Stamina VG1500 - Manuals - manualsarea.com

Page 3 - THANK YOU FOR PURCHASING THE; Leverage System; CALL US FIRST

THANK YOU FOR PURCHASING THE VIPER VG1500 TM Leverage System 3 Should you have any questions, please call our Customer Service Department toll-free number, 1 (800) 375-7520 Monday - Thursday, 7:30 A.M. - 5:00 P.M. Central Time. Friday, 8:00 A.M. - 3:00 P.M., Central Time. TELEPHONE CUSTOMER SERVICE ...

Page 4 - BEFORE YOU BEGIN; Thank you for choosing the; We take great pride in producing this quality; provides a convenient and simple method; please do not return the product. Contact; 00 lbs Weight Limit Notice Decal

4 Lat Bar Cable Back Cushion Foam Roller Leg Lift Left Handlebar Lever Arm Foam Roller Ankle Cuff Base Frame Seat Cushion Upright Long Chain THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY : Straight BarHandle Left Leverage Arm Lower Upright BEFORE YOU BEGIN Thank you for choosing the VG1500 TM Levera...

Page 5 - H A RDWA R E I D E N T I F I C AT I O N C H A RT; INCHES

5 Part No. and Description Qty H A RDWA R E I D E N T I F I C AT I O N C H A RT This chart is provided to help identify the hardware used in the assembly process. Place the washers, theend of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check thelengt...

Page 6 - ASSEMBLY INSTRUCTIONS; BUTTON HEAD BOLTS; FRONT

ASSEMBLY INSTRUCTIONS 6 Place all parts from the box in a cleared area and position them on the floor in front of you. Remove allpacking materials from your area and place them back into the box. Do not dispose of the packing materialsuntil assembly is completed. Read each step carefully before begi...

Page 7 - HEX

ASSEMBLY INSTRUCTIONS 7 STEP 3 Attach the LOWER UPRIGHT(6) to the BASE FRAME(1) with the SUPPORT BRACKET(5), HEX BOLTS (M12x1.75x70mm)(72), WASHERS(M12)(80), and NYLOCK NUTS(M12x1.75)(82). Do not tighten the bolts. Attach the LOW UPRIGHT(6) to the REAR STABILIZER(2) with HEX BOLTS(M12x1.75x70mm)(72)...

Page 8 - SMALL BALL END; HEX BOLT

ASSEMBLY INSTRUCTIONS 8 STEP 6: Run the SMALL BALL END of the CABLE(45) through the slot at the top end of the UPRIGHT(7). Attach the CABLE(45) to the UPRIGHT(7) at "A" with the LARGE PULLEY(44), a HEX BOLT (M10x1.5x95mm)(70), two WASHERS(M10)(81), and a NYLOCK NUT(M10x1.5)(83). Run the CABL...

Page 11 - HEX BOLTS

ASSEMBLY INSTRUCTIONS 11 STEP 16 Attach the FOAM SUPPORTS(15) to both sides of the LOWER UPRIGHT(6) with HEX BOLTS (M12x1.75x100mm)(75), WASHERS(M12)(80), and NYLOCK NUTS(M12x1.75)(82). STEP 17 Attach the HEAD REST(35) and BACK CUSHION(36) to the BACK SUPPORT(12) with HEX BOLTS (M10x1.5x25mm)(67) an...

Page 13 - LEG

ASSEMBLY INSTRUCTIONS STEP 22 Slide a FOAM ROLLER(39) onto a SUPPORT TUBE(38) and screw a SECURING CAP(41) onto the end of the SUPPORT TUBE(38). Insert the other end of the SUPPORT TUBE(38) through the hole in the LEG LIFT(10). Slide another FOAM ROLLER(39) over the protruding end of the SUPPORT TUB...

Page 14 - SETTING UP THE ACCESSORIES; SHORT

SETTING UP THE ACCESSORIES 14 STRAIGHT BAR HANDLE(51), ANKLE CUFF(53) The STRAIGHT BAR HANDLE(51) and ANKLE CUFF(53) can be attached to the ball end of the CABLE(45) at the bottom of the LEG LIFT(10) with two QUICK LINKS(47) and one of the CHAINS(55, 56). LAT BAR(49) Attach the LAT BAR(49) to the CA...

Page 16 - gently; pull the upper

16 WARM-UP and COOL-DOWN Warm-up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise yourheart rate and warm the working muscles. Activities may include ...

Page 17 - THIS WARRANTY SHALL NOT; or call us at; IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED; In the event that the purchaser makes any claim under this; SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF

17 WARRANTY LIMITED WARRANTY MODEL 50-3000 Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanshipunder normal use, service and proper operation for a period of 90 days on the parts and three years on theframe from the date of the original purchase fr...

Page 18 - PRODUCT PARTS DRAWING

Page 21 - NOTES

Page 22 - FAX/MAIL ORDERING FORM; Our Customer Service; DESCRIPTION

IMPORTANT : Before filling out the form below make sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 IMPORTANT : We must have your phone numb...