Page 3 - List of Contents; details the external connectors and provides important safety; E57xx series of Encoder models.
Preliminary Pages Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page iii ST.TM.E10076.3 List of Contents Chapter 1: Introduction to the Basic Encoder Gives a general description of the equipment and its main features and functions. Identifies the controls, indicators and con...
Page 4 - About this Manual; Nomenclature
Preliminary Pages Page iv Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 About this Manual This manual provides instructions and information for the installation, operation of the Encoder.This manual should be kept in a safe place for reference for the life of ...
Page 5 - Acknowledgements; General
Preliminary Pages Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page v ST.TM.E10076.3 Acknowledgements General All best endeavours have been made to acknowledge registered trademarks and trademarks used throughout this manual. Any notified omissions will be rectified in the ...
Page 6 - Warnings, Cautions and Notes; Heed Warnings; All operating and use instructions should be followed.; Retain Instructions; EMC Compliance; supplied or if in doubt contact Customer Services.
Preliminary Pages Page vi Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Warnings, Cautions and Notes Heed Warnings All warnings on the product and in the operating instructions should be adhered to. The manufacturer can not be held responsible for injuries or ...
Page 7 - Contact Information; TANDBERG Television Customer Services; Support Services; For stand-alone equipment, then TANDBERG Television BASIC; Where to Find Us
Preliminary Pages Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page vii ST.TM.E10076.3 Contact Information TANDBERG Television Customer Services Support Services Our primary objective is to provide first class customer care that is tailored to your specific business and ope...
Page 8 - Technical Training; Training Courses; Customer Services and Technical Training Postal Address
Preliminary Pages Page viii Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Technical Training Training Courses TANDBERG Television provides a wide range of training courses on the operation and maintenance of our products and on their supporting technologies. T...
Page 9 - Chapter 1; Introduction to the Basic Encoder; Contents
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 1-1 ST.TM.E10076.3 Chapter 1 1. Introduction to the Basic Encoder Contents 1.1 Scope of this Manual................................................. 1-3 1.1.1 Who Should Use This Manual ...................... 1-31.1.2 Build ...
Page 10 - List of Figures
Introduction to the Basic Encoder Page 1-2 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 1U Chassis .................................................. 1-182U Chassis .................................................. 1-18 1.4.5 Boards in the Basic Encoder .......
Page 11 - Scope of this Manual; Who Should Use This Manual; Build Menu; What Equipment is Covered by This Manual; Equipment Models
Introduction to the Basic Encoder Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 1-3 ST.TM.E10076.3 1.1 Scope of this Manual 1.1.1 Who Should Use This Manual This manual is written for operators/users of the 1U and 2U Voyager Encoders to assist in the installation, opera...
Page 13 - Information Label; the possible positions of each option module.; Build Revision; is NOT the same as the Build version, which relates to software and; Role of the Encoder in a System; Typical System; MPEG-2 and DVB or ATSC compliant and has high performance for the
Introduction to the Basic Encoder Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 1-5 ST.TM.E10076.3 Information Label There are two information labels which identify the configuration of the unit. Figure 1.3 and Figure 1.4 are typical examples. Figure 1.3: Information La...
Page 14 - DSNG Systems; Overview; Figure 1.5: Typical DSNG Encoder Configuration
Introduction to the Basic Encoder Page 1-6 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 The E5714 and E5740 contain the same high performance encoder. The E5714 is a 1U chassis housing the encoder and a QPSK satellite modulator. The E5740 is a 2U chassis hous...
Page 15 - IF Output. The IF frequency can be tuned between 50 MHz and 90 MHz.; DENG Systems; Figure 1.6: Typical DENG System Configuration
Introduction to the Basic Encoder Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 1-7 ST.TM.E10076.3 E5714 The satellite modulator within the E5714 supports QPSK modulation in accordance with EN 300 421 (DVB-S). It provides a main and monitoring IF Output. The IF frequenc...
Page 16 - Summary of Features; Video Encoding; Video Encoding Modes
Introduction to the Basic Encoder Page 1-8 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 1.3 Summary of Features 1.3.1 Video Encoding MPEG-2 Encoding The Encoder processes a broadcast-standard video signal into a compressed encoded bit-stream in accordance wit...
Page 17 - Motion Estimation; Coding Resolutions
Introduction to the Basic Encoder Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 1-9 ST.TM.E10076.3 · Fully exhaustive motion estimation · An internal frame synchroniser (see Internal Frame Synchroniser on Page 1-10) · Support for Active Format Descriptor (AFD) (see Chap...
Page 18 - Internal Frame Synchroniser; Audio Encoding
Introduction to the Basic Encoder Page 1-10 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 1.4: Video Coding Resolutions 625 Line Modes 525 Line Modes 720 pixels x 576 lines 720 pixels x 480 lines 704 pixels x 576 lines 704 pixels x 480 lines 640 pixels x...
Page 19 - Audio Inputs; Dual mono: the left and right signals are encoded and carried in the
Introduction to the Basic Encoder Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 1-11 ST.TM.E10076.3 Audio Inputs The standard audio input is: · AUDIO IN – 15-way male D-type - software selectable balanced analogue or digital AES/EBU, with AES/EBU on left only. A break-o...
Page 20 - Test Tones; purposes. Refer to Annex B, Technical Specification for level and; Audio Variable Bit-rate; as long as a suitably high bit-rate is selected.
Introduction to the Basic Encoder Page 1-12 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Test Tones The equipment can be configured to generate a test tone for alignment purposes. Refer to Annex B, Technical Specification for level and frequency. Audio Variab...
Page 21 - Vertical Blanking Interval (VBI) Line Processing; Introduction; The Encoder has three modes for processing VBI lines.; VBI in Picture; extra bit-rate, depending on the amount and complexity of the VBI
Introduction to the Basic Encoder Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 1-13 ST.TM.E10076.3 Table 1.6: Dolby Digital Audio Encoding Bit-rates Bit-rate(kbit/s) Single ChannelMono (1/0) Dual ChannelStereo (2/0) 56 3 - 64 3 - 80 3 - 96 3 3 112 3 3 128 3 3 160 3 3 1...
Page 22 - VBI User Data; Data Channels
Introduction to the Basic Encoder Page 1-14 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 VBI User Data Closed Caption data, together with other formats such as VITC and AFD, can be transmitted in the user data field of the video or relevant part of the video ...
Page 23 - Outputs
Introduction to the Basic Encoder Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 1-15 ST.TM.E10076.3 1.3.5 Outputs Three ASI-C (copper) outputs supplying a DVB and ATSC 18 MPEG-2 transport stream are supplied as standard. 1.3.6 IF Modulation E5714 The internal satellite ...
Page 24 - Guided Tour; Enclosure; used as a stand-alone unit. All inputs and outputs are via rear panel; The User Interface; U Encoder provides a keypad and softkeys to access and input data.; Figure 1.7: 1U Encoder Front Panel Indicators
Introduction to the Basic Encoder Page 1-16 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 1.4 Guided Tour 1.4.1 Enclosure There are two sizes of enclosure, 1U and 2U versions. The enclosure is used as a stand-alone unit. All inputs and outputs are via rear pan...
Page 25 - Power Supply Stand-by Switch; The use of this switch puts the Encoder into stand-by mode. It powers; Figure 1.9: 2U Encoder Front Panel Indicators; Rear Panel Description
Introduction to the Basic Encoder Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 1-17 ST.TM.E10076.3 Power Supply Stand-by Switch The use of this switch puts the Encoder into stand-by mode. It powers down the supply rails of the display and internal circuits within the u...
Page 26 - U Chassis
Introduction to the Basic Encoder Page 1-18 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 1U Chassis Figure 1.10: E5714 (1U) Rear Panel Component Parts and Connectors Figure 1.11: E5715 (1U) Rear Panel Component Parts and Connectors 2U Chassis Figure 1.12: E57...
Page 27 - Boards in the Basic Encoder; slots (see Equipment Models on page 1-3 and Chapter 3, Options and; normal operation and may invalidate the warranty.
Introduction to the Basic Encoder Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 1-19 ST.TM.E10076.3 Figure 1.13: E5750 (2U) Rear Panel Component Parts and Connectors 1.4.5 Boards in the Basic Encoder The basic Encoder contains two boards mounted horizontally in the encl...
Page 28 - BLANK
Introduction to the Basic Encoder Page 1-20 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 BLANK
Page 29 - Chapter 2; Installing the Equipment
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 2-1 ST.TM.E10076.3 Chapter 2 2. Installing the Equipment Contents 2.1 Introduction ............................................................... 2-3 2.1.1 Read This First! ............................................ 2-32....
Page 31 - Power Supplies; EMC Compliance Statements
Installing the Equipment Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 2-3 ST.TM.E10076.3 2.1 Introduction 2.1.1 Read This First! The Encoder must be handled carefully and thoughtfully to prevent safety hazards and damage. It is usually supplied as part of a system inst...
Page 32 - FCC; Preliminary Checks; Mechanical Inspection; Moving the Equipment Safely; Do not place this product on an unstable cart, stand,; Fixing Method
Installing the Equipment Page 2-4 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 FCC This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reas...
Page 33 - Figure 2.1: Fitting the Encoder into a Rack; Cable Routing; rear of the unit and the connectors.; Ventilation
Installing the Equipment Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 2-5 ST.TM.E10076.3 Figure 2.1: Fitting the Encoder into a Rack 2.3.2 Cable Routing Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or ...
Page 34 - equipment may need to be forced-air cooled to reduce the operating
Installing the Equipment Page 2-6 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 The unit is designed for stationary or fixed use only. Ensure it is firmly and safely located and has an adequate through-flow of air. Allow at least 50 mm free air-space at each s...
Page 35 - AC Mains Operating Voltage and Earthing; AC Power Supply; Power Cable and Earthing; Encoder is to be used.; Protective Earth/Technical Earth
Installing the Equipment Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 2-7 ST.TM.E10076.3 2.4 AC Mains Operating Voltage and Earthing 2.4.1 AC Power Supply CAUTION... This product should be operated only from the type of power source indicated on the marking label. If y...
