TANDBERG 550 - Manuals

D1374201_User_Manual_T550_T770_MXP_CCM Table of Contents 1 Introduction ............................................................................................................................... 1 1.1 At a Glance .....................................................................................

1 1 Introduction This User Manual is provided to help you make the best use of your TANDBERG unit. The TANDBERG 550/770 MXP for Cisco CallManager offers superior audio and video quality in a fully-featured unit. Main features  Delivers the ultimate visual communication experience, with video quali...

D1374201_User_Manual_T550_T770_MXP_CCM 4 1.2 Settings Menu Structure The settings menu structure is shown below. Press to enter or leave the settings menu.

5 2 Installation Precautions  Never install telephone wiring during a lightning storm.  Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.  Never touch uninstalled telephone wires or terminals unless the telephone line has been disconnect...

D1374201_User_Manual_T550_T770_MXP_CCM 6 2.1 Unpacking and Mounting Unpacking The TANDBERG 550/770 MXP for Cisco CallManager consists of the following items:  Videoconferencing system  Table microphone  Remote control  Batteries  User manual on CD  Cables  Power supply Mounting Place t...

Installation 7 2.2 Connecting Cables 1. Microphone Cable  Connect the microphone to the microphone cable.  Connect the microphone cable to microphone input 1 on the system. 2. Monitor Cable(s) Scart (Europe):  Connect the Scart adapter to one of the Scart connectors on your monitor. Scart (Eur...

D1374201_User_Manual_T550_T770_MXP_CCM 10 2.3 Monitor Configuration Power on Power on the monitor and use the monitor remote control to select the Audio/Video input used (refer to your monitor manual). If you are using S-video from the system, remember to select S-Video input to avoid a black and wh...

11 3 General Use Wake up the system W hen the system is not in use, it is in standby mode and the screen is black. W ake up the system by picking up the remote control. An incoming call or pressing any key on the remote control will also wake up the system. If the system does not respond Make sure t...

D1374201_User_Manual_T550_T770_MXP_CCM 12 3.1 The Welcome Menu W hen the system is switched on, you will see the welcome screen. The welcome screen presents the Main menu and displays your Main Camera image in the background (Main Camera is system default). The following menu will appear when not in...

General Use 13 3.2 Using the Remote Control The system is controlled with a remote control. Think of the remote control as a mobile phone with number keys and call keys. Use the arrow keys and OK to navigate the menu. The system ’ s most commonly used functions are also accessible directly from the ...

General Use 37 3.5.8 Storing and Retrieving Parked Calls A call can be parked so that you or someone else can retrieve it from another phone or video endpoint in the Cisco CallManager system. Action Procedure Park an active call: During a call, press the Park softkey. (You might need to press the Mo...

41 4 Settings The Settings menu contains all the settings of the system. Making changes to Settings will change the behavior of the system. Settings contain:  View Status  Network Settings  Audio Settings  Display Settings  Presentation  Lines Note! The Network Settings menu may not be a...

Settings 47 4.2 Network Settings The network settings menu enables you to configure IP, TFTP, wireless LAN, DNS and the data port.  IP Settings  W ireless LAN Settings  TFTP Settings  DNS Settings  Data Port Note! The W ireless LAN Settings menu may not be available. This depends on whethe...

Settings 57 4.4 Display Settings The Display settings menu enables you to configure picture layouts, screen formats, focus, whitebalance and brightness. There are two submenus:  Screen Settings  Picture Control

65 5 Peripheral Equipment PC-interface (serial cable): A PC can be connected to your TANDBERG 550/770 for Cisco CallManager using a serial cable, see the TANDBERG 550 MXP and 770 MXP interfaces below. This enables you to interact with the unit using data port commands. (This is also possible over LA...

66 6 Appendices Appendices:  Appendix 1: Technical Specification  Appendix 2: Declaration of Conformity

Appendices 67 Appendix 1 Technical Specification Contact your TANDBERG representative for a Technical Specification for TANDBERG 550/770 MXP for Cisco CallManager or download from www.tandberg.net .

D1374201_User_Manual_T550_T770_MXP_CCM 68 Appendix 2 Declaration of Conformity Contact your TANDBERG representative for a Declaration of Conformity or download from www.tandberg.net .

69 7 Index C Call Status ................................................. 51 Codec .......................................................... 9 Connecting cables ..................................... 14 D Declaration of Conformity .......................... 75 DNS Settings ............................

70 8 Glossary A Alert speaker: The internal speaker will warn you of an incoming call even though the monitor may not be switched on. Audio call: Audio call equals a telephone call. You can make a call with the video system with audio only. C Call status: Comprehensive information about the call lis...