User number
8 Instructions for useClassic and Weightless Mode NOTE: • Please set your personal data before operating the scale. • If you wish to turn the unit off before automatic shut off, press the “1/OFF” button for three seconds or more. 1. Select personal key and step on scale Press personal key and the di...
Page 9 - Reward Icon – Each completion of one step.; Weight Only Mode; Tap on the center of platform
9 Reward Icon – Each completion of one step. NOTE: • If you remain on the platform after your weight is displayed, the power shuts off automatically in about 20 seconds. • If you step off the platform after your weight is displayed, the power shuts off automatically in about 20 seconds. Weight Only ...
Page 10 - Troubleshooting; “Err” appears on the display; You stepped on the scale before “0.0” appeared on the display.; “LO” appears on the display
10 Troubleshooting “Err” appears on the display You stepped on the scale before “0.0” appeared on the display. Wait until “0.0” appears, then step on the scale. “- EE -” appears on the display Reading cannot be obtained if the weight capacity is exceeded. “- - - -” appears on the display If it is du...
Page 12 - For technical questions about this product,
Tanita Corporation 14-2, 1-Chome, Maeno-ChoItabashi-Ku, Tokyo, Japan 174-8630Tel: +81(0)-3-3968-2123Fax: +81(0)-3-3967-3766www.tanita.co.jpISO 9001 Certified Tanita Corporation of America 2625 South Clearbrook DriveArlington Heights, IL 60005 USATel: +1-847-640-9241Fax: +1-847-640-9261www.tanita.com...