Page 36 - Connecting the Encoder to the AC Power Supply; DC Operating Voltage and Earthing; DC Power Supply
Installing the Equipment Page 2-8 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 The unit has a Technical earth terminal (marked with ) located at the rear panel. Its use is recommended. This is NOT a Protective earth for electric shock protection. The terminal...
Page 37 - DC Power Cable and Earthing
Installing the Equipment Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 2-9 ST.TM.E10076.3 The internal dc power supply module used in this equipment is designed for use on dc supplies ranging from 12 to 36 volts dc. (see Annex B, Technical Specification for a full power...
Page 38 - Table 2.2: DC Input Connector and Cable details; Signal Connections For the Basic Unit
Installing the Equipment Page 2-10 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 WARNING … THE POWER-SUPPLY CABLE SHOULD BE ROUTED SO THAT IT IS NOT LIKELY TO BE DAMAGED OR TRAPPED BY ITEMS PLACED UPON OR AGAINST IT, PAYING PARTICULAR ATTENTION TO THE CABLE AT...
Page 40 - Connecting Up the Basic Encoder; ready to be connected up to the rest of the system equipment
Installing the Equipment Page 2-12 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Figure 2.7: E5750 (2U) Rear Panel Component Parts and Connectors 2.6.2 Connecting Up the Basic Encoder Once the unit has been installed in its intended operating position, it is r...
Page 41 - Power Supply; SDI IN; Equipment Locally, Video Input Option for the types of; H SYNC
Installing the Equipment Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 2-13 ST.TM.E10076.3 Do not move or install equipment whilst it is still attached to the mains supply. Ensure ESD precautions are observed whilst interconnecting equipment. NOTE…See Chapter 3 for info...
Page 42 - COMP VIDEO; Operating the Equipment Locally, Video Input Option
Installing the Equipment Page 2-14 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 2.4: H SYNC Connector Pin Signal Centre Video Input Screen Ground Impedance 75 W COMP VIDEO A 75 W BNC connector provides a high quality analogue video input to the unit. Se...
Page 43 - ASI OUT 1, 2 and 3 Outputs; Connect the Multiplexer or Modulator ASI cable to the; Control Interfaces; Connection; via the Ethernet network running the Simple Network Management; Protocol (SNMP) protocol. Connect the ETHERNET connector to the; Locally for details of how to access the front panel menus.
Installing the Equipment Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 2-15 ST.TM.E10076.3 Table 2.6: Audio In Connector Pin Signal Pin Signal Analogue Digital Analogue Digital 1 Left Channel A (+) AES/EBU (A) (+) 9 Left Channel A (-) AES/EBU (A) (-) 2 Not connected 10 ...
Page 45 - Remote Control; connector is wired as a DTE.; Data; RS-232 data is available on the Base Board
Installing the Equipment Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 2-17 ST.TM.E10076.3 Remote Control A 9-way, D-type male connector provides an RS-232/RS-485 port for remote control of the Encoder (see Serial Protocol Option). This connector is wired as a DTE. Tabl...
Page 46 - communications data input interface.
Installing the Equipment Page 2-18 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 NOTES…1. Signal names are with respect to a DTE in accordance with the RS-232 specification. 2. Remote pin numbers only apply to a 9-way D-type connector. 3. 25-way connectors hav...
Page 47 - BNC socket provides an IF output.
Installing the Equipment Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 2-19 ST.TM.E10076.3 2.6.10 Satellite Modulator IF Output (E5714 and E5740 IF) IF Out (Main) 75 W BNC socket provides an IF output. Table 2.13: IF Out Connector (Main) Item Specification Connector typ...
Page 48 - IF Out 1
Installing the Equipment Page 2-20 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 L-Band Out (Main) 50 W SMA female connector provides the main L-band output. This can also provide +24 V dc at up to 500 mA to power an up-converter. Table 2.16: L-band Out (Main)...
Page 49 - IF Out 2; Before Powering Up
Installing the Equipment Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 2-21 ST.TM.E10076.3 IF Out 2 A 75 W BNC socket provides a 70 MHz IF output used for monitoring. Table 2.18: IF Out 2 Connector Item Specification Connector Type BNC 75 W Female Type Analogue Connecto...
Page 50 - Setting the Encoder IP Address; Methods of Changing the Encoder IP Address; Address softkey in the; Remote Control Menu; keypad and then press the Enter softkey.; Via Telnet; Press Enter for the user name, and press Enter for the password.; The; Enter the new value and press Enter.
Installing the Equipment Page 2-22 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 2.8 Setting the Encoder IP Address 2.8.1 Methods of Changing the Encoder IP Address If, for any reason, the IP address has to be changed, this can be achieved via the front panel ...
Page 51 - Chapter 3; Options and Upgrades
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-1 ST.TM.E10076.3 Chapter 3 3. Options and Upgrades Contents 3.1 What’s Available........................................................ 3-3 3.1.1 Option Functions........................................... 3-33.1.2 Limita...
Page 52 - List of Tables
Options and Upgrades Page 3-2 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 3.10 16QAM Demodulator (M2/EOM2/SATDEMOD) ...... 3-24 3.10.1 Overview ..................................................... 3-243.10.2 Assembly............................................
Page 53 - What’s Available; Option Functions; rear panel connector space (except the M2/EDCOM2/BISS which has no
Options and Upgrades Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-3 ST.TM.E10076.3 3.1 What’s Available 3.1.1 Option Functions The basic Encoder functionality can be enhanced with the inclusion of options, hardware and software.Each hardware option module consists of...
Page 54 - Limitations on Number of Option Modules (2U Only); option modules (any combination of additional audio and data).; Limitations on Use of Option Modules; present in the Encoder, only one may be used at a time.; How to See Which Options are Fitted/Enabled
Options and Upgrades Page 3-4 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 3.2: Software Options Marketing Code Name Usedin 1U Usedin 2U M2/ESO2/NR Noise Reduction 4 4 M2/ESO2/PU Performance Upgrade/Bit-rate <1.5 Mbit/s 4 4 M2/ESO2/VBR VBR Licence 4 ...
Page 55 - Bit-rate Limits With Reflex Licence and/or; Table 3.3: Minimum Bit-rates With and Without Performance Upgrade; Basic Interoperable Scrambling System - BISS; With the appropriate configuration, the Encoder can use the Basic
Options and Upgrades Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-5 ST.TM.E10076.3 3.2 Bit-rate Limits With Reflex Licence and/or Performance Upgrade A user with a REFLEX licence (M2/ESO2/VBR) but no Performance Upgrade (M2/ESO2/PU) will be able to get lower bit-rate...
Page 56 - BISS scrambling (when fitted) is enabled and controlled via the; Additional Audio and Linear PCM Option; Audio
Options and Upgrades Page 3-6 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 BISS scrambling (when fitted) is enabled and controlled via the Setup/Mux Menu (see Chapter 4, Operating the Equipment Locally, Section 4.12.12). 3.4 Additional Audio and Linear PCM Op...
Page 57 - Assembly; Rear Panel; S11976. See Table 3.1 for the slots that it can be installed in.; Audio In Connector; Connect the audio cable to the AUDIO IN; is used in different ways according to the audio
Options and Upgrades Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-7 ST.TM.E10076.3 3.4.2 Assembly Rear Panel NOTE…The AES/EBU reference signal is provided for backwards compatibility only. When using E57xx Encoders use the reference signal provided by the Base Board....
Page 59 - The RS-232 and RS-422 Data Input option module comes with an RS-422; The RS-232 and RS-422 Data Input option module comprises Assembly
Options and Upgrades Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-9 ST.TM.E10076.3 3.5 RS-232 and RS-422 Data Input Option (M2/EOM2/DAT) 3.5.1 Overview NOTE…The Data Input Option does not report errors back to the host, thus no alarms are raised by the Encoder. The R...
Page 60 - Async Connector; Sync Connector
Options and Upgrades Page 3-10 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Async Connector A 9-way, D-type female connector provides an RS-232 asynchronous, serial communications data input interface. Table 3.5: RS-232 Data Connector (Option Module) - Asynch...
Page 62 - interface see Annex B, Technical Specification; See Table 3.1 for the slots that it can be installed in.
Options and Upgrades Page 3-12 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 3.6 Remux Option (M2/EOM2/REMUX) 3.6.1 Overview NOTE…The M2/EOM2/REMUX Remux Option Module is supported by Build version 2.2.0 and later. The Remux option module is capable of accepti...
Page 63 - DVB ASI IN 1, 2 and 3 Connectors; BNC connector provides an input to the unit.; DVB ASI OUT 1 Connector; BNC connector provides an output from the unit.; Stages of Remultiplexing; system using one stage of remultiplexing.
Options and Upgrades Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-13 ST.TM.E10076.3 DVB ASI IN 1, 2 and 3 Connectors A 75 W BNC connector provides an input to the unit. Table 3.7: DVB ASI In Connector Pin Signal Centre Signal Screen Ground NOTE…When connecting the in...
Page 64 - Figure 3.4: Block Diagram – One Stage of Remultiplexing
Options and Upgrades Page 3-14 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Figure 3.4: Block Diagram – One Stage of Remultiplexing Similarly, if two stages of remultiplexing are introduced, thirteen Encoders can be combined, providing up to thirteen services...
Page 65 - Function of Remultiplexer; service, it is the new service’s Service ID or Program Number, PIDs, or
Options and Upgrades Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-15 ST.TM.E10076.3 3.6.4 Function of Remultiplexer It is the function of the Remultiplexer to combine the locally generated host services with the externally supplied input services, connected via ASI i...
Page 66 - Using the Remultiplexer; ATSC Remultiplexing
Options and Upgrades Page 3-16 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 3.6.5 Using the Remultiplexer Set the output bit-rate to the required value in the Setup/Mux Menu . Connect transport streams that are to be combined (remultiplexed) with the host Enc...
Page 67 - remultiplexing unit, (this can be found in the; What to do if Overflow Occurs; ‘Off’ or remove the ASI input), or reduce the bit-rate of the incoming
Options and Upgrades Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-17 ST.TM.E10076.3 The easiest way to configure the bit-rates to avoid overflow, is as follows:1. Divide the 188 byte output bit-rate of the primary (master) remultiplexing unit, (this can be found in t...
