StarTech.com PEXESAT32 - Manuals

3 Installation WARNING! PCI Express cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your PCI Express card. StarTech.com recommends that you wear an anti-static strap when installin...

4 6. Insert the power cable into the socket on the power supply and reconnect all other connectors removed in Step 1. Driver Installation Windows XP/Server 2003/Vista/Server 2008 R21. After installing the card into the computer system, boot up the computer. 2. Once logged into Windows, the Hardware/...

5 Verifying Installation Windows XP/Server 2003/Vista/Server 2008 R2/7From the main desktop, right-click on “My Computer” (“Computer” in Vista or later), then select “Manage”. In the new Computer Management window, select Device Manager from the left window panel. Under the “SCSI and RAID Controller...

6 How to Use RAID Configuration To setup a RAID array using the drives connected to the SATA controller card, the BIOS level configuration menu must be accessed. To access the configuration menu, during POST (computer startup), the status display for the controller card will display. When prompted, ...

7 Specifications Bus Interface PCI Express rev 2.0* (x1 connector) SATA rev 3.0 Connectors 2 x 7-pin eSATA (PEXESAT32) 2 x 7-pin SATA (PEXSAT32) Chipset ID Marvell 9128 Maximum Data Transfer Rate SATA: 6Gbps RAID Support 0, 1, JBOD (single) Operating Temperature 5°C ~ 50°C (41°F ~ 122°F) Storage Tem...