StarTech.com SV431H - Manuals

5 • For notebook computers: In most cases, all you need is one PS/2male-to-male cable connected between the SV431H and yourNotebook; the Y-adapter is not necessary. However, some Notebookcomputers do not follow industry-standard, please check yourNotebook user’s manual for details. You can now turn ...

6 Note: Computers using a USB keyboard and mouse are notimmediately operable when selected during during Auto Scan. Waitfor about three seconds after switching to a USB computer, then usethe keyboard and mouse. Hot Key Commands Hot Key commands are short keyboard sequences used to select acomputer, ...

7 • To adjust the Scan Rate which sets the duration before switching tothe next computer in Auto Scan: Left Ctrl + Left Ctrl + F3 The SV431H sends one to four beeps indicating scan intervals of 3,8, 15 and 30 seconds respectively. • To adjust keyboard typematic rate (characters/sec), this settingove...

8 Appendices Specifications Specification SV431H No. of computers supported 4 Front panel push button 4 Hot plug-and-play Automatic scan interval Automatic scan interval 3, 8, 15, 30 seconds Cable Length (Max) 30M (100ft) for VGA 5M (15ft) for USB 30M (90ft) for PS/2 Computer Online LED 4 Computer S...

9 Troubleshooting Ensure that all cables are well seated. Label the cable for eachcomputer to avoid confusion when connected to the SV431H. Key Possible causes Solutions Keyboard or mousedoes not work • In Auto Scan,computers usingUSB keyboard andmouse are notoperable.• Too manykeyboard or mousedriv...