Sunbeam SR7001 - Manuals

Using the shot of steam The shot of steam can be used when dry or steam ironing, when the temperature is set above the two dot (••) setting.1. Ensure the tank is at least 1/4 full of water. 2. Select the desired temperature and wait until the temperature alert light illuminates green. 3. Squeeze the...

After each use 1. Turn the power off and remove the plug from the power outlet. 2. Allow the iron to cool before winding the cord around the built-in cord wrap. Storage Always store the iron on its heel rest.Do not store the iron with the soleplate facing down, or in the carton. Cleaning To clean th...

Tip # 27 - Iron shirts like a pro Start with the collar, working from the outer edges into the middle. Iron the shoulder next, followed by the cuffs and sleeves. Place the collar at the narrow end of the board so that one front panel of the shirt is extended flat. Iron the front panel from shoulder ...

Ironing Chart 10 TEMPERATURE SETTING FABRIC IRONING RECOMMENDATION minimum Acrylic Dry iron on wrong side. Acetate Dry iron on wrong side while still damp or use spray to dampen. Nylon Iron on wrong side while still damp or use spray to dampen. synthetic Polyester & Rayon Iron on wrong side of f...