Page 68 - Operating the Equipment Locally.; Audio Inputs Receiver
Options and Upgrades Page 3-18 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 3.7 XLR Expander Card Option (M2/EOM2/XLR) 3.7.1 Overview NOTE…The M2/EOM2/XLR XLR Expander Card Option is supported by Build version 3.0 and later. The XLR Expander Card Option permi...
Page 70 - Audio Out Connector; Two XLR male connectors provide a stereo
Options and Upgrades Page 3-20 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 NOTES…1. When the Encoder is powered down the digital channel is selected with 110 W termination. 2. The digital audio input does not support SPDIF. Audio Out Connector Two XLR male c...
Page 71 - capable of decoding 422P@ML and MP@ML. It can provide analogue or; female BNC connector provides an ASI; SDI Video Out; female BNC connector provides an SDI video
Options and Upgrades Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-21 ST.TM.E10076.3 3.8 SD Decoder Option (M2/EOM2/DEC) 3.8.1 Overview NOTES…1. The M2/EOM2/DEC SD Decoder Option is supported by Build version 3.1 and later. 2. This option module only fits into option ...
Page 72 - Composite Video Output; female BNC connector provides a composite; Audio Output
Options and Upgrades Page 3-22 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Composite Video Output A 75 W female BNC connector provides a composite video output. See Annex B, Technical Specification for a list of supported video standards. Table 3.15: Composi...
Page 73 - range of 50 MHz to 180 MHz, and –20 dBm to –40 dBm input power, and
Options and Upgrades Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-23 ST.TM.E10076.3 RS-232/RS-422 Data Output A 9-way D-type socket provides the data outputs. Table 3.17: RS232/RS422 Data Output Connector Item Specification Connector Type 9-way D-type Socket Connecto...
Page 74 - female BNC connector provides an IF Input.; RF In; F-type female connectors provide; decode signals with symbol rates in the range 1 to 45 Msymbol/s. It is
Options and Upgrades Page 3-24 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 3.9.2 Assembly Rear Panel W IF In A 75 W female BNC connector provides an IF Input. Table 3.18: IF In Connector Item Specification Connector Type 75 W BNC Female Connector designation...
Page 75 - the transport stream generated by the Encoder can be output in UDP
Options and Upgrades Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-25 ST.TM.E10076.3 3.10.2 Assembly Rear Panel L-Band Inputs Two 75 W F-type female connectors provide L-band inputs. Table 3.20: L-Band Input Connector Item Specification Connector Type 75 W F-type Fema...
Page 76 - Between one and seven MPEG-2 transport stream packets can be put in; female BNC connector provides an ASI input.; A 3.5mm socket provides a debug interface.
Options and Upgrades Page 3-26 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Between one and seven MPEG-2 transport stream packets can be put in each UDP packet. The data link layer is Ethernet according to IEEE 802.3/802.3u (auto-sensing 10/100 Mbit/s, twiste...
Page 77 - ASI Out; female BNC connector provides an ASI output.; Ethernet Output; Software Options; mode. Contact Customer Services for details.
Options and Upgrades Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-27 ST.TM.E10076.3 ASI Out A 75 W female BNC connector provides an ASI output. NOTE…This connector is not used. Table 3.22: ASI Out Connector Item Specification Connector Type 75 W BNC Female Connector ...
Page 79 - Chapter 4; Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-1 ST.TM.E10076.3 Chapter 4 4. Operating the Equipment Locally Contents 4.1 Introduction ............................................................... 4-9 4.2 Establishing Local Control (1U)..................................
Page 87 - hierarchy and menu items in detail.; any option modules is approximately 45 seconds). A typical; The menu items on the display are selected and amended by one of the; Default Service
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-9 ST.TM.E10076.3 4.1 Introduction The front panel display and keypad are used to configure, control and monitor the Encoder. The control interface is a structured menu which gives access to ...
Page 88 - Figure 4.2: 1U Navigation Keys and Buttons; Summary Screen; For Text or Numeric Entry on page 4-11). Press ENTER to confirm or
Operating the Equipment Locally Page 4-10 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Figure 4.2: 1U Navigation Keys and Buttons NOTE… The navigation keys are referred to as LEFT, RIGHT, UP and DOWN, indicating the direction of the arrows. From the Summary S...
Page 89 - For Multiple Choice Entry; Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-11 ST.TM.E10076.3 For Multiple Choice Entry · DOWN Scrolls down to next option · UP Scrolls up to previous option · RIGHT No action · LEFT No action · ENTER Accepts new setting · CANCEL Leav...
Page 90 - Input Monitor; At power-on the Encoder runs through a boot sequence (boot time with; Pressing the More softkey displays the
Operating the Equipment Locally Page 4-12 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 4.4 Establishing Local Control (2U) 4.4.1 Input Monitor At power-on the Encoder runs through a boot sequence (boot time with Remux option module is approximately 90 seconds...
Page 91 - Moving Through the Menu Screens
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-13 ST.TM.E10076.3 4.4.3 A(udio)/V(ideo) Menu (2U) The A/V Menu contains some basic video and audio options. They can all be changed with the exception of the audio input levels. These are on...
Page 92 - Figure 4.6: 2U Keypad and Display Functions; How to Use the Keypad; Figure 4.7 gives details of how to access the inscriptions.
Operating the Equipment Locally Page 4-14 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Figure 4.6: 2U Keypad and Display Functions 4.5.2 How to Use the Keypad Each key on the keypad has more than one inscription. One press of a key makes the number appear on ...
Page 93 - How to Use the Functions Associated with Softkeys; Display Screens; The display screens shown in Section 4.5.3, How to Use the Functions; Menu Formats
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-15 ST.TM.E10076.3 4.5.3 How to Use the Functions Associated with Softkeys The following display screens show the different functions associated with the options. NOTE… A black diagonal cross...
Page 94 - Figure 4.8: Menu Hierarchy – Summary Screen and Advanced Menus
Operating the Equipment Locally Page 4-16 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Config Menu Front Panel Diagnostics Menu LCD DisplayKeyboardFail RelayAlarm RelayAlarm LEDBuzzerQuit Setup Menu System.... See Figure 4.9Video.... See Figure 4.10Audio.... ...
Page 95 - Summary Screen and Advanced Menus; Setup Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-17 ST.TM.E10076.3 4.5.6 Summary Screen and Advanced Menus See Figure 4.8, for the top-level menu hierarchy. Press the More softkey in the Summary Screen to access the Advanced Menu . The Adv...
Page 97 - Short Channel Name softkey in the; Long Channel Name Option; Long Channel Name softkey in the; Syntax Option; SI Level Option; Enter softkey after selecting one of them.
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-19 ST.TM.E10076.3 4.7.2 Service Info Menu (Syntax = ATSC 1 ) Overview The Service Info Menu is selected from the System Menu by pressing the Service Info softkey. This menu provides options ...
Page 98 - Program Number Option; Service Info Menu; Service Info Menu; PMT PID Option; Service Info Menu
Operating the Equipment Locally Page 4-20 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.3: SI Level Options Selected Option Description PAT/PMT/CAT only Program Association Table/ Program Map Table/ ConditionalAccess Table. PAT/PMT only Program Associa...
Page 99 - DST Start Date softkey in the
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-21 ST.TM.E10076.3 DST Start Date Option (3.0 and later) To access the DST Start Date (Daylight Saving Time) option, press the DST Start Date softkey in the Service Info Menu . This option al...
Page 100 - Network Id Option; Service Id Option
Operating the Equipment Locally Page 4-22 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.5: SI Level Options Selected Option Description PAT/PMT/CAT only Program Association Table/ ProgramMap Table/ Conditional Access Table. PAT/PMT only Program Associa...
Page 101 - Transport Stream Id Option; Id softkey in the; Service; Descriptor softkey in the
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-23 ST.TM.E10076.3 Transport Stream Id Option To access the Transport Stream Id option, press the Transport Stream Id softkey in the Service Info Menu . This enables the Transport Stream Iden...
Page 104 - General Menu
Operating the Equipment Locally Page 4-26 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.13: SABus Baud Rate Options Selected Option Description Selected Option Description 1200 1200 Baud rate. 9600 9600 Baud rate. 2400 2400 Baud rate. 19200 19200 Baud ...
Page 105 - UTC Offset Option; Mean Time (GMT). When including SI in the output transport stream the; Temperature Option; The Temperature option is shown in the; Screen Saver Option; Keypress Beep Option; the
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-27 ST.TM.E10076.3 UTC Offset Option The Universal Time Co-ordinate (UTC) is effectively the same as Greenwich Mean Time (GMT). When including SI in the output transport stream the Encoder is...
Page 106 - Power Dip Recovery Option; Upgrade Encoder Option; Software Release Option; Fan Control Option
Operating the Equipment Locally Page 4-28 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Power Dip Recovery Option To access the Power Dip Recovery option, press the Power Dip Recovery softkey in the General Menu . Table 4.18: Power Dip Recovery Options Selecte...
Page 107 - Advanced Menu; Advanced softkey. This menu provides options for the advanced; Setup Password Option; Display Errors Option; Auto Lip Sync option is turned on (see Auto Lip Sync Option on
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-29 ST.TM.E10076.3 4.7.6 Advanced Menu Overview The Advanced Menu is selected from the System Menu by pressing the Advanced softkey. This menu provides options for the advanced parameters of ...
Page 108 - Action On PID Error Option; SNMP Control Option; Display Contrast Option; Reset On Download Option
Operating the Equipment Locally Page 4-30 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Action On PID Error Option To access the Action on PID Error option, press the Action on PID Error softkey in the Advanced Menu . Table 4.21: Action on PID Error Options Se...
Page 109 - Video Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-31 ST.TM.E10076.3 CAUTION… The Reset Encoder option is not normally used. One example of its use is when code has been downloaded in background mode (such as Base Board code or Video Compres...
