StarTech.com ESY1525L - Manuals

1-2 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e mouse and an on screen keyboard to take the place of an external keyboard. The Touchcomputer provides the following options. Operating System A selection of operating systems can be made between Windows CE.Net Ver4.2, Windows XP P...

1-3 External Connections and Upgrades The following drawing shows the Touchcomputer External connector panel. This panel of connectors is used by the user to make external connections to the Touchcomputer. No external connections, other than power, are needed for the Touchcomputer to operate. Extern...

1-4 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Keyboard • A keyboard can be added using the keyboard port. Upgrades and Changes A laptop type hard drive (2.5") can be added internally to the CE version of the Touchcomputer. • SDRAM can be increased from the standard 256 M ...

1-6 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Models The Touchcomputer is available in the following models. A key at the end of the model list explains the options. E08919-000 ESY1525L-7UWA-1-CE F00839-000 ESY1525L-7UWA-1-CE-C1C63175-000 ESY1525L-8UWA-1-CE E73369-000 ESY1525...

2-9 C H A P T E R C HAPTER 2 Touchcomputer S ETUP Initial Turn On and Software Registration Touchcomputer Operating System Setup The initial setup of the Windows operating system takes approximately 5-10 minutes. Additional time may be needed depending on computers hardware configuration and connect...

2-10 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Computer Reboots • Wait for computer to reboot and finally boot up to the desktop. Testing Pre-installed Devices Touchcomputer come pre installed with several different hardware options. To test these options, click on the follow...

2-12 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Technical Assistance There are three methods to obtain contact information for technical assistance on the Touchcomputer. • Touchcomputer itself• the Web• telephoneThese methods are described below. Using the Touchcomputer You ca...

3-13 C H A P T E R C HAPTER 3 S AFETY /S ERVICING THE Touchcomputer When servicing the computer perform the following:• Perform an orderly shutdown using the operating system menu.• Shut down the Touchcomputer and remove all external cables.• When opening the Touchcomputer, periodically touch any me...

4-15 C H A P T E R C HAPTER 4 T ECHNICAL D ESCRIPTION Block Diagram The block diagram of the Touchcomputer is shown below: LCD Inveter Speakers OSD Switch panel Optional Hard Drive Optional Compact Flash USB1 USB2 CN13 CN14 J16 J17 J12 J15 CN10 J11 CN11 J7 CN5 Optional MSR Optional Customer Display ...

MEMORY PC133/SDR BOOT ROM REALTEK RTL8100C FAST ETHERNET CONTROLLER VIA VT82C686B SOUTHBRIDGE PERIPHERAL CONTROLLER SOUND KEYBOARD MOUSE HARD DRIVE 2 SERIAL PORTS 4 USB PORTS WINDBOND W83977F I/O CONTROLLER TI PCI1410 PC CARD CONTROLLER 2 SERIAL PORTS PCMCIA FAST ETHERNET VIA VT8606 TWISTER NORTHBRI...

The connectors on mother board allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on mother board and their respective functions. Connector Locations on Mother Board Connectors on Mother Board CN1, CN...

Computer Specifications Processor • VIA Eden 600MHz low power CPU or equivalent Memory • RAM- 256 MB expandable to 512 MB Green Function • APM 1.2 compliant Audio Function • Stereo one watt capability per channel Operating System • Support for WinCE.Net Ver4.2• Support for Windows 2000 Pro• Support ...

4-23 • One Compact Flash Socket (CN5)• One hard drive socket located on the bottom of the board (J7) Real Time Clock • Battery backed up real time clock that features a multi-century calendar.• Lithium battery with socket.• On Screen Display • Volume Control • Backlight Brightness Windows CE .Net Ve...

4-24 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Display The LCD display consists of an LCD, inverter, and OSD switch module. The performance of the LCD display will be: Display Size 15.0 diagonal Native Resolution 1024 x 768 pixels Display Color Number 16.2 million Colors, 6 B...

4-25 TABLE 1. Chromaticity Values Touchscreen Assembly The touchscreen assembly consists of a touchscreen and a controller. AccuTouch or IntelliTouch touchscreens will be provided as options and use one of the USB ports on the mother board . External 12 VDC Power Supply The Touchcomputer shall be po...

4-26 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Customer Display The Customer Display is a twenty character two line vacuum fluorescent display (VFD). It consists of a VFD and VFD controller. There is a serial version controller and a USB controller. The actual VFD is common t...

4-27 Specifications Reference Standards Conform to applicable standards International Standards Organization, American National Standards Institute, California Drivers License, American Association of Motor Vehicle Administrators Power Input From USB port Message Format ACCII Card Speed 3 to 50 IPS ...

5-29 C H A P T E R C HAPTER 5 Touchcomputer C OMPONENT L AYOUT The figures below show the complete Touchcomputer identifying the major components discussed in Chapter 1.

5-30 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Touchcomputer Assembly

6-33 C H A P T E R C HAPTER 6 C OMPONENTS External 12 VDC Power Supply The Touchcomputer is powered by 12 VDC from a universal type power supply brick. The power supply shall provide the following capability:• Input voltage 85 to 263 vac• Input frequency 47 to 63 hz• Output voltage 12 vdc• Output li...

6-34 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Cables External Cables The following cables will be included: • US power cable for the external power supply• European power cable for the external power supply• Power cable from the 12 VDC external supply to the Touchcomputer. A...

7-35 C H A P T E R C HAPTER 7 E NVIRONMENTAL R EQUIREMENTS Temperature Ranges Humidity Altitude Operating Temperature (Independent of altitude) 0° to 40° Non-Operating Temperature (Independent of altitude) -30° to 60° Operating (non-condensing) 20% to 80% Non-Operating ( 38.7 ° C max. wet bulb tempe...

37 C HAPTER 0 R EGULATORY I NFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper...

41 C HAPTER 0 W ARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the touchcomputer and components of the product is 1 year.Seller makes no warr...

I n d e x - 4 3 A About the Product, 1Accessory Kit, 4Altitude, 35 Audio Function, 22 B Block Diagram, 15 C Cables, 28CD/DVD Drives, 3Chromaticity, 18Computer Reboots, 10Computer Specifications, 22 Controls, 10Customer Display, 2, 2 6 Customer Display Testing, 10 D Display, 24 Display Color Number, ...