Sterling SSV-052R - Manuals

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 6 of 36 1-2 Explanations and Information Various terms and designations are used frequently in these operating instructions to ensure clarity. Therefore, please note that the terms used in the text are defined as follows: • Equ...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 7of 36 1-3 For Your Safety How to Use This Manual • Please read this manual carefully before initial operation. Understanding the instructions and equipment will help to avoid injuries as well as damage to equipment. If you hav...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 8 of 36 • Check all lines, hoses, and coupling pieces regularly for leakage and damage. Any errors must be eliminated immediately. • The unit may only be used if all corresponding components have been properly connected and are...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 9 of 36 1-4 Unit Safety • The unit may ONLY be used for conveying cylindrical plastic granules and regrind on injection molding machines. • NEVER change the settings unless you are able to foresee the consequences. • Use ONLY o...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 10of 36 Chapter 2: Installation » These installation instructions are intended for people with skills in electrical and mechanical areas due to their training, experience and received instructions. Personnel using these install...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 11 of 36 2-1 General Information Unpack all parts of the single conveyor unit and make sure that every thing is available: • conveyor hopper with level sensor (1) • control and maintenance unit (2) • one venturi assembly (3) • ...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 12 of 36 2-2 Installing the Conveyor Hopper The single conveyor unit is insensitive to shocks and can be installed directly on the processing machine. Make sure that all connections are tight so that the conveying performance i...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 13 of 36 2-3 Installing the Control and Maintenance Unit Install the control and maintenance unit at a freely accessible site. Check the length of the connection cable and the length of the supplied hoses to the venturi assembl...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 14 of 36 2-4 Connecting the Compressed Air Supply Before connecting the compressed air supply, check the following: Check compressed air piping for correct installation and assembly. Check the fittings, length and quality of th...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 15 of 36 2-5 Electrical Connection The operating voltage is 110 V, AC, PE, 50/60 Hz. Special voltages available by request. The connected load is approximately 15 W. The connection is made using a mains connector. A separate pr...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 16of 36 Chapter 3: Functional Description 3-1 Method of Functioning The single conveyor unit works according to the Venturi Principle. An external compressed air supply is needed. A venturi meter (A) is integrated in the ventur...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 17 of 36 3-2 Control and Maintenance Unit A. The unit is switched ON and OFF at the control and maintenance unit. B. At the regulator, the operating pressure is adjusted. A water separator is integrated. C. Regularly inspect th...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 18of 36 This chapter is intended for the operating personnel of the equipment. General knowledge of operating conveyor units is required. The functional description must be read and understood. Make sure that in each case the o...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 19 of 36 4-3 Basic Setting of the Filling Level in the Conveyor Hopper The filling level in the conveyor hopper is mainly determined by the level sensor. Figure 6: Conveyor Hopper Filling Level Too Low 1. Using a screwdriver, t...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 20 of 36 Fine Adjustment of the Filling Level in the Conveyor Hopper During operation, use a screwdriver to carefully turn the adjustment screw (A) of the level sensor until the desired filling level is reached. If the filling ...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 21of 36 Chapter 5: Maintenance This chapter is intended for persons with skills in electrical and mechanical areas due to their training and experience. Personnel using the information in this chapter must be educated about acc...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 22 of 36 5-1 Maintenance Intervals Check the setting of the pressure regulator. Empty the water separator. Daily: Check danger signs on the unit for legibility and completeness. Clean the cartridge filter and screen (depending ...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 23 of 36 5-2 Cleaning/Replacing the Filter Cartridge Switch the unit OFF . Disconnect the main electrical plug. Figure 8: XSV-05/R Figure 7: XSV-05

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 24 of 36 Disassembly 1. Remove the filter cartridge (A). 2. Blow out the filter cartridge (A) from the inside out using compressed air or replace the filter. 3. Open the toggle-type fastener (B) and fold the hopper lid upward (...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 27of 36 Chapter 6: Technical Data Maximum througput: 330 lbs/h (149.7 kg/hr) Weight: Approx. 6.61 lbs. (3 kg) Operating voltage: 110 V, AC, PE, 50/60 Hz (standard) Special voltage on request Connected load: Approx. 15 W Total n...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 28 of 36 6-1 Dimension Sheet XSV-05

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 31 of 36 6-2 Spare Parts Lists XSV-05

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 34 of 36 Spare Parts List (See figures on previous pages for parts location) Position ID Number Designation 1 CT98171 Filter cartridge 2 CT18491 Screen (XSV-05 only) 2 CT29252 Screen (XSV-05R or XSV-05/2R) 3 CT31160 Lid gasket ...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 35 of 36 6-3 Quick Start Guide –XSV Venturi Loader Unpack all parts. Check for the following: • Conveying hopper with level sensor • Control and maintenance unit • Venturi assembly • Vinyl flexible hose • Compressed air hose • ...

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 36 of 36 6-4 Technical Assistance Parts Department Call toll-free 7am–5pm CST [800] 423-3183 or call [630] 595-1060, Fax [630] 475-7005 The ACS Customer Service Group will provide your company with genuine OEM quality parts man...