Page 111 - Input Source Select; softkey from the; Frame Rate Option; Video
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-33 ST.TM.E10076.3 Input Source Select NOTE… This option is available in Build version 3.1.0 and later. To access the Input Source Select option, press the Input Source Select softkey from th...
Page 112 - Video Locked Option; . This is the text that is displayed if the video output is; Text Colour Option; . This gives a choice of colours for the text which is; Background Colour Option; Video Bandwidth Option
Operating the Equipment Locally Page 4-34 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.25: Frame Rate Options Selected Option Description 29.97 Hz Used in 525 lines (NTSC-M + PAL-M). 25 Hz Used in 625 lines (PAL). Video Locked Option This option indic...
Page 113 - OP Video Loss Option; Input Termination Option; Reduction and Compression for more information.
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-35 ST.TM.E10076.3 To access the Video Bandwidth option, press the Video Bandwidth softkey from the Video Source Menu . Table 4.28: Video Bandwidth Options Selected Option Description Sharp F...
Page 114 - Default 625 Config and Default 525 Config; Logo Option (When Logo Downloaded into Unit); Time Code Option; Video Encoder Menu; Video Encoder softkey. This menu permits the selection of video
Operating the Equipment Locally Page 4-36 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.30: Noise Reduction Options Selected Option Description Off Level 1 Use noise reduction, if necessary, but don't 'damage' the picture in any way. Level 2 Medium set...
Page 115 - Compression Mode Option; To access the Compression Mode option, press the Compression Mode; softkey in the
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-37 ST.TM.E10076.3 Table 4.31: Profile/Level Options Selected Option Description MP@ML Main Profile @ Main Level. Typically used in 4:2:0 direct to home. 422P@ML 4:2:2 Profile @ Main Level. T...
Page 116 - . Actual minimum and maximum; . Actual minimum and maximum depend on the video standard; To access the Bit-rate option, press the Bit-rate softkey in the; VBR Mode Option
Operating the Equipment Locally Page 4-38 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.33: Seamless Mode Bit-rate (Full Resolution Only) Profile Seamless 1 (Mbit/s) Seamless 2 (Mbit/s) Seamless 3 (Mbit/s) Seamless 4 (Mbit/s) Seamless 5 (Mbit/s) Seamle...
Page 118 - When running in VBR Mode the two top-level status screens show the; Delay Option; Resolution option, press the Resolution softkey in the
Operating the Equipment Locally Page 4-40 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 The required picture quality is set in the same menu by the VBR Target Quality item. When running in VBR Mode the two top-level status screens show the current bit-rate bei...
Page 119 - Aspect Ratio Option; . This option does not affect the image processing.; AFD Option; press the AFD softkey in the
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-41 ST.TM.E10076.3 Table 4.34: Resolution Options Selected Option Description 625 Line Modes 525 Line Modes Auto (720x576) Auto (720x480) 720 x576 720 x480 704 x576 704x480 640 x576 640x480 5...
Page 120 - GOP Structure Option; To access the Group of Pictures (GOP) Structure option, press the GOP
Operating the Equipment Locally Page 4-42 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.37: AFD Information VideoInput EncoderVideo IndexExtraction Encoder AFD off Encoder AFD on Encoder AFD on (No actionon Error) Sequence_headeraspect_ratio_informatio...
Page 121 - GOP Length Option; Length softkey in the
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-43 ST.TM.E10076.3 GOP Length Option To access the Group of Pictures (GOP) Length option, press the GOP Length softkey in the Video Encoder Menu . This enables the video GOP structure length ...
Page 122 - Concatenation Option; Concatenation Without Helper Signals.
Operating the Equipment Locally Page 4-44 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 With frame pictures a frame of a field 1 and field 2 is encoded as a single unit. With field pictures each individual field of video is encoded as a single unit, but must b...
Page 124 - Teletext Data Out Option; VBI on PID Option; PID softkey. The option is used for entering or updating the VBI PID.
Operating the Equipment Locally Page 4-46 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 4.8.4 Vertical Blanking Interval (VBI) Menu Overview The VBI Menu is selected from the Video Menu by pressing the VBI softkey. This menu permits the selection of VBI parame...
Page 125 - VBI In Picture Option; VBI Menu; VBI Men
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-47 ST.TM.E10076.3 VBI In Picture Option NOTES… 1. The VBI in Picture option is only accessible if the selected video profile/level is 422P@ML 6 . 2. VBI in Picture transmits the VBI waveform...
Page 126 - Closed Caption Option; Auto Detect VITC Option
Operating the Equipment Locally Page 4-48 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 WSS (Line 23) Option NOTES… 1. This option is only available when Frame Rate is 25 Hz. 2. Aspect ratio will change when WSS is enabled. To access the WSS (Line 23) option, ...
Page 127 - Switching back to DVB would invoke the original PIDs.
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-49 ST.TM.E10076.3 Table 4.43: VBI - Line ‘n’ Options Option Description Frame Rate = 29.97 Hz Off VBI data is not extracted from the line. Vertical Interval Time Code VITC data extracted fro...
Page 130 - Audio Menu
Operating the Equipment Locally Page 4-52 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 4.9 Audio Menu 4.9.1 Overview The Audio Menu is selected from the Setup Menu by pressing the Audio softkey. This menu permits the selection of audio parameters. Any option ...
Page 132 - To access the Source option, press the Source softkey in the; Audio A; Coding Standard Option; To access the Coding Standard option, press the Coding Standard
Operating the Equipment Locally Page 4-54 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Source Option To access the Source option, press the Source softkey in the Audio A Menu . Table 4.44: Source Options Selected Option Description Off No audio packets are se...
Page 133 - Audio Bit-rate Option; Input Level L Option; status only and cannot be changed.
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-55 ST.TM.E10076.3 Audio Bit-rate Option NOTES… 1. This option is only shown when the Coding Standard is AC-3 Pass-Thru, MPEG Layer 2 or Dolby Digital (AC-3). 2. When AC-3 Pass-Thru is select...
Page 134 - Input Level R Option; Auto Lip Sync Option; Audio A Menu
Operating the Equipment Locally Page 4-56 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Input Level R Option NOTE… This option is not shown when the Coding Standard is MPEG Layer 2 (mono) or Dolby Digital (AC-3) (1/0). This option indicates the input level of ...
Page 135 - Lip Sync Offset Option; Audio Delay Option; External Delay Option
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-57 ST.TM.E10076.3 Lip Sync Offset Option NOTE… This option is only available if the Auto Lip Sync option is set to On. To access the Lip Sync Offset option, press the Lip Sync Offset softkey...
Page 136 - Clip Level Option; Impedance Option; Language or Language Left/Right Option; Left/Right softkey in the
Operating the Equipment Locally Page 4-58 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Clip Level Option To access the Clip Level option, press the Clip Level softkey in the Audio A Menu . This screen enables the audio clipping level to be set. NOTES… 1. This...
Page 137 - SMPTE 302M Standard Option; Standard softkey in the; Channel Option; Bit Stream Mode Option
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-59 ST.TM.E10076.3 SMPTE 302M Standard Option NOTES… 1. This option is only shown when the Coding Standard is Linear PCM or Dolby E Pass-Thru. 2. Problems may be experienced with some Receive...
Page 138 - Dialogue Level Option; Dolby Srnd Mode Option; To access the Dolby Srnd Mode option, press the Dolby Srnd Mode
Operating the Equipment Locally Page 4-60 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.55: Bit Stream Mode Options Selected Option Description Complete Main Music & Effects Visually impaired Hearing impaired Dialogue Commentary Emergency Voice Ove...
Page 139 - Production Info Option; Mixing Level Option; Room Type Option
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-61 ST.TM.E10076.3 Production Info Option NOTE… This option is only shown when the Coding Standard is Dolby Digital (AC-3). To access the Production Info option, press the Production Info sof...
Page 140 - Copyright Option; Original Option; Dynamic Range Option
Operating the Equipment Locally Page 4-62 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Copyright Option NOTE… This option is shown when the Coding Standard is Dolby Digital (AC-3) or MPEG Layer 2. To access the Copyright option, press the Copyright softkey in...
Page 141 - RF Protection Option; Deemphasis Option; DC Filter Option; To access the DC Filter option, press the DC Filter softkey in the
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-63 ST.TM.E10076.3 RF Protection Option NOTE… This option is only shown when the Coding Standard is Dolby Digital (AC-3). To access the RF Protection option, press the RF Protection softkey i...
Page 143 - Audio Languages Menu; Input Format Option; Output Source Option
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-65 ST.TM.E10076.3 4.9.3 Audio Languages Menu The Audio Languages Menu is selected from the Audio Menu by pressing the Audio Languages softkey. This menu permits the selection of languages us...
Page 144 - Output Format Option; FSR softkey in the; Firmware Release Option; Data Menu
Operating the Equipment Locally Page 4-66 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.65: Output Source Options Selected Option Description SDI Embedded (1-4) Any of the SDI embedded audio feeds. XLR Input (Monitor) Output the audio which is input to...
Page 145 - Encoding Option; Baud Rate Option
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-67 ST.TM.E10076.3 only shown if M2/EOM2/DAT option fitted Data Menu Data A - RS232....Data B - RS422....Data X A - RS232....Data X B - RS422.... Setup Menu Shaded options are showing status ...
Page 146 - SNMP oid index Option
Operating the Equipment Locally Page 4-68 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.68: Baud Rate Options Selected Option Description Selected Option Description 1200 1200 Baud rate. 9600 9600 Baud rate. 2400 2400 Baud rate. 19200 19200 Baud rate. ...
Page 147 - Test Mode Option
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-69 ST.TM.E10076.3 Bit-rate Option To access the Bit-rate option, press the Bit-rate softkey in the Data B - RS422 Menu . This enables the bit-rate of the RS-422 synchronous data channel to b...
Page 148 - Output Menu; Output
Operating the Equipment Locally Page 4-70 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 4.10.4 Data XA - RS232 Menu (When M2/EOM2/DAT Fitted) Overview NOTE… In the Data XA - RS232 Menu, X = the number of the option slot that the module fits into. See Section 4...
