Speed Queen AWN632SP116TW01 - Manuals

Page 3 - Table of Contents; Dimensions and Specifications

Table of Contents Dimensions and Specifications ................................................................ 4 Installation ............................................................................................. 5 Before You Start ..............................................................

Page 5 - Before You Start; Supplies; Figure 1; Parts Included; Connecting Hoses; Order of Installation Steps

Installation Before You Start Supplies For most installations, the basic supplies you will need are: TLW2218N_SVG 3 4 5 6 7 2 1 NOTE: A cloth rag and all-purpose cleaner are alsoneeded. 1. Safety Glasses 2. Wood Block 3. Gloves 4. Wrench 5. Screwdriver 6. Pliers 7. Level Figure 1 NOTE: If the washer...

Page 6 - Figure 2; Wipe Out Inside of Washtub; Figure 3; Connect Fill Hoses; WARNING; Mixing Valve Flow Rates; Water Supply Requirements

Remove the Shipping Brace andShipping Plug 1. Remove the shipping brace from under the lid.2. The shipping plug will be released from the base of the wash- er when removing the cardboard base from the washer. The shipping brace and plug should be saved and must be rein-stalled whenever washer is mov...

Page 7 - Figure; Figure 4; Connect Drain Hose to Drain; Standpipe Installation

NOTE: Water supply faucets should be readily accessi-ble to permit turning them off when washer is not beingused. Recommended cold water temperature is 50° to 75° Fahrenheit[10° to 24° Celsius]. Recommended maximum hot water temper-ature is 125° Fahrenheit [51° Celsius]. Warm water is a mixtureof ho...

Page 8 - Low Standpipe Installation; Figure 6; Wall Installation; Figure 7

2. Install standpipe adapter onto drain hose only if standpipe di- ameter is 2 inches [51 mm] or less. 3. Place the drain hose into the standpipe. IMPORTANT: To prevent siphoning, do not placeany ribbed portion of the drain hose into the stand-pipe. 4. Remove the beaded strap from accessories bag an...

Page 9 - Laundry Tub Installation; Figure 8; Position and Level the Washer; Figure 9; Plug In the Washer; Electrical Requirements

Laundry Tub Installation For this type of installation, the drain hose MUST be secured tothe stationary tub to prevent hose from disloding during use. Usethe beaded strap (supplied in accessories bag) to secure hose. TLW2284N_SVG 1 1. Beaded Strap (tape if necessary) Figure 8 Position and Level the ...

Page 10 - Earth/Ground Instructions

WARNING To reduce the risk of fire, electric shock, serious in-jury or death, all wiring and protective earth/groundconnections MUST conform with the latest edition ofthe National Electrical Code, ANSI/NFPA No. 70, andsuch local regulations as might apply. It is the cus-tomer’s responsibility to hav...

Page 11 - • DO NOT modify the plug provided with the unit – if it will; Check Lid Switch; Refer to Installer Checklist on the back cover of this manual

led and connected to a protective earth/ground in accordance withall local codes and ordinances. WARNING Improper connection of the equipment earth/groundconductor can result in a risk of electric shock.Check with a qualified electrician or service person ifyou are in doubt as to whether the unit is...

Page 12 - Fast Track for Installing the Washer; Refer to the manual for more detailed information

Installer Checklist Fast Track for Installing the Washer 1 Remove the ShippingBrace and ShippingPlug. TLW2280N_SVG1 5 Position and Level theWasher. TLW2201N_SVG CHECK CHECK 2 Wipe Out Inside ofWashtub. TLW2281N_SVG1 6 Plug In the Washer. TLW2289N_SVG CHECK CHECK 3 Connect Fill Hoses. TLW1988N_SVG HO...

Speed Queen AWN632SP116TW01 - Manuals

Manuals:

User Manual Speed Queen AWN632SP116TW01

Installation Manual Speed Queen AWN632SP116TW01

Summary

Speed Queen Manuals