Symphonic SC1303, SC1903 - Manuals

Symphonic SC1303, SC1903 – Manual in PDF format online.

Manuals:

Manual

Manual Symphonic SC1303, SC1903

Summary

Page 2 - CAUTION; IMPORTANT SAFEGUARDS

1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed Warnings -All warnings on the appliance and in the operating instructions shoul...

Page 4 - PRECAUTIONS; LOCATION; IMPORTANT COPYRIGHT INFORMATION

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation....

Page 5 - TABLE OF CONTENTS; A NOTE ABOUT RECYCLING; OPERATING CONTROLS AND FUNCTIONS 7; INDICE

- 5 - EN 9I03 TABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of any materials inaccordance with your local recycling regulations.Batteries should never be thrown away or incinerated but disposed of in accordance with your ...

Page 7 - OPERATING CONTROLS AND FUNCTIONS

- 7 - EN 9I03 OPERATING CONTROLS AND FUNCTIONS NOTE: • We do not recommend the use of universal remote controls. Not all of the functions may be controlled witha universal remote control.If you decide to use a universal remote control with this unit, please be aware that the code number givenmay not...

Page 9 - PREPARATION FOR USE; ANTENNA/CABLE CONNECTIONS; VHF/UHF COMBINED ANTENNA; Note to CATV system installer:

- 9 - EN 9I03 PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS VHF/UHF COMBINED ANTENNA The VHF/UHF Rod Antenna (supplied with 13”model only) is detachable. Insert the stem of theantenna into the hole on the upper-back portion ofthe TV/VCR. Connect the VHF/UHF Rod Antenna orVHF/UHF Combination Antenna ...

Page 10 - INSTALLING THE BATTERIES; SET UP FOR USE; Plug in the TV/VCR power cord; CHANNEL SET UP FOR THE; After scanning; EXTERNAL INPUT MODE; AUX

- 10 - EN 9I03 INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of thearrow. 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by thepolarity (+/-) markings. 3)Replace the cover. SET UP FO...

Page 11 - TO SELECT A DESIRED CHANNEL; CLOCK SET UP; TO CHANGE CLOCK SETTING; In the example below, the clock is to be set to:

- 11 - EN 9I03 TO SELECT A DESIRED CHANNEL You can select the desired channel by using theCHANNEL K or L button on or directly pressing the number buttons on the remote control.Note for using the number buttons: • When selecting cable channels which are higherthan 99, press the +100 button first, th...

Page 12 - Select “CHANNEL SET UP”; AUTOMATIC CLOCK SETTING; Select “SETTING CLOCK”

- 12 - EN 9I03 DELETING (OR ADDING) CHANNEL CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “CHANNEL SET UP” Press the MENU button on theremote control.Press the PLAY/ K or STOP/ L but- ton to point to “CHANNEL SETUP”.Then, press the F.FWD/ B button. 2 Beg...

Page 13 - SELECTING THE LANGUAGE; First Sunday of April :

- 13 - EN 9I03 1 Select “CHANNEL SET UP” Press the MENU button on theremote control.Press the PLAY/ K or STOP/ L but- ton to point to “CHANNEL SETUP”.Then, press the F.FWD/ B button. 2 Select “ADD/DELETE CH” Press the PLAY/ K or STOP/ L but- ton to point to “ADD/DELETECH”.Press the F.FWD/ B button. ...

Page 14 - TV OPERATION; WATCHING A TV PROGRAM; Select the channel number; GAME MODE; TO CANCEL THE GAME MODE; PICTURE CONTROL; Select “PICTURE CONTROL”; DEGAUSSING

- 14 - EN 9I03 TV OPERATION WATCHING A TV PROGRAM 1 Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttonson the remote control. Remember: If the TV/VCR is connecte...

Page 15 - CLOSED CAPTION SYSTEM; Select “CAPTION”; TV RATING SET UP; Select “V-CHIP SET UP”

- 15 - EN 9I03 CLOSED CAPTION SYSTEM You can view specially labeled (cc) TV programs,movies, news, pre-recorded tapes with either a dia-logue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioningthe dialogues and the contents of n...

Page 16 - MPAA RATING SET UP; Selection

- 16 - EN 9I03 3 Select your desired item Press the PLAY/ K or STOP/ L button to point to your desired item.Then, press the F.FWD/ B button to select [BLOCK] or [VIEW]. • When you select the rating cate-gory and turn it [BLOCK], thehigher rating will turn [BLOCK]automatically. Also, the lower rating...

Page 17 - PLAYBACK; This TV/VCR will operate with any cassette that has the; BLANK REPEAT; TO CANCEL THE REPEAT PLAY MODE; AUTO REPEAT PLAYBACK; INSERTING A CASSETTE

- 17 - EN 9I03 PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. The TV/VCR has the auto repeat function that allowsyou to repeat a tape indefinitely without touching thePLAY ...

Page 18 - PICTURE SEARCH; STILL PICTURE; ZERO RETURN; WILL NOT; In the example below:; TIME SEARCH

- 18 - EN 9I03 PICTURE SEARCH This feature is very useful in finding or skipping overa particular scene on a tape. In this mode, the soundwill be muted.1)You may view a video tape at a high speed in either a forward or reverse direction by pressingthe F.FWD or REW button during playback. (in theSP /...