Page 150 - Descriptor Type Option; Descriptor Type = Terrestrial; Band Plan Option
Operating the Equipment Locally Page 4-72 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 4.11.2 Output Format Option To access the Output Format option, press the Output Format softkey in the Output Menu . The menus available depend upon which option cards are ...
Page 151 - Delivery; Frequency Option; Bandwidth Option; Delivery Descriptor Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-73 ST.TM.E10076.3 Table 4.72: Band Plan Options Selected Option Selected Option Australia Ireland Europe VHF South Africa Europe CATV French Overseas PIA Italy France Morocco Japan New Zeala...
Page 152 - Modulation Type Option; Hierarchy Option; Delivery Descriptor
Operating the Equipment Locally Page 4-74 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 NOTE… This option is status only unless Manual has been selected in the Band Plan option. Table 4.75: Bandwidth Options Selected Option Description 6 MHz Terrestrial transm...
Page 153 - FEC (LP) parameters provide two levels of modulation. Transmission; Guard Interval Option; Carriers Options; Other Frequency Option
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-75 ST.TM.E10076.3 If the Hierarchy option is set to Alpha=n, then the FEC (HP) and FEC (LP) parameters provide two levels of modulation. Transmission starts with the code rate for the HP lev...
Page 154 - Descriptor Type = Cable
Operating the Equipment Locally Page 4-76 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.81: Other Frequency Options Selected Option Description None No other frequency is in use. in use One or more other frequencies are in use. 4.11.6 Descriptor Type =...
Page 155 - Symbol Rate Option; Descriptor Type = Satellite; in the; Symbol Rate
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-77 ST.TM.E10076.3 Table 4.84: FEC (Inner) Options Selected Option Description No conv. coding Cable channel does not use inner FEC rate. 1/2 Cable channel uses inner FEC rate of 1/2. 2/3 Cab...
Page 156 - Orbital Position Option; West East Option; To access the West East option, press the West East softkey in the; Polarisation Option; To access the IF Output option, press the IF Output softkey in the; . This enables the IF output to be switched On
Operating the Equipment Locally Page 4-78 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Orbital Position Option To access the Orbital Position option, press the Orbital Position softkey in the Delivery Descriptor Menu . This enables the orbital position of the...
Page 157 - IF Power Option; IF Frequency Option; Satellite Modulator Menu; Modulation Option; Satellite Modulator Menu; Mod Type Option; Satellite Modulator Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-79 ST.TM.E10076.3 IF Power Option To access the IF Power option, press the IF Power softkey in the Satellite Modulator Menu . Table 4.90: IF Power Options Valid Input Range Description Min: ...
Page 158 - FEC Rate Option; To access the FEC Rate option, press the FEC Rate softkey in the; Spectrum Invert Option; Roll Off Factor Option
Operating the Equipment Locally Page 4-80 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Symbol Rate Option To access the Symbol Rate option, press the Symbol Rate softkey in the Satellite Modulator Menu . Table 4.93: Symbol Rate Options Valid Input Range Descr...
Page 159 - Tx Bandwidth Factor Option; To access the Tx Bandwidth Factor option, press the Tx Bandwidth; Tx Bandwidth Option; Preset Pwr Norm Option; To access the Preset Pwr Norm option, press the Preset Pwr Norm
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-81 ST.TM.E10076.3 Tx Bandwidth Factor Option To access the Tx Bandwidth Factor option, press the Tx Bandwidth Factor softkey in the Satellite Modulator Menu . This option is used to calculat...
Page 160 - Sat Deliv Freq Option; Sat Orb Pos Option; To access the Sat Orb Pos option, press the Sat Orb Pos softkey in the
Operating the Equipment Locally Page 4-82 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Sat Deliv Freq Option To access the Sat Deliv Freq option, press the Sat Deliv Freq softkey in the Satellite Modulator Menu. Table 4.98: Sat Deliv Freq Options Valid Input ...
Page 161 - Status Only Options for the Satellite Modulator Menu; Output Format = Satellite Modulator
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-83 ST.TM.E10076.3 Polarisation Option To access the Polarisation option, press the Polarisation softkey in the Satellite Modulator Menu . This enables the polarisation of the satellite trans...
Page 163 - OFDM
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-85 ST.TM.E10076.3 Preset Pwr Norm Option Refer to Preset Pwr Norm Option on page 4-81 for details. Upconverter Power To access the Upconverter Power option, press the Upconverter Power softk...
Page 164 - To access the Bandwidth option, press the Bandwidth softkey in the; Modulation Mode Option; To access the Modulation Mode option, press the Modulation Mode
Operating the Equipment Locally Page 4-86 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Bandwidth Option To access the Bandwidth option, press the Bandwidth softkey in the OFDM Modulator Menu . Table 4.104: Bandwidth Options Selected Option Description 6 MHz 6...
Page 165 - Transmission Option; Spectral Pol Option; OFDM Modulator Menu; Centre Frequency Option; OFDM Modulator Menu; IF Output Frequency
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-87 ST.TM.E10076.3 Transmission Option To access the Transmission option, press the Transmission softkey in the OFDM Modulator Menu . Table 4.108: Transmission Options Selected Option Descrip...
Page 167 - Multicast IP Address Option; Type of Service Option; IP Streamer Menu; Mux Menu; Mux; Mux Output, no Remux Card; Options Enabled
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-89 ST.TM.E10076.3 Multicast IP Address Option This option is not used. Time To Live Option To access the Time To Live option, press the Time To Live softkey in the IP Streamer Menu . This is...
Page 168 - Mux Output, With Remux Card; Packet Length Option; On Air Option; To access the On Air option, press the On Air softkey in the
Operating the Equipment Locally Page 4-90 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 4.12.3 Mux Output, With Remux Card To obtain an output when a Remux card is fitted, set the options in the following menus: · Host Bit-rate Option on page 4-97 · Remux Modu...
Page 171 - Clock; To access the Clock option, press the Clock softkey in the; PCR PID Option; To access the PCR PID option, press the PCR PID softkey in the
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-93 ST.TM.E10076.3 4.12.6 Bit-rate (188) and Bit-rate (204) Option NOTE… If the Packet Length option is set to 188 bytes then only the Bit-rate (188) option is displayed. If the Packet Length...
Page 172 - Scramble Option
Operating the Equipment Locally Page 4-94 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 4.12.9 FPGA Firmware This option indicates the version of the FPGA Firmware. It is for status only and cannot be changed. 4.12.10 RAS Firmware This option indicates the ver...
Page 173 - BISS Options Enabled; BISS Mode 1 uses a fixed scrambling key, known as the Session Word, to; To access the Scramble option, press the Scramble softkey in the; BISS Key Entry Option
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-95 ST.TM.E10076.3 Enter up to seven digits using the keypad, then press the Enter softkey to accept the scrambling code. If less then seven digits are entered, they are prefixed with 0’s (ze...
Page 174 - Session Word Option; BISS Mode 1: All components are scrambled by a fixed control word,; Enc Session Word Option; BISS-E Injected Id Option
Operating the Equipment Locally Page 4-96 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 To access the BISS 13 Key Entry option, press the BISS Key Entry softkey in the Mux Menu . This enables the scrambling key used in BISS Key Entry scrambling mode to be set ...
Page 175 - Remux; If the Remux option module M2/EOM2/REMUX is fitted, there is an; Addition to Mux Menu When Remux Fitted; Remux Module Menu; Remux Mode Option; To access the Remux Mode option, press the Remux Mode softkey in the; Remultiplexer for details of remux modes.
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-97 ST.TM.E10076.3 4.13 Remux 4.13.1 Introduction If the Remux option module M2/EOM2/REMUX is fitted, there is an additional item in the Mux Menu (see Figure 4.18) and a further Remux Module ...
Page 176 - The following options are status only and cannot be changed.; Output Option; To access the Output option, press the Remux Mode softkey in the
Operating the Equipment Locally Page 4-98 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 NOTE… If Intelligent mode is selected, the Action On PID Error option (see page 4-30 ) in the Setup/System/Advanced Menu must be set to Auto Correct. If Dumb mode is select...
Page 177 - Table 4.121 indicates what is shown for the various inputs.; Short Name In Option; Short Name Out Option
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-99 ST.TM.E10076.3 Table 4.120: Output Options Selected Option Description Off The service is not included in the output. On The service is included in the output, unscrambled. On (RAS) The s...
Page 178 - Name Out Option
Operating the Equipment Locally Page 4-100 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Name Out Option To access the Name Out option press the Name Out softkey in the 1.Service Menu . This option allows the service output name to be changed. Service Prov (In...
Page 180 - To access the PMT PID option, press the PMT PID softkey in the; . This shows the Program Map Table Packet Identifier.; . This shows the Program Clock Reference Packet; Video Option; To access the Video option, press the Video softkey in the
Operating the Equipment Locally Page 4-102 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 PMT PID Option NOTE… This option is status only for the Host Encoder but can be changed for incoming services. To access the PMT PID option, press the PMT PID softkey in t...
Page 181 - VBI PID Option
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-103 ST.TM.E10076.3 ECM (CA) PID Option NOTE… This option is status only for the Host Encoder but can be changed for incoming services. Available from Build version 2.2.0 and later. To access...
Page 182 - The Data (Type of Data) option is selected from the; Teletext Option; The Teletext option is selected from the
Operating the Equipment Locally Page 4-104 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.129: Audio (Type of Audio) Options Selected Option Description Min: 1 Max: 8190 (1FFEh) Step Size: 1 Data (Type of Data) Option NOTES… 1. This option is status onl...
Page 183 - IRD Mode Option; IRD; IRD TS Source Option; IRD Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-105 ST.TM.E10076.3 4.14 IRD Menu (3.1 and later) 4.14.1 Overview NOTE… This option is available in Build version 3.1.0 and later. The IRD Menu is selected from the Setup Menu by pressing the...
Page 185 - IRD Demod Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-107 ST.TM.E10076.3 4.14.4 IRD Demod Menu Frequency Option To access the Frequency option, press the Frequency softkey in the IRD Demod Menu . This value is either the L-Band frequency for th...
