Sunbeam Semi-Automatic Blood Pressure Monitor with Memory - Manuals

Why Monitor Your Blood Pressure at Home? Many people experience “White Coat Syndrome”, which is a temporary elevation of bloodpressure during a visit at their physician’s office. Although only temporary, it can cause bloodpressure to rise and give a false indication of a person’s true blood pressure...

Blood pressure is measured in millimeters (mm) of mercury (Hg) and is generally recordedwith the systolic pressure (120) listed first and the diastolic pressure (80) listed second. Thenumbers are typically separated by a slash mark (/) as shown. Both pressure readings, the SYSTOLIC and DIASTOLIC, ar...

Variations in Blood Pressure Blood pressure is influenced by many factors and can change from moment to moment.Normally, blood pressure is lowest during sleeping periods and rises during the day. Thegraph below represents variations in blood pressure shown over a day with measurementstaken every 5 m...

Battery Installation/Replacement 1) Remove the battery cover as shown, Fig. 1. 2) Insert or replace 4 “AA” batteries into the compartment, matchingthe indicated polarity symbols. 3) To close, match up and connect the bottom hooks of the cover,then push the top end. Note: Replace the batteries when t...

Applying Your Blood Pressure Cuff Avoid smoking, eating, taking medication, alcohol consumption or physical activity 30 min-utes prior to taking a reading. If you are exhibiting signs of stress, avoid taking your meas-urement until the feeling subsides. Rest 15 minutes prior to taking a reading. Not...

Taking Your Blood Pressure Reading Proceed only after reading the previous sections of this manual.Remember! Remain still; do not talk during the measurement. 1. Rest your elbow on a solid surface with your palm facing upward. Elevate your arm so that the cuff is at the same levelas your heart, Fig....

Recalling Measurements in Memory You can recall up to 60 measurements in memory to share with your physician or trainedhealthcare professional. 1. Press the MEMORY button. The last stored measurement will display. 2. Continue to press MEMORY to view the next previously stored measurement. Note: The ...

Description of Display Symbols Troubleshooting If any abnormality occurs during use, please check and correct the following: Condition Correction Display is blank when power is on. Check and correct the polarity of the installed batteries. Reinstall or replace batteries. Measurement incomplete or Re...