Tanaka TCP-381 - Manuals - manualsarea.com

Page 2 - Owner’s Manual; Before using this unit:; Read the operator’s manual carefully.; WARNING; The engine exhaust from this product

www.tanakapowerequipment.com 1 [email protected] Owner’s Manual TCP-25/210/381 Before using this unit: • Read the operator’s manual carefully. • Check that the cutting equipment is correctly assembled and adjusted. • Start the unit and check the carburetor adjustment. See “Maintenance”. WARNING...

Page 3 - Fuel Cock

www.tanakapowerequipment.com 2 [email protected] Owner’s Manual TCP-25/210/381 1. What is What? Since this manual covers several models, there may be some difference between pictures and your unit. Use the instructions that apply to your unit. 1. Carrying Handle 2. Delivery Port 3. Priming Plug...

Page 4 - Before operation

www.tanakapowerequipment.com 3 [email protected] Owner’s Manual TCP-25/210/381 2. Warnings and Safety Instructions. Before operation • Protection is required for head, eyes, ears, hands and feet. Wear a suitable hard hat, goggles, ear covers, heavy gloves and safety shoes. • Dress properly, do ...

Page 5 - Assembly Procedure; Fuel

www.tanakapowerequipment.com 4 [email protected] Owner’s Manual TCP-25/210/381 Hose to pump connection. (Fig. 1-1) Care must be taken to ensure that tight connection is made between the female unions, and the male pump stubs. NOTE! An air leak at either union will greatly reduce the pump effici...

Page 6 - Running

www.tanakapowerequipment.com 5 [email protected] Owner’s Manual TCP-25/210/381 Priming (Fig. 2-2) It is necessary to prime the pump before the initial usage. This is done by filling the pump body with water via the priming plug on the top of the pump housing. CAUTION! Never start the machine wi...

Page 7 - Cleaning the air filter

www.tanakapowerequipment.com 6 [email protected] Owner’s Manual TCP-25/210/381 5. Maintenance. Water pump (Fig. 3-1) All water in the pump should be drained from the housing, by means of the drain plug. Water left in the pump housing may cause damage by corrosion; there is also the danger of *f...

Page 8 - Maintenance schedule

www.tanakapowerequipment.com 7 [email protected] Owner’s Manual TCP-25/210/381 Maintenance schedule Below you will find some general maintenance instructions. For further information please contact your service dealer. Daily maintenance • Clean the exterior of the pump. • Check that nuts and sc...

Page 9 - Engine

www.tanakapowerequipment.com 8 [email protected] Owner’s Manual TCP-25/210/381 6. Technical Data NOTE : Equivalent noise level/vibration level are calculated as the time-weighted energy total for noise/vibration levels under various working conditions with the following time distribution : ½ id...

Page 10 - Declaration of conformity; Serial No. up from

www.tanakapowerequipment.com 9 [email protected] Owner’s Manual TCP-25/210/381 Declaration of conformity We, Tanaka Kogyo Co.,Ltd.,3-4-29 Tsudanuma,Narashino,Chiba,Japan Declare under our sole responsibility that the product, engine pump model TCP-25,381 to which this declaration relates is in ...