Stamina 55-1527B - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS; Equipment Warning, Caution & Notice Labels; SAFETY INSTRUCTIONS; WARNING

TABLE OF CONTENTS Safety Instructions ...................................... 2 Before You Begin ........................................ 4 Equipment Warning, Caution & Notice Labels ... 5 Hardware Identification Chart .................... 6 Assembly Instructions ................................ ...

Page 3 - Call Us First; Customer Service; THANK YOU FOR PURCHASING THE; INVERSION TABLE; To enact your warranty, please register your product

3 Call Us First www.staminaproducts.com 1 (800) 375-7520 Customer Service THANK YOU FOR PURCHASING THE INVERSION TABLE To help you get started, we have pre-assembled most of your INVERSION TABLE at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follo...

Page 4 - BEFORE YOU BEGIN; the finest materials and uses the highest standards

BEFORE YOU BEGIN 4 T h a n k y o u f o r c h o o s i n g t h e I N V E R S I O N TABLE . We take great pride in producing this quality product and hope it will provide many hours of quality exercise to make you feel better, look better, and enjoy life to its fullest. It's a proven fact that a regula...

Page 5 - EQUIPMENT WARNING, CAUTION & NOTICE LABELS; Labels are larger than actual size; ATTACH THE INVERSION WARNING DECAL TO THE MAIN FRAME AT

This chart is provided to help identify the warning, caution, and notice labels on the INVERSION TABLE . Please take a moment to familiarize yourself with all of the warning, caution, and notice labels. EQUIPMENT WARNING, CAUTION & NOTICE LABELS WARNING LABEL(44) W1 5 Labels are larger than actu...

Page 6 - INCHES; check the length of the bolts and screws.; MILLIMETERS; HARDWARE IDENTIFICATION CHART

6 Part No. and Description Qty length length mm. in. INCHES This chart is provided to help identify the hardware used in the assembly process. Place the washers or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts a...

Page 7 - ASSEMBLY INSTRUCTIONS; BASE ASSEMBLY

7 ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before be...

Page 8 - Then secure the PIVOT ARMS(5) on the pegs with BUTTON HEAD BOLTS; PIVOT ARM ADJUSTMENT:; INVERSION

ASSEMBLY INSTRUCTIONS 8 SLOTS STEP 3 Slide the bottom of the two PIVOT ARMS(5) into the brackets located at each side of the MAIN FRAME(4). Align the desired hole on the arm with the peg on the bracket, and insert the peg into the hole to lock the PIVOT ARMS(5) in position. Then secure the PIVOT ARM...

Page 9 - HEEL HOLDER; The five holes in the

ASSEMBLY INSTRUCTIONS 9 STEP 5 Attach the FOOTREST(8) onto the HEIGHT ADJUSTMENT BEAM(6) with BOLTS(M8x1.25x50mm)(34), WASHERS(M8)(38), and NYLOCK NUTS(M8x1.25)(36). NOTE: STEP 6 Insert the PAD TUBE(9) through the hole on the HEIGHT ADJUSTMENT BEAM(6) and secure with BOLT(M6x1x45mm)(32) and NYLOCK N...

Page 10 - SET UP INSTRUCTIONS; BUCKLE; LARGE SPRING; until you have verified your height setting. Failure to use; HEIGHT

SET UP INSTRUCTIONS 10 1. 2. A. C. B. BUCKLE 3. STEP 9: Attach the end of the NYLON STRAP(25) to the hook on the back of the MAIN FRAME(4); attach the end of the BUCKLE STRAP(26) to the hook on the FRONT FRAME(1), as shown in Illustration 2. The NYLON STRAP(27) must be secured to the MAIN FRAME(4) a...

Page 11 - OPERATIONAL INSTRUCTIONS; THE HANDLEBARS

OPERATIONAL INSTRUCTIONS 11 THE HANDLEBARS For added convenience, and safety, a set of HANDLEBARS has been added to the INVERSION TABLE. These HANDLEBARS are located at the top of the REAR FRAME(2). The HANDLEBARS are to help you return to the upright position from any degree of inversion. If you wi...

Page 12 - USING THE INVERSION TABLE; Check the decline angle before using the; Not Past Vertical

OPERATIONAL INSTRUCTIONS USING THE INVERSION TABLE 12 1. Check the decline angle before using the INVERSION TABLE. To increase the decline, lengthen the straps. To decrease the decline, shorten the straps. WARNING: DO NOT ALLOW table to invert past vertical. Table inverting past vertical may result ...

Page 13 - Return upright slowly.; SUGGESTIONS FOR USE

OPERATIONAL INSTRUCTIONS 13 Start by lying fully back on the bed with your hands at your side, or resting on your thighs. Keeping your hands close to your body begin to raise your arms slowly allowing the table to rotate backward. Stop, or lower your arms to control the downward rotation of the tabl...

Page 14 - STORAGE; FOLDING THE INVERSION TABLE; BASE; MAINTENANCE

STORAGE 14 FOLDING THE INVERSION TABLE The INVERSION TABLE can be easily folded for storage. To fold the INVERSION TABLE loosen the LOCKING KNOB(17) and pull out the LARGE SPRING PIN(16). Now, slide the HEIGHT ADJUSTMENT BEAM(6) all the way up into the MAIN FRAME(4) until the ADJUSTABLE INSTEP FRAME...

Page 15 - LIMITED WARRANTY; WARRANTY; THIS WARRANTY SHALL

LIMITED WARRANTY WARRANTY Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship under normal use, service and proper operation for a period of 90 days on the parts and five years on the frame from the date of the original purchase from an authorized...

Page 16 - PRODUCT PARTS DRAWING; FRONT

Page 17 - PARTS LIST; PART NAME

PARTS LIST 17 PART# PART NAME QTY 1 Front Frame 1 2 Rear Frame 1 3 Folding Linkage 2 4 Main Frame 1 5 Pivot Arm 2 6 Height Adjustment Beam 1 7 Adjustable Instep Frame 1 8 Footrest 1 9 Pad Tube 1 10 Heel Holder Bracket 4 11 Heel Holder 4 12 Spring 1 13 Small Spring Pin 1 14 Scale Decal 1 15 Bushing 2...