Tanaka TCS-3401 - Manual
Tanaka TCS-3401 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Owner’s Manual; Before using this unit:; Read the operator’s manual carefully.; WARNING; The engine exhaust from this product
- Page 4 – Warnings and safety instructions
- Page 5 – Assembly procedures; Then fix the clamp nuts temporarily.; Never try to start engine without side case securely fastened.; is excessively loosened, it may get out of the groove in the bar.
- Page 6 – Operating procedures; Fuel; Always use branded 89 octane unleaded gasoline.; Fueling; Always shut off the engine before refueling.
- Page 7 – oil. When the engine is running, the chain oil is; ADJUSTMENT OF CHAIN OIL SUPPLY; Do not try to turn the screw beyond level marks.
- Page 8 – CHAIN CATCHER
- Page 9 – BASIC TECHNIQUES FOR MAKING FELLING, LIMBING AND BUCKING CUTS; more efficient and safer.
- Page 10 – BASIC RULES FOR FELLING TREES; Felling is more than cutting down a tree. You must also
- Page 11 – LIMBING; Limbing is removing the branches from a felled tree.; LIMBING THICK BRANCHES; Take a firm stance. Begin with an upper cut.
- Page 12 – THICK LOG, LARGER THAN GUIDE BAR LENGTH; and can result in kickback.; CROSS CUTTING LOGS, PRESSURE ON BOTTOM
- Page 14 – Cleaning the air filter; The air filter must be cleaned from dust and dirt in order to avoid:
- Page 15 – For long-term storage
- Page 16 – SHARPENING ANGLES FOR SHARPENING SAW; CHAIN SHARPENING; Gloves should be used when sharpening chain.
- Page 17 – Maintenance schedule
- Page 20 – IMPORTANT NOTICE; THIS INFORMATION IS FOR THE US AND CANADIAN MARKETS ONLY.; MODEL NUMBER
Owner’
Owner’
Owner’
Owner’
Owner’s Man
s Man
s Man
s Man
s Manual
ual
ual
ual
ual
Model Numbers:
T
T
T
T
TCS-3401
CS-3401
CS-3401
CS-3401
CS-3401
CHAINSAW
CHAINSAW
CHAINSAW
CHAINSAW
CHAINSAW
P/N 29356
Date 04-20-01
Supplier To The Outdoor Power Equipment Industry
ISM, Inc. • 1028 4
th
Street SW • Auburn, WA 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212
www.tanakapowerequipment.com
TCS-3401
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
www.tanakapowerequipment.com 1 [email protected] Owner’s Manual TCS-3401 Before using this unit: • Read the operator’s manual carefully. • Check that the cutting equipment is correctly assembled and adjusted. • Start the unit and check the carburetor adjustment. See “Maintenance”. Warning, kick...
www.tanakapowerequipment.com 3 [email protected] Owner’s Manual TCS-3401 2. Warnings and safety instructions Operator Safety WARNING! This chain saw is designed especially for tree care and surgery. Only persons trained in tree care and surgery may use this saw. Observe all literature, procedur...
www.tanakapowerequipment.com 4 [email protected] Owner’s Manual TCS-3401 3. Assembly procedures NOTE! Slightly move the bar back and forth and make sure the chain tension boss (4) fits into the hole (5) in the bar properly. 4. Confirm the direction of saw chain (1) is correct as in the figure, ...