Page 186 - To access the Sat Input option, press the Sat Input softkey in the; . If the IRD is in tracking mode this value is tied to that set for; LNB Option; To access the LNB option, press the LNB softkey in the
Operating the Equipment Locally Page 4-108 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Polarisation Option To access the Polarisation option, press the Polarisation softkey in the IRD Demod Menu . Table 4.136: Polarisation Options Selected Option Description...
Page 188 - Status Only Options for the IRD Demod Menu; Service List Menu; IRD Video Menu; IRD Video Menu; Video Output Source Option; Source softkey in the; IRD Video Menu
Operating the Equipment Locally Page 4-110 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Status Only Options for the IRD Demod Menu The following options are for status only and cannot be changed. · LNB Fault Status · Demod Status · Part Number · Code Version ...
Page 189 - 25 Line Composite Option; Rate Buffer Mode Option; Video Default Output Option; Output softkey in the
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-111 ST.TM.E10076.3 525 Line Composite Option To access the 525 Line Composite option, press the 525 Line Composite softkey in the IRD Video Menu . Table 4.145: 525 Line Composite Options Sel...
Page 190 - EDH Enable Option; Embedded Audio Mode Option; Mode softkey in the; Embed Data ID Option; Video PID
Operating the Equipment Locally Page 4-112 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 EDH Enable Option To access the EDH Enable option, press the EDH Enable softkey in the IRD Video Menu . This allows the pass-through of Error Detection Hierarchy (EDH) to ...
Page 191 - IRD Audio 1 and Audio 2 Menus; Audio Stream; Audio Routing Option; IRD Audio Menu; Default Language Option; IRD Audio Menu; Downmix Mode Option; IRD Audio Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-113 ST.TM.E10076.3 4.14.7 IRD Audio 1 and Audio 2 Menus NOTE… The menu structures are identical for Audio Channel 1 and Audio Channel 2. Audio Stream This shows the currently selected audio ...
Page 192 - Mute State Option; Audio Output Option; Left Sys Clip Option; Right Sys Clip Option; Status Only Options for the IRD Audio Menu
Operating the Equipment Locally Page 4-114 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 4.153: Downmix Mode Options Selected Option Description Stereo Pair Dolby Pro Logic Stereo Mute State Option To access the Mute State option, press the Mute State so...
Page 193 - IRD CA Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-115 ST.TM.E10076.3 4.14.8 IRD CA Menu Overview If the IRD is operating in tracking mode, then the IRD CA menu has no options because the CA is automatically configured to match the settings ...
Page 194 - VITS Enable Option; IRD VBI Menu; CCVC Enable Option; IRD VBI Menu; VITC Enable Option; IRD VBI Menu; GCR Enable Option; IRD VBI Menu; Status Only Options for the IRD VBI Menu
Operating the Equipment Locally Page 4-116 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 4.14.9 IRD VBI Menu VITS Enable Option To access the VITS Enable option, press the VITS Enable softkey in the IRD VBI Menu . Table 4.156: VITS Enable Options Selected Opti...
Page 195 - IRD Data Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-117 ST.TM.E10076.3 4.14.10 IRD Data Menu Async Stream Option To access the Async Stream option, press the Async Stream softkey in the IRD Data Menu . This is used to select the asynchronous ...
Page 196 - Teletext Stream Option; IRD System Status Menu; Errors Menu; Status of Error Masks; Alm (Alarm) shows the error message and triggers the alarm relay
Operating the Equipment Locally Page 4-118 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Teletext Stream Option To access the Teletext Stream option, press the Teletext Stream softkey in the IRD Data Menu . This is used to select the Teletext stream to be deco...
Page 197 - Restore Defaults; Figure 4.21: Menu Hierarchy – Error Masks Menu; Diagnostics Menu; Accessing the Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-119 ST.TM.E10076.3 Restore Defaults To access the Restore Defaults option, press the Restore Defaults softkey in the Error Masks Menu . This sets alarm, fail and error messages to the factor...
Page 198 - Active Configuration
Operating the Equipment Locally Page 4-120 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 The Encoder normally holds the following configurations: · One Active Configuration (it runs the Encoder) · Sixteen User configurations (in the User FLASH) · Sixteen Backu...
Page 199 - Backup Configurations; C o n f i g s from Backup.; Factory Default Configurations; Write Protect Configs. A password is asked for. With the correct; Quick Configuration From the Summary Screen; Config Menu
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-121 ST.TM.E10076.3 4.17.5 Backup Configurations Backup FLASH stores a copy of each of the 16 user configurations when you select Store C o n f i g s in Backup, you will be asked for the pass...
Page 200 - Load Active Config Option; Load Configs From Backup Option; Load Configs from Backup softkey in the; Store Configs in Backup Option
Operating the Equipment Locally Page 4-122 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 This menu provides options for loading and storing predefined configurations and updating and restoring backup configurations. 4.17.9 Load Active Config Option To access t...
Page 201 - Factory 525 Defaults Option; Factory 525 Defaults softkey in the; Factory 625 Defaults Option; Defaults softkey in the; Config
Operating the Equipment Locally Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-123 ST.TM.E10076.3 4.17.13 Factory 525 Defaults Option This option enables the 16 user configurations to be overwritten by the factory default settings for 525 line/29.97 Hz video operation....
Page 203 - Chapter 5; Web Browser Interface
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 5-1 ST.TM.E10076.3 Chapter 5 5. Web Browser Interface Contents 5.1 Introduction ............................................................... 5-3 5.2 How to Set Up Internet Explorer For the Web Browser Interface .............
Page 205 - Options. This displays the Internet Options dialog box with tabs
Web Browser Interface Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 5-3 ST.TM.E10076.3 5.1 Introduction There is a range of diagnostic and other utilities that can be accessed via a web browser, such as Internet Explorer. Before these can be accessed it is important to ...
Page 206 - For Check for newer versions of stored pages, select Every visit
Web Browser Interface Page 5-4 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Figure 5.2: Settings Dialog Box 4. For Check for newer versions of stored pages, select Every visit to the page or any changes made to the pages will not be displayed. Click OK to sav...
Page 207 - Click LAN Settings to open the Local Area Network (LAN)
Web Browser Interface Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 5-5 ST.TM.E10076.3 6. Click LAN Settings to open the Local Area Network (LAN) Settings dialog box (see Figure 5.4). Figure 5.4: Local Area Network (LAN) Settings Dialog Box 7. Click Advanced to open the...
Page 208 - In the Exceptions area type the IP address of the Encoder.; Click OK as many times as necessary to close all dialog boxes until; only the Internet Explorer window is open.; Web Browser Interface Options; The Web Browser interface gives access to the options as shown in; Figure 5.6: Web Browser Interface Options
Web Browser Interface Page 5-6 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 8. In the Exceptions area type the IP address of the Encoder. 9. Click OK as many times as necessary to close all dialog boxes until only the Internet Explorer window is open. For Int...
Page 209 - Figure 5.9 when clicking Bandwidth Calculations, OFDM Bit-rate; Calculations; Figure 5.11 when clicking OSD Toolkit
Web Browser Interface Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 5-7 ST.TM.E10076.3 Figure 5.7: Build Info – Version Numbers Figure 5.8: Build Info - Release Notes Option 2, Tools 1 - displays a screen similar to: · Figure 5.9 when clicking Bandwidth Calculations, OF...
Page 210 - Bandwidth Calculations, OFDM Bit-rate Calculations - The Bit Rate; upon the symbol rate and bandwidth.
Web Browser Interface Page 5-8 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Bandwidth Calculations, OFDM Bit-rate Calculations - The Bit Rate Calculator (see Figure 5.9) allows you to enter various parameters and the optimal bit-rate (Mbit/s) is automatically...
Page 211 - input to the Encoder.
Web Browser Interface Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 5-9 ST.TM.E10076.3 Figure 5.11: Tools – OSD Toolkit Video Monitor - The Video Monitor (see Figure 5.12) displays the video input to the Encoder. Figure 5.12: Tools – Video Monitor Option 3, Customer Sup...
Page 212 - ) files to be downloaded from the Encoder to the PC. The
Web Browser Interface Page 5-10 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Figure 5.13: Backplane Modes Figure 5.14: Installed Modules Option 6, Licenced Features - shows a list of all the features which are, and can be, enabled when the appropriate licence...
Page 213 - performed since the Encoder was last switched on when Event Log or; Save the files to a disk:; From the shortcut menu click Save Target As.; Send to the files to TANDBERG Television.; Cloning a File; tftp –i `IP address of Encoder’ get clone
Web Browser Interface Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 5-11 ST.TM.E10076.3 Option 8, Encoder Errors – shows a list of Active Errors, Masked Active Errors and Latched Errors.Option 9, Event Log - shows the events and tests which have been performed since the...
Page 215 - Chapter 6; Preventive Maintenance and
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 6-1 ST.TM.E10076.3 Chapter 6 6. Preventive Maintenance and Fault-finding Contents 6.1 Introduction ............................................................... 6-3 6.2 Preventive Maintenance..................................
Page 217 - Routine Inspection - Cooling Fans; Damage Requiring Service
Preventive Maintenance and Fault-finding Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 6-3 ST.TM.E10076.3 6.1 Introduction This chapter provides the schedules and instructions, where applicable, for routine inspection, cleaning and maintenance of the equipment which sho...
Page 218 - Replacement Parts; used parts specified by the manufacturer or which have the same; Checks on Completion of Servicing; safe operating condition. Also, performance and EMC checks may be; Maintenance and Support Services; TANDBERG Television is a leader in the design, integration and; Warranty
Preventive Maintenance and Fault-finding Page 6-4 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Replacement Parts When replacement parts are required, be sure the service technician has used parts specified by the manufacturer or which have the same characteri...
Page 219 - Errors and Diagnostics Menus – When to Use; Error Messages
Preventive Maintenance and Fault-finding Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 6-5 ST.TM.E10076.3 6.4 Errors and Diagnostics Menus – When to Use Them 6.4.1 Error Messages Figure 6.1: Finding the Errors Menu Investigate any run-time errors by pressing the Active ...
