Sun Microsystems FC-100 - Manuals

Sun Microsystems FC-100 – Manual in PDF format online.

Manuals:

Manual

Manual Sun Microsystems FC-100

Summary

Page 3 - Regulatory Compliance Statements; FCC Class A Notice

Regulatory Compliance Statements iii Regulatory Compliance Statements Your Sun product is marked to indicate its compliance class: • Federal Communications Commission (FCC) — USA • Department of Communications (DOC) — Canada • Voluntary Control Council for Interference (VCCI) — Japan Please read the...

Page 5 - Safety Agency Compliance Statements

Safety Agency Compliance Statements v Safety Agency Compliance Statements Read this section before beginning any procedure. Thefollowing text provides safety precautions to follow wheninstalling a Sun Microsystems product. Safety Precautions For your protection, observe the following safety precauti...

Page 7 - Gehäuseabdeckung; Conformité aux normes de sécurité; Mesures de sécurité; Symboles

Safety Agency Compliance Statements vii Achtung – Nicht alle Netzkabel haben die gleichenNennwerte. Herkömmliche, im Haushalt verwendeteVerlängerungskabel besitzen keinenÜberlastungsschutz und sind daher fürComputersysteme nicht geeignet. Achtung – Ihr Sun-Gerät wird mit einem dreiadrigenNetzkabel f...

Page 8 - Normativas de seguridad

viii Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998 Modification du matériel Ne pas apporter de modification mécanique ou électrique aumatériel. Sun Microsystems n’est pas responsable de laconformité réglementaire d’un produit Sun qui a été modifié. Positionnement d’un prod...

Page 10 - Aviso de cumplimiento con requisitos de láser; GOST-R Certification Mark

x Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998 Precaución – Es peligroso hacer funcionar losproductos Sun sin la tapa superior colocada. El hechode no tener en cuenta esta precaución puedeocasionar daños personales o perjudicar elfuncionamiento del equipo. Aviso de cumpli...

Page 11 - Declaration of Conformity; EMC

xi Declaration of Conformity Compliance ID: HUB 1063 Product Name: Sun StorEdge FC-100 Hub This product has been tested and complies with; EMC European Union-EC This equipment complies with the following requirements of the EMC Directive 89/336/EEC EN55022 / CISPR22 (1985) Class A EN50082-1 IEC801-2...

Page 13 - Contents; Product Description

Contents xiii Contents Preface xv 1. Product Description 1-1 1.1 Sun StorEdge FC-100 Hub 1-1 1.2 GBIC 1-3 2. Installation 2-1 2.1 Inspecting the Hub 2-1 2.2 Rackmount Placement 2-1 2.3 Installing the Hub 2-2 2.3.1 Tools You Will Need 2-2 2.3.2 Preparing the Cabinet 2-2 2.3.3 Installing the Mounting ...

Page 14 - Installing a GBIC

xiv Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998 3.1 Installing a GBIC 3-1 3.2 Removing a GBIC 3-4 3.3 Removing a Hub 3-6 A. Specifications A-1

Page 15 - Preface; Using UNIX Commands; This document does not contain information on basic UNIX

xv Preface The Sun StorEdge FC-100 Hub Installation and Service Manual provides information oninstalling and servicing the Sun™ StorEdge™ FC-100 Hub. These instructions aredesigned for an experienced system administrator or trained service provider. Using UNIX Commands This document does not contain...

Page 16 - su

xvi Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998 Typographic Conventions Shell Prompts TABLE P-1 Typographic Conventions Typeface Meaning Examples AaBbCc123 The names of commands, files,and directories; on-screencomputer output Edit your .login file. Use ls -a to list all...

Page 17 - Related Documentation; The; web site enables you to access Sun technical documentation; Sun Welcomes Your Comments

Preface xvii Related Documentation Refer to the Sun StorEdge A5000 Disk Array Installation and Documentation Guide, partnumber 805-1903-xx, for a list of related documentation Sun Documentation on the Web The docs.sun.com sm web site enables you to access Sun technical documentation on the Web. You ...

Page 19 - Sun StorEdge FC-100 Hub; The following conditions will cause the bypass of a port:

1-1 C H A P T E R 1 Product Description This chapter describes the Sun StorEdge FC-100 Hub and Gigabit InterfaceConverters (GBICs). 1.1 Sun StorEdge FC-100 Hub The hub is a seven-port connection point for Fibre Channel Arbitrated Loops(FC-ALs). Ports are connected using GBICs. Each port receives ser...

Page 21 - GBIC

Chapter 1 Product Description 1-3 1.2 GBIC The GBIC is compliant with Fibre Channel FC-PH-2 physical layer option 100-M5-SN-I and the ANSI FC-AL standard. The full speed of the module is 1062.5 Mbits/second. The range of distances supported is 2 to 500 meters. Sun currently ships two types of GBICs:...

