Sunbeam SR6650 - User Manual

Page 2 - Contents

Sunbeam’s Safety Precautions 3 Features of your Verve Iron 4 Using your Verve Iron 6 The Safety Auto-Off Feature 7 Care and Cleaning of your Verve Iron 8 Ironing Tips & Tricks 9 Ironing Chart 10 Contents Important instructions – retain for future use.

Page 3 - Sunbeam’s Safety Precautions

3 Sunbeam’s Safety Precautions Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appl...

Page 6 - Using your Sunbeam Verve Iron

Before first use Remove any adhesive stickers, plastic covers or cardboard sleeves from the soleplate.Ensure that all adhesive is removed by rubbing the soleplate with a cloth dampened with methylated spirits.Fill the water tank and empty the water. This will rinse out any foreign particles remainin...

Page 7 - The safety auto-off feature

Dry ironing Follow steps 1 and 2 above.3. Select DRY on the steam dial. This will cut off the steam flow if there is water in the tank. Using the shot of steam The shot of steam can be used when dry or steam ironing, when the temperature dial is set to any temperature within the steam band or above ...

Page 8 - Care and Cleaning

After each use 1. Turn the power off and remove the plug from the power outlet. 2. Allow the iron to cool before winding the cord around the built-in cord wrap. Storage Always store the iron on its heel rest.Do not store the iron with the soleplate facing down, or in the carton. Cleaning To clean th...

Page 9 - Ironing Tips and Tricks

Tip # 27 - Iron shirts like a pro Start with the collar, working from the outer edges into the middle. Iron the shoulder next, followed by the cuffs and sleeves. Place the collar at the narrow end of the board so that one front panel of the shirt is extended flat. Iron the front panel from shoulder ...

Page 10 - Ironing Chart

Ironing Chart Fabric Temp setting Ironing Ironing recommendation Acrylic MINIMUM Min to • Dry iron on reverse side of fabric Acetate MINIMUM Min to • Dry iron on reverse side of fabric while still damp Nylon MINIMUM Min to • Iron on reverse side of fabric Polyester SYNTHETIC • Iron on reverse side o...

Page 11 - Year Replacement Guarantee

Should you experience any difficulties with your appliance, please phone our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. Alternatively, you can send a written claim to Sunbeam at the address listed below. On receipt of your claim, Sunbeam will seek ...