Page 220 - LCD Display Test; key to cycle through the test patterns and to return to the menu.; Keyboard Test; pressed. Press the Quit softkey to return to the menu.; Fail Relay Test; – see Chapter 2, Installing the Equipment for the connector pin-out; Alarm Relay Test; ALARM connector – see Chapter 2, Installing the Equipment for the; Alarm LED Test; Press the Quit softkey to return to the menu.
Preventive Maintenance and Fault-finding Page 6-6 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Figure 6.2: Finding the Diagnostics Menu LCD Display Test Press the LCD Display softkey to access the option and then press any key to cycle through the test patter...
Page 221 - Buzzer Test; Fault-finding Philosophy
Preventive Maintenance and Fault-finding Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 6-7 ST.TM.E10076.3 Buzzer Test Press the Buzzer softkey to access the option which immediately causes a buzzer to sound. Press any key (except the Quit softkey) to turn the buzzer off...
Page 222 - User Accessible Fuse Replacement
Preventive Maintenance and Fault-finding Page 6-8 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 2. Confirm that the equipment hardware configuration is suitable for the purpose and has been correctly installed and connected (see Chapter 2, Installing the Equip...
Page 223 - If the replacement fuse also blows, do not continue. Disconnect the; Fault Symptoms; Breaks in Transmission; seamless, but this aspect is not guaranteed.; Noise Reduction; process. Noise reduction can be selected at the front panel.
Preventive Maintenance and Fault-finding Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 6-9 ST.TM.E10076.3 Figure 6.3: Orientation of Fuse Carrier If the replacement fuse also blows, do not continue. Disconnect the equipment and contact Customer Services for advice. 6.5....
Page 224 - Rate Buffer Setting
Preventive Maintenance and Fault-finding Page 6-10 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 6.5.5 Audio Fault-finding If having problems when using the Dolby E Pass-through coding mode then refer to Annex G, Audio Modes, for information about using this m...
Page 225 - Power Supply Problems/Green LED on Front; Symptoms; observed symptom(s) when a power supply failure is suspected.; Power LED Unlit
Preventive Maintenance and Fault-finding Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 6-11 ST.TM.E10076.3 6.8 Power Supply Problems/Green LED on Front Panel Unlit 6.8.1 Symptoms WARNING... DO NOT ATTEMPT TO SERVICE THE POWER SUPPLY UNIT AS OPENING OR REMOVING COVERS MA...
Page 226 - Disposing of This Equipment; encapsulated and should not be tampered with.
Preventive Maintenance and Fault-finding Page 6-12 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Table 6.4: Fans Not Working/Overheating Step Action If Result of Action is Yes… If Result of Action is No… 1 Check Fan Rotation. Inspect the fanslocated at the sid...
Page 227 - Annex A; Glossary
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page A-1 ST.TM.E10076.3 Annex A A. Glossary The following list covers most of the abbreviations, acronyms and terms as used in TANDBERG Television Limited Manuals. All terms may not be included in this manual. m m Micrometre (for...
Page 237 - Annex B; Technical Specification
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page B-1 ST.TM.E10076.3 Annex B B. Technical Specification Contents B.1 Inputs ...................................................................... B-3 B.1.1 Video............................................................. B-...
Page 239 - Inputs; SDI; Table B.1: Serial Digital Video Specification
Technical Specification Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page B-3 ST.TM.E10076.3 B.1 Inputs B.1.1 Video SDI Table B.1: Serial Digital Video Specification Item Specification Safety status SELV Connector designation SDI IN Connector type 75 W BNC female socket Inp...
Page 240 - Analogue Video Specification; Encoder Settings for PAL/NTSC Video Performance Figures; Table B.4: Encoder Settings for PAL/NTSC Video Performance Figures; PAL Video Performance Figures; Table B.5: PAL System Video Performance Figures
Technical Specification Page B-4 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Analogue Video Specification Table B.3: Analogue Video Specification Item Specification Analogue input 625 line composite PAL-B, -D, -G, -H, -I525 line composite NTSC-M, PAL-M as sp...
Page 241 - NTSC Video Performance Figures; Table B.6: NTSC System Video Performance Figures; Teletext Extraction; Teletext is extracted from the Vertical Blanking Interval (VBI).
Technical Specification Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page B-5 ST.TM.E10076.3 Pattern Item Specification VITS Line 17 Pulse/bar K-rating ± 0.5% KF VITS line 17 P-B ratio 99% - 101% VITS Line 17 Chrom/lum delay ± 20 ns VITS Line 17 Chrom/lum gain 95 – 105% 100...
Page 242 - International Television Standards; Table B.7 shows television standards appropriate to the Encoder.; Analogue and Digital Audio; Table B.8: Analogue and Digital Audio Specification
Technical Specification Page B-6 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 International Television Standards Table B.7 shows television standards appropriate to the Encoder. Table B.7: International Television Standards As indicated in Menus M M B G H I D...
Page 243 - Table B.9: MUSICAM Analogue Test Specification
Technical Specification Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page B-7 ST.TM.E10076.3 NOTES… 1. Refer to Annex G, Audio Modes when using these coding standards. 2. Problems may be experienced with some Receivers if the Encoder and Decoder are not using the same versi...
Page 249 - Control and Monitoring; Remote Control - Ethernet 1 and 2; Local control is by means of the front panel keypad and LCD display.; allows the unit to be controlled by an external master.
Technical Specification Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page B-13 ST.TM.E10076.3 B.4 Control and Monitoring B.4.1 Remote Control - Ethernet 1 and 2 Table B.21: Ethernet Specification Item Specification Safety status SELV Connector designation ETHERNET#1 and ETH...
Page 251 - AC Power Input; Table B.25: AC Power Supply Specification
Technical Specification Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page B-15 ST.TM.E10076.3 B.5 Power Supply B.5.1 AC Power Input This equipment is fitted with an wide-ranging power supply. It is suitable for supply voltages of 100-120 Vac -10% +6% or 220-240 Vac -10% +6%...
Page 252 - DC Power Input; supply in the range 12 to 36 Vdc.; Physical Details
Technical Specification Page B-16 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 B.5.2 DC Power Input The power unit used in the Encoder is a soft-start type designed for use on dc supplies having a negative or positive earth (vehicle chassis) voltage supply in...
Page 253 - Environmental Conditions; Compliance; Safety
Technical Specification Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page B-17 ST.TM.E10076.3 B.7 Environmental Conditions Table B.28: Environmental Specification Item Specification Operational Temperature -10 ° C to +50 ° C (14 ° F to 122 ° F) ambient with free air-flow Ov...
Page 254 - EMC
Technical Specification Page B-18 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 B.8.2 EMC 2 The equipment has been designed and tested to meet the following: EN 55022 and AS/NZS 3548 European Australia and New Zealand Emission Standard Limits and methods of me...
Page 255 - CE Marking; Cable Types
Technical Specification Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page B-19 ST.TM.E10076.3 B.8.4 CE Marking The CE mark is affixed to indicate compliance with the following directives:89/336/EEC of 3 May 1989 on the approximation of the laws of the Member States relating...
Page 256 - Option Modules; M2/EOM2/AUDLIN Additional Audio and Linear PCM; Asynchronous Data Input; Synchronous Data Input; serial communications data input interface.
Technical Specification Page B-20 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 B.10 Option Modules B.10.1 M2/EOM2/AUDLIN Additional Audio and Linear PCM Option Module See Section B.1.2, Audio for details. B.10.2 M2/EOM2/DAT RS-232 and RS-422 Data Input Option...
Page 257 - Connectors
Technical Specification Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page B-21 ST.TM.E10076.3 B.10.3 M2/EOM2/REMUX Remux Option Module Connectors NOTE… The M2/EOM2/REMUX Remux Option Module is supported by Encoder software version 2.2.0 and later. Table B.32: DVB ASI In 1, ...
Page 265 - Annex C; Predefined User Configurations
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page C-1 ST.TM.E10076.3 Annex C C. Predefined User Configurations Contents C.1 Introduction ...............................................................C-3 C.2 525/625 Line Default Settings ...................................C...
Page 267 - Table C.2: Default Configuration Settings
Predefined User Configurations Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page C-3 ST.TM.E10076.3 C.1 Introduction There are sixteen predefined user configurations. These are a quick and easy way to configure the Encoder without having to enter individual parameters. C.2 ...
Page 271 - except for those differences shown in Table C.3.
Predefined User Configurations Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page C-7 ST.TM.E10076.3 C.4 Predefined User Configurations The predefined user configurations have the same settings as Table C.2 except for those differences shown in Table C.3. Table C.3: Predefin...
Page 273 - Annex D; Language Abbreviations
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page D-1 ST.TM.E10076.3 Annex D D. Language Abbreviations Languages are shown in alphabeticalorder. LANGUAGE ABBREVIATION AFRIKAANS AFR ALBANIAN ALB ARABIC ARA BASQUE BAQ BRETON BRE BULGARIAN BUL CHINESE CHI CZECH CZE DANISH DAN ...
Page 275 - Annex E
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page E-1 ST.TM.E10076.3 Annex E E. Creating and Downloading a Logo Contents E.1 Introduction ............................................................... E-3 E.2 Summary of Features................................................
Page 277 - are required, Osd Creator and Osd Loader. Once a logo has been; OSD Programs Built Into the Encoder
Creating and Downloading a Logo Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page E-3 ST.TM.E10076.3 E.1 Introduction The Encoder includes a logo overlay facility whereby an image can be overlaid onto the active video prior to encoding. This enables broadcasters to trademar...
Page 279 - Figure E.3: Files for OSD Creator and Loader; Creating a Logo Using OSD Creator; Using OSD Creator; Add transparency in the desired areas.
Creating and Downloading a Logo Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page E-5 ST.TM.E10076.3 Figure E.3: Files for OSD Creator and Loader E.4 Creating a Logo Using OSD Creator Osd Creator (creator.exe) is an application for creating logo files (.osd format) for use ...
