Page 5 - , and with high humidity as
4 Warnings: Please install the device in a right way to avoid driver's sight and airbag to be hindered. Any loss or damage of product, passengers, or other property caused by mistakes of mounting or installing of the device will be not covered within the warranty and not be the responsibility of the...
Page 6 - Appearance and Port Description:; Car charger
5 Appearance and Port Description: Accessories: Car charger USB Cable Bracket Cradle User Manual Warranty card Map instructions Illustrations on screen display: System UI(Projector Screen) Under this UI, click icon down the screen to enter the function page. Then there will be Looped playback of car...
Page 7 - Battery Status Icon:; the first three times, but not over 16 hours.; Charger Application:
6 In this interface, click the icons on the screen to enter the corresponding functions; and click the arrow on the right bottom to turn the page. There will be an animation effect when turning the page. Battery Status Icon: Full======================================================>Drained When ...
Page 8 - Function introduction
7 When you use car charger, please start car engine first, then connect it to the device to avoid possible damage to the device due to overloaded pulse current during ignition. Please pull it out when you stop the engine, and plug it in again after next ignition. Power On the device In power off sta...
Page 11 - Picture Display; to rotate
10 Picture Display This is for Photo Display with format JPG, BMP and GIF stored in NandFlash or TF card. Operation: On system main menu, click icon to enter into Picture Display function. Display of UI for file selection: On this UI, click icon to search photo files not listed in the appointed pict...
Page 13 - Jump to the appointed page; System Setting
12 In eBook Reading mode, click right icon to enter into bookmark setting, display of dialogueblock is shown as in the illustration below: Click icon to set a bookmark for the current page. Directly click selected bookmark stored in the dialogueblock to remove this bookmark; click icon to jump to th...
Page 16 - to; Time Setting; This is for checking system resources:; Coordinates Calibration
15 "NandFlash" is the inside memory of the device, "SDMMC" is the TF card. So the start-up music can be selected from both of them. Select one, click the button icon to confirm, then back to the upper-level interface. Time Setting This is for setting time of the system. After enterin...
Page 17 - Update Logo
16 On this UI, use stylus to tap at the center of the cross, then tap on other crosses which will move after each tapping until finish. Update Logo The function is for updating start-up logo of the device. Please be sure that you have stored the Logo pictures into the TF card. After entering into th...
Page 18 - GPS Path; icon, a dialogue frame will pop up on screen, as it shown below:
17 GPS Path Using this function is to set GPS path for your navigation. Screen display will show as follows: Files listed on the present screen belong to the saved ones in TF card, so click them can read the file. File folders of TF card will be listed on screen. Click a folder to open it. Select GP...
Page 19 - FLASH formatting functions:; Select the desired formatting and click icon format, as shown:; USB
18 Click icon on the upper right corner to return to GPS path interface.. FLASH formatting functions: In the path setup interface, as shown: Click the icon, enter the format: interface, as shown: Select the desired formatting and click icon format, as shown: Warm remind The machine can not use a com...
Page 20 - How to save and allocate files in TF card:
19 Click the desired connection mode and close the window to save the chosen mode. How to save and allocate files in TF card: Usually, the files used by the device are saved in the appointed folders to ensure the access for embedded program of the device. You may save files into other folders or und...
Page 21 - Specifications
20 Specifications CPU SiRF Atlas V Memory 64M NandFlash 2GB Chip GRF3i+ Antenna Built-in folded antenna Memory Card Applicable for a Maximum up to 8GB TF card Screen Type TFT Touch Screen Screen Size 4.3” Screen Color 65K colors Dot Matrix Display 480*272 Extension Slot TF Battery Type Li-polymer ba...
Page 22 - Trouble clearing
21 Trouble clearing No. Fault Possible Cause Solutions 1 No power on Battery drained (The screen has no further display after a blink when pressing power on button.) Please refer to the description of battery charging in this manual, only use the enclosed charger to charge the device. The start inte...