Page 19 - PICTURE CONTROLS; Select “USER’S SET UP”; RECORDING

- 19 - EN 9I03 PICTURE CONTROLS TRACKING ADJUSTMENT • Tracking adjustment will be set automatically(Digital Tracking function) when you start play-back. • However when playing pre-recorded tapes or tapesrecorded on units other than your own, noise lines(black and white streaks) may appear on the pla...

Page 20 - NORMAL RECORDING; or

- 20 - EN 9I03 Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape tothe point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. You can ONLY w...

Page 21 - pushes; Begin OTR; The program with an earlier start has priority.; Select “TIMER PROGRAMMING”; TIMER RECORDING; In the example below, the timer is being set to record:

- 21 - EN 9I03 Push(es) Display Recording length 1 push (normal recording) 2 pushes 0:30 30 minutes 3 pushes 1:00 60 minutes 17 pushes 8:00 480 minutes 3 Begin OTR Press the REC/OTR button on theTV/VCR as many times as needed.The recording length will be deter-mined by the number of times youpress t...

Page 22 - PM; program using the PLAY/; TO CORRECT A PROGRAM; While setting a program; )Press the POWER button to set automatic timer; TIMER PROGRAM EXTENSION

- 22 - EN 9I03 For every day recording : To record a TV program at the same time on the same channel every day.(Example: Monday through Sunday) Press the STOP/ L (down) button until “EVRY DAY” appears.Then, press the F.FWD/ B but- ton. For weekly recording : To record a TV program at the same time o...

Page 23 - TO CHECK THE BEGIN/END TIME; HINTS FOR AUTOMATIC; WAKE UP TIMER; Use the remote control for this procedure.; Select “WAKE UP TIMER”

- 23 - EN 9I03 TO CANCEL AN AUTOMATIC TIMERRECORDING • After setting a program; 1)Press the POWER button.2)Repeat steps [1] ~ [2] on page 21 and select a program you want to cancel. 3)Press the T-PROG. CLEAR button.4)Press the MENU button on the remote control to return to TV mode. • While recording...

Page 24 - TO CANCEL THE WAKE UP TIMER; Select “SLEEP TIMER”; TO CANCEL THE SLEEP TIMER; COPYING A VIDEO TAPE

- 24 - EN 9I03 3 Set wake up time Press the PLAY/ K or STOP/ L but- ton until to point to “TIME”.Press the F.FWD/ B or REW/ s button until your desired wake uptime appears.Each additional push will increase (or decrease) thetime by 10 minutes. 4 Exit the Wake Up Timer setting Press the MENU button o...

Page 25 - MAINTENANCE; chase a good quality VHS Video Head Cleaner.; SERVICING; ON SCREEN DISPLAY; WHEN THE CLOSED CAPTION MODE IS OFF:; The On Screen Display disappear after 5 seconds.; OFF mode; SPECIAL FEATURES; REAL TIME TAPE COUNTER; Press once

- 25 - EN 9I03 CABINET CLEANING • Wipe the front panel and other exterior surfaces ofthe TV/VCR with a soft cloth immersed in luke-warm water and wrung dry. • Never use a solvent or alcohol. Do not spray insec-ticide liquid near the TV/VCR. Such chemicalsmay cause damage and discoloration to theexpo...

Page 26 - TROUBLESHOOTING GUIDE; PROBLEM

- 26 - EN 9I03 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR,locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column toremedy the problem. PROBLEM CORRECTIVE ACTION No power. • M...

Page 27 - SPECIFICATIONS; GENERAL SPECIFICATIONS; CABLE CHANNEL DESIGNATIONS

- 27 - EN 9I03 SPECIFICATIONS GENERAL SPECIFICATIONS CRT : 13 or 19 inch in-line gun, 90˚deflection tube Television system : NTSC-M Closed caption system :§15.119/FCCVideo Heads : Rotary two-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec. Tuner channel TV...

Page 28 - CONTROLES DE OPERACIÓN Y SUS FUNCIONES

- 28 - ES 0I29 1 Toma de entrada de vídeo (VIDEO)– Conéctela a la toma de salida de vídeo de suvideocámara u otra videograbadora. 2 Toma de entrada de audio (AUDIO)– Conéctela a la toma de salida de audio de suequipo de audio, videocámara u otravideograbadora. 3 Botón de la alimentación (POWER)– Púl...

Page 30 - CONEXIONES DE ANTENA/CABLE; ANTENA COMBINADA DE VHF/UHF; MODO DE ENTRADA EXTERNA

- 30 - ES 0I29 CONEXIONES DE ANTENA/CABLE ANT. ANT. IN OUT Antena de varilla UHF/VHF(incluído para solamente 13”) Antena combinada deVHF/UHF(no incluído) Combinador deVHF/UHF(no incluído) Antena UHF(no incluído) Antena VHF(no incluído) Desde el sistema de Cable Cable coaxilde 75 ohm (no incluído) Ca...

Page 31 - En el ejemplo de abajo, el reloj va a ajustarse así:; AJUSTE DEL RELOJ

- 31 - ES PREPARACIÓN DE CANALES POR PRIMERA VEZ 1) Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA están-dar. NOTA: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufarel cable de alimentación.2) Pulse el botón POWER para enc...

Page 32 - Printed in Malaysia; LIMITED WARRANTY; LIMITS AND EXCLUSIONS:; Customer Service; FUNAI CORPORATION

Printed in Malaysia 0EMN02088 T5403UD / T7403UD * * * * * LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workman-ship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one...