Page 280 - An example of a logo is shown in Figure E.4.; Creating Transparency; Each pixel in a .bmp file is represented by a red, green and blue
Creating and Downloading a Logo Page E-6 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 An example of a logo is shown in Figure E.4. Figure E.4: OSD Creator Screen Showing Example Logo E.5.2 Loading a .bmp File Select File/Open from the menu, and choose a file ...
Page 281 - for the red, green and blue and transparency component. The; inactive area. Transparency can added manually, with a brush, or by; Adding Transparency Manually; should become background-coloured. Repeat until the whole of the; Adding Transparency Using a Key File
Creating and Downloading a Logo Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page E-7 ST.TM.E10076.3 Osd Creator uses a colour palette with a maximum of 256 entries. Each pixel in the image is mapped to an entry in the palette, which holds a value for the red, green and blu...
Page 282 - Editing the Palette; Downsampling
Creating and Downloading a Logo Page E-8 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Click the Key File toolbar button. Select the key file. The inactive area of the image should now be transparent (background-coloured). Change the background colour to verif...
Page 283 - Downloading a Logo Using OSD Loader; Figure E.5: OSD Loader Screen Showing Example Logo; Using the OSD Loader; found on the Encoder front panel by selecting Setup/System/Remote
Creating and Downloading a Logo Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page E-9 ST.TM.E10076.3 E.6 Downloading a Logo Using OSD Loader The Osd Loader application (osd.exe) is used for downloading logo (.osd) files to the Encoder and controlling which are displayed.The...
Page 284 - Download an .osd File; be displayed in the main window. Wait for Transfer Completed OK to; time. The maximum logo file size that can be stored in Flash is 65 279
Creating and Downloading a Logo Page E-10 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 The Resolution Mode must be set to match the video resolution being used. This adjusts the preview screen to the dimensions of the active video. Table E.1: Resolution Modes...
Page 286 - Show and Hide Regions; Auto Show box is checked, the initial state is Shown. Use the Show,; Multiple Regions
Creating and Downloading a Logo Page E-12 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 E.7.3 Show and Hide Regions The Download button defines a Region in the Encoder, which remains until the Encoder is turned off, the Remove button is clicked, or the Region ...
Page 287 - Auto Show off, then click Show when display is required.
Creating and Downloading a Logo Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page E-13 ST.TM.E10076.3 E.8 Fault-finding If there appears to be a problem creating or downloading a logo check the following: · If the Communications box reads "Error Creating Socket", th...
Page 289 - Annex F; Band Plans
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page F-1 ST.TM.E10076.3 Annex F F. Band Plans Contents F.1 Channels and Centre Frequencies ........................... F-3 List of Tables Table F.1: Australia .........................................................................
Page 291 - Channels and Centre Frequencies; has options called Band Plan and Channel (see; number corresponds to a particular frequency.
Band Plans Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page F-3 ST.TM.E10076.3 F.1 Channels and Centre Frequencies The Output Menu has options called Band Plan and Channel (see Chapter 4, Operating the Equipment Locally).Once a country has been selected in the Band Plan op...
Page 297 - Annex G; Audio Modes
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page G-1 ST.TM.E10076.3 Annex G G. Audio Modes Contents G.1 Analogue Audio ........................................................ G-3 G.2 Digital Audio ............................................................. G-3 G.3 Embed...
Page 299 - Digital Audio; the Encoder and the audio may need to be genlocked. Figure G.2 shows
Audio Modes Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page G-3 ST.TM.E10076.3 G.1 Analogue Audio Figure G.1 shows the coding methods that may be used with the analogue audio input. Analogue Audio Code to LinearPCM Linear PCM Internal Coding MUSICAM Dolby (AC-3) Independe...
Page 300 - Embedded Audio on the SDI; details. DID 1F4 is reserved for EDH error packets.; Detail of Encoder Operation; The Encoder can de-embed any two DID s at any one time, thus giving a
Audio Modes Page G-4 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 G.3 Embedded Audio on the SDI Figure G.3 shows the audio signal flow on the Base Board. While six audio stereo pairs are available, only two stereo pairs can be processed by the Base Board at a...
Page 301 - Figure G.3: Embedded Audio and Stereo Pairs
Audio Modes Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page G-5 ST.TM.E10076.3 4:1 4:1 Group 1 Group 2 Group 3 Group 4 Group 1 Group 2 Group 3 Group 4 SDI Embedded 1 SDI Embedded 2 Audio Router Stereo Pair A SDI Embedded 4 De-embedder 1 De-embedder 2 Interface and Convers...
Page 303 - Annex H
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page H-1 ST.TM.E10076.3 Annex H H. Error Messages Contents H.1 Introduction ...............................................................H-3 H.2 Dealing with Error Messages ....................................H-3 H.3 General Er...
Page 305 - interface on the Alarm connector (see Chapter 2, Installing the; Dealing with Error Messages; The action to take when an error message is reported is given in the
Error Messages Page H-3 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 H.1 Introduction WARNING… DO NOT REMOVE THE COVERS OF THIS EQUIPMENT. HAZARDOUS VOLTAGES ARE PRESENT WITHIN THIS EQUIPMENT AND MAY BE EXPOSED IF THE COVERS ARE REMOVED. ONLY TANDBERG TELEVIS...
Page 306 - General Errors
Error Messages Page H-4 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 H.3 General Errors Table H.1: General Error Messages Error Message Action to Take LCD Not Found Temp Sensor No Pulse Temp Sensor Bad CRC Temp Sensor Bad Data Temp Sensor Busy Temp Sensor Com...
Page 307 - Video Source Related Errors
Error Messages Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page H-5 ST.TM.E10076.3 H.4 Video Source Related Errors Table H.2: Video Source Error Messages Error Message Action to Take Comms Error Power Encoder off, then check that the Base Board is firmly seated in thechass...
Page 308 - VBI Related Errors
Error Messages Page H-6 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 H.5 VBI Related Errors Table H.3: VBI Error Messages Error Message Action to Take Duplicate VBI PID Invalid VBI PID Duplicate Teletext PID Invalid Teletext PID Check the Encoder configuratio...
Page 309 - Video Encoder Related Errors; Audio Related Errors
Error Messages Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page H-7 ST.TM.E10076.3 H.8 Video Encoder Related Errors Table H.6: Video Encoder Error Messages Error Message Action to Take Comms Error Config Update VCM Stopped Power Encoder off, then check that the Base Board ...
Page 310 - Satellite Modulator Related Errors; Table H.8: Satellite Modulator Error Messages
Error Messages Page H-8 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Error Message Action to Take Level Clipping Left Level Clipping Right Audio input level on the reported channel is too high and is being clipped.Reduce the audio input level. Embedded Source...
Page 311 - Remux Related Errors
Error Messages Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page H-9 ST.TM.E10076.3 H.11 Remux Related Errors Table H.9: Remux Error Messages Error Message Action to Take Overflow On Input 1 Overflow On Input 2 Overflow On Input 3 Reduce incoming bit-rate. Overflow Motherbo...
Page 313 - Annex I; Accuracy of Frequency Sources
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page I-1 ST.TM.E10076.3 Annex I I. Accuracy of Frequency Sources This equipment is based around ISO/IEC 13818 specifications (commonly known as MPEG-2) and within these specifications all timing is derived from a 27 MHz system cl...
Page 315 - Annex J; Use of Remux Card in ASTC
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page J-1 ST.TM.E10076.3 Annex J J. Use of Remux Card in ASTC Contents J.1 Remux Card In ATSC With Internal PSIP ................. J-3 J.2 Remux Card In ATSC With External PSIP ................ J-3
Page 317 - Remux Card In ATSC With Internal PSIP; Remux Card In ATSC With External PSIP
Use of Remux Card in ASTC Page J-3 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 J.1 Remux Card In ATSC With Internal PSIP The Encoder automatically remuxes ATSC streams arriving at its inputs, as in DVB. The Encoder uses the PAT (Program Association Table) an...
Page 318 - If the External PSIP input port is changed, the Encoder may fail to
Use of Remux Card in ASTC Page J-4 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 In this configuration the Encoder generates the PAT, CAT and PMT for all programs but it is the responsibility of the user to provide all the PSIP for the associated programs. Any...
Page 319 - Annex K; EDH Capability for E57xx Encoders
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page K-1 ST.TM.E10076.3 Annex K K. EDH Capability for E57xx Encoders Contents K.1 EDH Capability for E57xx Encoders.......................... K-3 List of Tables Table K.1: EDH Capability Matrix for E57xx Encoders....................
Page 321 - find the mux firmware version for a particular Encoder refer to
EDH Capability for E57xx Encoders Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page K-3 ST.TM.E10076.3 K.1 EDH Capability for E57xx Encoders Table K.1 contains EDH capability for different mux firmware versions. To find the mux firmware version for a particular Encoder refe...
Page 323 - Indexes
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Index-1 ST.TM.E10076.3 Indexes This section is split into two parts. The first is the General Index and the second is devoted to Setup Menus and Associated Options.The following conventions are used in this manual: a page number ...
Page 330 - Setup Menus and Associated Options Index
Indexes Index-8 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder ST.TM.E10076.3 Setup Menus and Associated Options Index 1 1.service menu audio (MPEG-2) option, 4-103 BISS key code option, 4-101 CA input option, 4-100 data (type of data) option, 4-103 ECM (CA) PID option, 4-102...
TANDBERG 7000
Manual
TANDBERG EX90
Manual
TANDBERG D11624
Manual
TANDBERG MXP
Manual
TANDBERG Intern MXP
Manual
TANDBERG D13922.06
Manual
TANDBERG 2000MXP
Manual
TANDBERG 1500MXP
Manual
TANDBERG 880 MXP
Manual
TANDBERG MSE 8510
Manual
TANDBERG D14306.01
Manual
TANDBERG Utility
Manual
TANDBERG 6000 MXP
Manual
TANDBERG D1440902
Manual
TANDBERG D13751.01
Manual
TANDBERG D12809
Manual
TANDBERG D1392602
Manual
TANDBERG MPS 200
Manual
TANDBERG TC2.1
Manual