Stamina UX2 - Manuals

Stamina UX2 – Manual in PDF format online.

Manuals:

Manual

Manual Stamina UX2

Summary

Page 2 - TABLE OF CONTENTS; Page; SAFETY PRECAUTIONS; READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

TABLE OF CONTENTS Safety Precautions 2 Before You Begin 4 Hardware Illustrations 5 Assembly Instructions 6 Set Up Instructions 10 Operational Instructions 11 Storage 14 Maintenance 14 Adjustment Instructions 15 Conditioning Guidelines 17 Warm-up and Cool-Down 18 Warranty 19 Product Parts Drawing 20 ...

Page 3 - CALL US FIRST

THANK YOU FOR PURCHASING THE STAMINA UX2 AIR BIKE To help you get started, we have pre-assembled most of your UX2 AIR BIKE at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual. With regular w...

Page 4 - BEFORE YOU BEGIN; Thank you for choosing the

BEFORE YOU BEGIN THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY : Right Handlebar Fan Cage Leveling Cap Right Linkage Pedal Crank Right Chain Guard Rear Support Endcap Main Frame Bellows Seat Left Handlabar 4 Tension Knob Monitor Foam Grip Foam Grip Lower Bar Meter Post Wrench Multi-opening Wrench Al...

Page 5 - H A RDWA R E I D E N T I F I C AT I O N C H A RT; INCHES

Part No. and Description Qty 38 Bushing Washer ( ø 16.3 x ø 25 x 0.5t) 2 39 Large Washer (M8) 2 67 Washer (M8 x ø 16mm x 1.5mm) 3 68 Washer (M8 x ø 22mm x 1.5mm) 2 35 Thin Nut (1/2"-20) 2 51 Carriage Bolt (M8 x 1.25 x 38mm) 2 59 Bolt, Round Head (M6 x 1 x 12mm) 4 62 Nylock Nut (M8 x 1.25) 7 64 A...

Page 6 - ASSEMBLY INSTRUCTIONS; ROUND HEAD SCREWS

ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove allpacking materials from your area and place them back into the box. Do not dispose of the packing materialsuntil assembly is completed. Read each step carefully before beginn...

Page 7 - MONITOR

ASSEMBLY INSTRUCTIONS STEP 4 Attach the SEAT(43) to the SEAT POST(4) with NYLOCK NUTS(M8x1.25)(62) and WASHERS(M8)(67). Slide BELLOWS(45) over the SEAT POST(4). Insert the SEAT POST(4) into the MAIN FRAME(1) and lock in position with LOCKING KNOB(46). 7 Strap There is a strap attached inside of the ...

Page 10 - SET UP INSTRUCTIONS; Equipment Mat

FUNCTION INSPECTION: Visually inspect the UX2 AIR BIKE to verify that assembly is as shown in the above illustration. Check the function of the UX2 AIR BIKE. Turn the crank slowly through one complete revolution to verify that the drive chain functions properly. Adjust the TENSION KNOB(27) and verif...

Page 11 - USING THE MONITOR; HOW TO INSTALL AND REPLACE BATTERIES:; CALORIES; OPERATIONAL INSTRUCTIONS

USING THE MONITOR Open the Battery Door on the back of the monitor.The monitor operates with two AA batteries, two batteries included.Refer to the illustration to install or replace the batteries. 1.2. Do not mix a new battery with an old battery.Use the same type of battery. Do not mix an alkaline ...

Page 13 - UX2 AIR BIKE; Stationary Handlebar; L I NK A G E

OPERATIONAL INSTRUCTIONS Exercise Workout The secret to aerobic training is achieving a selected heart rate and maintaining it. The UX2 AIR BIKE, with its air resistance system allows the user to easily attain the desired pulse rate. Since no two people or life styles are alike, the UX2 AIR BIKE has...

Page 15 - Chain Adjustment required if the Chain is too loose.; TAB; Fan Adjustment; FAN CAGES

ADJUSTMENT INSTRUCTIONS Chain Adjustment Chain Adjustment required if the Chain is too loose. Loosen the NUTS(3/8"-26)(66) on both sides of the fan. Adjust the NUT(M6x1)(65) on the chain side of bike to remove all slack from the chain.Adjust the NUT(M6x1)(65) on the side opposite the chain so th...

Page 16 - ADJUSTMENT INSTRUCTIONS

ADJUSTMENT INSTRUCTIONS Hold the FAN(18) so that the FRONT SPROCKET is on your left side as shown. Loosen NUTS "A" and "B" until at least 1/2" of FAN AXLE is showing between NUT "A" and the FAN BUSHING. Tighten NUT "C" completely until it bottoms out on the last F...

Page 17 - CONDITIONING GUIDELINES; Have your doctor review your training and diet programs.

17 CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive forseveral years or are severely overweight, start slowly and increase your workout time gradually. Increaseyour workout intensity gradually, too, by monitoring your heart rat...

Page 18 - gently; pull the upper

18 WARM-UP and COOL-DOWN Warm-up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise yourheart rate and warm the working muscles. Activities may include ...

Page 19 - THIS WARRANTY SHALL NOT; or call us at; IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED; In the event that the purchaser makes any claim under this; SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF; WARRANTY

Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanshipunder normal use, service and proper operation for a period of 90 days on the parts and one year on theframe from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL...

Page 20 - BACK

Page 21 - PARTS LIST; PART NAME

PARTS LIST DIAGRAM# PART NAME QTY 1 Main Frame 1 2 Rear Support 1 3 Front Stabilizer 1 4 Seat Post 1 5 Meter Post 1 6 Left Handlebar 1 7 Right Handlebar 1 8 Lower Bar 2 9 Left Linkage 1 10 Crank and Sprocket 1 11 Wavy Washer 1 12 Small Keyed Washer 2 13 Split Bearing 4 14 Crank Bearing Retainer 2 15...

Page 23 - FAX/MAIL ORDERING FORM; Our Customer Service; DESCRIPTION

IMPORTANT : Before filling out the form below make sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 IMPORTANT : We must have your phone numb...