Spalding M8660411 - Manuals

Page 2 - WARNING; SAFETY INSTRUCTIONS; REQUIRED TOOLS AND MATERIALS:

2 ID# M866041 1 09/05 IMPORTANT! WRITE MODEL NUMBER FROM BOX ONTO PAGE 1 OF THIS OWNERS MANUAL Owner must ensure that all players know and follow these rules for safe operation of the system. WARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net. • Dur...

Page 3 - PARTS LIST

3 09/05 ID# M866041 1 Item Qty. Part No. Description 1 1 968860 Pole 2 1 998850 Plate, Anchor, Black 3 1 Rim Assembly 4 1 Net 5 4 203017 Nut, Hex, 3/8-16 6 4 203300 Washer, Locking, 3/8 7 2 250001 Bolt, Hex, Tap, 3/8-16 x 4” Long 8 2* 250002 Bolt, Hex, Tap, 3/8-16 x 2” Long 9 1 203457 Label, Logo, V...

Page 5 - Ensure ground is level with playing surface, then dig pole hole.

5 09/05 ID# M866041 1 Ensure ground is level with playing surface, then dig pole hole. Install threaded ends of J-bolts (19) through holesin mounting plate (2) and secure as shown. 2 25 25 25 19 19 Install nut (25) to J-bolt (19) asshown. Repeat procedure forremaining three J-bolts (19). 2.75” (7 cm...

Page 6 - SIDE VIEW; WAIT A MINIMUM OF 72 HOURS BEFORE GOING ON; Front of mounting plate

6 ID# M866041 1 09/05 Insert J-bolts (19) from mounting plate (2) into cement as shown. Move assembly around to releaseany air pockets in cement, then rest mounting plate on cement drainage hill. Apply some pressure tolevel mounting plate on top of drainage hill. Level mounting plate and square with...

Page 8 - SCRAP WOOD

8 ID# M866041 1 09/05 Rest top of pole (1) on a piece of scrap wood (not included) and line up holes in pole to holes inmounting plate (2) as shown. 7A. 22 28 1 PLAYING SURFACE 2 Insert bolt (28) through holes in plate and pole and secure with nut (22). 7B. PLAYING SURFACE SCRAP WOOD (NOT INCLUDED) ...

Page 9 - Completed Assembly; people are required to lift pole into; THIRD; While pole is being supported by; TWO; FIGURE

9 09/05 ID# M866041 1 THREE PEOPLEREQUIRED FOR THISPROCEDURE. FAILURETO FOLLOW THISWARNING COULD RESULTIN SERIOUS INJURYAND/OR PROPERTYDAMAGE. WARNING! 8. PL AY IN G SU RF AC E 26 24 35 37 36 14 Completed Assembly TWO people are required to lift pole into position so that the threaded assemblyrod (1...

Page 14 - Rim Assembly

14 ID# M866041 1 09/05 13. 5 8 Refer To Instructions Included With Rim Hardware For Rim Assembly. 3 Rim Assembly 6 10 7 IMPORTANT! Carefully cut and peelprotective film away fromboard prior to attaching rim. Before starting, tighten nut (26) until it is positioned 6-3/4” from theend of the rod (14) ...

Page 15 - Set-up For Right Side; NOTE ORIENTATION

15 09/05 ID# M866041 1 14. A. 15. Apply height indicatorlabels (32 & 31) to heightindicators (30). 2. 4. 3. 1. Install net (4) to rim as shown. 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 910 7 8 910 7 8 9 10 7 8 9 10 7 8 9 10 7...

Page 19 - What is Not Covered By This Warranty; RIM; LIMITED LIFETIME WARRANTY

19 09/05 ID# M866041 1 Subject to proper installation and normal use, Hydra-Rib ® warrants, subject to limitations below, to the original retail purchaser all structural components of the Hydra-Rib ® system to be free of defects in material and workmanship for the duration of ownership by the origin...