Page 23 - Installation; This chapter describes how to install the hub in a cabinet.; Inspecting the Hub; Inspect the hub for evidence of damage.; Rackmount Placement

2-1 C H A P T E R 2 Installation This chapter describes how to install the hub in a cabinet. 2.1 Inspecting the Hub 1. Unpack the hub. 2. Inspect the hub for evidence of damage. If damaged, keep all contents and packing materials for the carrier ’s agent toinspect. 3. Save the packing materials for ...

Page 24 - Installing the Hub; Tools You Will Need; Extend the antitilt bar; Installing the Mounting Tray in the Cabinet

2-2 Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998 2.3 Installing the Hub 2.3.1 Tools You Will Need You will need a #2 Phillips screwdriver. 2.3.2 Preparing the Cabinet Follow the instruction in your system or expansion cabinet documentation. Ifnecessary, be sure to: ■ Exte...

Page 25 - Caution –; Use only SAE 10-32 screws to secure the tray to the cabinet mounting; screws each for the left and right side.

Chapter 2 Installation 2-3 2. Install the tray in the cabinet ( FIGURE 2-1 ). FIGURE 2-1 Installing the Tray in the Cabinet Caution – Use only SAE 10-32 screws to secure the tray to the cabinet mounting rails. Using any other screw type will damage the cabinet mounting holes. a. In the front of the ...

Page 26 - Installing the Hub on the Mounting Tray; The first hub goes in position A the second goes in position B.; Note –; The front and rear mounting plastics are interchangeable.

2-4 Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998 2.3.4 Installing the Hub on the Mounting Tray 1. Determine on which side of the tray you are going to install the hub. The first hub goes in position A; the second goes in position B. 2. From the rear of the tray, slide the...

Page 27 - Installing GBICs and Fiber Optic Cables; Choose the hub port into which you will install the GBIC.; and; Forcing a GBIC into a port can damage the GBIC and/or port. Use

Chapter 2 Installation 2-5 2.3.5 Installing GBICs and Fiber Optic Cables 1. Choose the hub port into which you will install the GBIC. Although the ports in a hub are electrically equivalent, follow any configurationguidelines that may have accompanied the other hardware in your configuration. If you...

Page 28 - Connect the fiber optic cable to the GBIC.; Route the fiber optic cable to an initiator or target.; Connect the fiber optic cable to a GBIC in the initiator or target.; Refer to the documentation that came with the device.; Routing the Power Cord

2-6 Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998 ■ To insert a GBIC that has a bail, slide the GBIC into the available port with thebail in the unlocked (right) position. Once the GBIC is firmly seated in the port,move the bail left into the locked position. FIGURE 2-4 In...

Page 29 - left side of the cabinet.; Verifying the Configuration; Make sure that the Device Active LEDs are lit for active hub ports.; The Bypass LEDs for active ports should be off.

Chapter 2 Installation 2-7 1. Connect the female end of the power cord to the power receptacle at the rear of the hub ( FIGURE 1-1 on page 1-2). 2. Route the power cord down the right side and along the bottom of the cabinet. 3. Route the power cord up through the cutout to the power distribution un...

Page 30 - Reassembling the Cabinet; Replace or close the top front panel; If the Device Active LED for a GBIC is flashing, replace the GBIC.

2-8 Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998 2.3.8 Reassembling the Cabinet Follow the instructions in your system or expansion cabinet documentation. Ifnecessary, be sure to: ■ Replace or close the top front panel ■ Replace or close the rear panel ■ Push the antitilt...

Page 31 - Service

3-1 C H A P T E R 3 Service This chapter describes how to remove and install a GBIC. It also describes how toremove a hub. 3.1 Installing a GBIC 1. Choose the hub port into which you will install the GBIC. Although the ports in a hub are electrically equivalent, follow any configurationguidelines th...

Page 34 - Removing a GBIC; Disconnect the fiber optic cable from the GBIC (

3-4 Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998 3.2 Removing a GBIC 1. Disconnect the fiber optic cable from the GBIC ( FIGURE 3-3 or FIGURE 3-4 ). 2. Remove the GBIC. Sun currently ships two types of GBICs: one with a bailed locking mechanism andone without. ■ To remove...

Page 36 - Removing a Hub; Disconnect and remove any installed fiber optic cables or GBICs (; Pull the hub back and then lift it out of the mounting slots.

3-6 Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998 3.3 Removing a Hub 1. Disconnect and remove any installed fiber optic cables or GBICs ( FIGURE 3-3 ). 2. Disconnect the AC power cord from the hub. 3. Push up on the retaining tab that secures the hub to the mounting tray (...

Page 37 - Specifications; Physical

A-1 A P P E N D I X A Specifications A.1 Physical TABLE A-1 Physical Specifications Height Width Depth Weight 1.69 in 8.6 in 14.35 in 6 lbs 42.92 mm 218.4 mm 364.49 mm 2.72 kg