SYLVANIA SCR2608 - Manuals

LOCATION OF CONTROLS 1. LCD DISPLAY- A (for CD, CLOCK AND RADIO) 2. VOLUME DOWN 3. VOLUME UP 4. CD DRAWER 5. REMOTE SENSOR 6. POWER ON INDICATOR 7. POWER/ ALARM OFF BUTTON 8. CD DRAWER OPEN/CLOSE BUTTON 9. LCD DISPLAY B (FOR TIMER) 10. MINTUE SET BUTTON (FOR TIMER) 11. HOUR SET BUTTON (FOR TIMER) 12...

Under Cabinet Mounting Instructions z Tools Required z Drill and 1/4” Drill Bit z Ruler or Tape Measure z Nail or Awl z Scissors z Screwdriver – Phillips z Countersink (Optional) z Masking Tape z Safety Glasses

1 – Mounting template Parts Packed with your unit 1. Spacers (3pcs of 1/4” , 3pcs of 1/2”, 3pcs of 1”) 2. Washers (3pcs) 3. Phillips head screws (3pcs of 2 3/4 ”, 3pcs of 1 5/8 ”) 4. Mounting Template Before Mounting Empty contest of the selected cabinet under which the unit will be mounted and thor...

Mounting Procedure Step 1. If your cabinet does not have a overhang: a) Position template in desired location on underside of cabinet, flush with front edge. b) Then tape template in pace and go to step 2. If your cabinet have overhang: a) Measure the thickness of the overhang. b) Fold front of the ...

Helpful Hints: On wooden cabinets you may want to mark and start the drill holes with a nail or an awl. Be sure to hold the drill very firmly against the cabinet to reduce “walking” of the drill bit from the markings. Using masking tape above the hole locations on inside of wooden cabinet shelf to h...

FULL LCD DISPLAY UNIT POWER SUPPLY ( Mains 120V/60Hz) Connect the power cable plug to the (120V) wall outlet. Warning: Before using the unit. Check that the local mains supply is compatible with the HI-FI System (120V 60Hz) Do not plug or unplug the power cable when your hands wet. When planning not...

CLOCK SETTING 1. While in the CD or Radio mode, Press “Display/AL.Set” two time to enter the time mode. 2. Press and hold MEMORY/C- ADJ button for 2 seconds, enter to hour adjustment mode( Hour will begin to flash) 3. Press SKIP >>| or SKIP |<< button to desired time. (e.g. 10:27pm ->...

ALARM TIME SETTING 1. While in the CD or Radio mode, Press “Display/AL.Set” one time to enter the alarm time set mode. (The bell icon “ ” will appear and begin to flash) 2. Press and hold MEMORY/C- ADJ button for 2 seconds, enter to alarm hour adjustment mode (Alarm hour will begin to flash) 3. Pres...

TO WAKE UP TO CD: a. Power on the unit by pressing the Power/AL. off button. b. Open the CD DRAWER and insert a CD (with the label side facing up) into the CD compartment. c. Close the CD DRAWER. d. Power off the unit by pressing the Power/AL. off button. e. Press AL.SET KEY (on the remote controlle...

TIMER FUNCTION (0:01 --------19:59) 1. Continue press the HOUR SET button (T/HOUR) adjust the hour of the time. (from 19: --to 0: --) 2. Continue press the MINUTE SET button (T/MIN) adjust the minute of the time. (from --:59 to -- : 00) 3. When the count-down time reach to zero, the system will alar...

RADIO SECTION RADIO RECEPTION NOTE: In Radio operation mode, press Display/AL.Set button to display the clock time. 1. Press Power/AL. off button to turn on the unit. 2. Press RADIO button to select radio. 3. Select AM/FM band by pressing the STOP/BAND button. AM and FM are alternately selected each...

OPERATION OF CD PLAYER Power ON in CD mode and indicate the total tracks which contain in the disc If open the CD DRAWER or there is no disc inside the unit , “00” display will be indicated on the display. PLAYING A CD 1. Turn on the unit by pressing the POWER/ AL. OFF button 2. Press CD button to s...