SOYO SY-5EHM - Manuals - manualsarea.com

Page 2 - NSTL “Year 2000 Test” Certification Letter

NSTL “Year 2000 Test” Certification Letter September 23, 1998 Testing Date: September 23, 1998 Certification Date: September 23, 1998 Certification Number: NCY2000-980923-004 To Whom It May Concern: We are please to inform you that the “SY-5EHM/5EH5” system has passed NSTL Year 2000 certification te...

Page 3 - Declaration of Conformity; EQUIPMENT: Main Board; SPORTON INTERNATIONAL INC.

Declaration of Conformity According to 47 CFR, Part 2 and 15 of the FCC Rules Declaration No.: D872907 July.10 1998 The following designated product EQUIPMENT: Main Board MODEL NO.: SY-5EH Which is the Class B digital device complies with 47 CFR Parts 2 and 15 of the FCC rules. Operation is subject ...

Page 4 - SOYO; FC

SOYO ™ SY-5EHM/5EH5 V1.3 i About This Guide This User's Guide is for assisting system manufacturers and end users in setting up and installing the Motherboard. Information in this guide has been carefully checked for reliability; however, no guarantee is given as to the correctness of the contents. ...

Page 5 - ii; Table of Contents; THE

Table of Contents SY-5EHM/5EH5 V1.3 ii Table of Contents SY-5EHM/5EH5 V1.3 MOTHERBOARD LAYOUT ............................... 1 CHAPTER 1 INTRODUCTION ........................................................... 2 1-1 KEY FEATURES ............................................................ 2 1-2 HAN...

Page 6 - Motherboard Features; ETEQ

Motherboard Features SY-5EHM/5EH5 V1.3 1 SY-5EHM/5EH5 V1.3 Motherboard Layout SY-5EHM/5EH5 V1.3 Platform Flash BIOS JP44 1 3 IR1 5 1 JP5 1 3 AGP Slot ISA Slot #1 ISA Slot #2 ISA Slot #3 IDE 1 IDE 2 PRT 1 COM 1 COM 2 FDC KB Connec tor PS/2 MouseConnector ATX Power AT Power 1 1 1 1 1 1 1 3 1 4 5 9 SIM...

Page 7 - Introduction; Chapter 1; INTRODUCTION; CPU; II; L2 Cache Controller

Introduction SY-5EHM/5EH5 V1.3 2 Chapter 1 INTRODUCTION The SY-5EHM/5EH5 V1.3 AGP/PCI Motherboard is a high-performance AT form-factor system board. SY-5EHM/5EH5 V1.3 uses the ETEQ82C663 AGP/PCI Chipset technology and supports Pentium ® class processors. This Motherboard is fully compatible with ind...

Page 10 - -2 HANDLING THE MOTHERBOARD; Do not apply power if the Motherboard appears; -3 ELECTROSTATIC DISCHARGE PRECAUTIONS

Introduction SY-5EHM/5EH5 V1.3 5 1-2 HANDLING THE MOTHERBOARD To avoid damage to your Motherboard, follow these simple rules while unpacking: Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. Remove the Motherboard from its anti-static p...

Page 11 - Hardware Setup; Chapter 2; HARDWARE SETUP

Hardware Setup SY-5EHM/5EH5 V1.3 6 Chapter 2 HARDWARE SETUP Congratulations on your purchase of SY-5EHM/5EH5 V1.3 Super 7 TM Motherboard. You are about to install and connect your new Motherboard. Note: Do not unpack the Motherboard from its protective anti-static packaging until you have made the f...

Page 12 - -2 Unpacking the Motherboard

Hardware Setup SY-5EHM/5EH5 V1.3 7 2-2 Unpacking the Motherboard When unpacking the Motherboard, check for the following items: The SY-5EHM/5EH5 V1.3 ETEQ82C663 PCI/AGP Motherboard The Quick Start Guide * The Installation CD-ROM * The CPU Retention Set One IDE Device Flat Cable One Floppy Disk Drive...

Page 13 - -3 Installation Guide; Step 1. CPU Installation; Follow these instructions to install your Pentium

Hardware Setup SY-5EHM/5EH5 V1.3 8 2-3 Installation Guide We will now begin the installation of the Motherboard. Please follow the step-by-step procedure designed to lead you to a complete and correct installation. Step 1. CPU Installation Follow these instructions to install your Pentium ® class pr...

Page 15 - Single or Dual

Hardware Setup SY-5EHM/5EH5 V1.3 10 Step 3. CPU Voltage Setting (SW2,JP1) Please verify the correct voltage with your dealer before installation. Use the following tables to set SW2 to the proper "Voltage Value", according to the specifications marked on your CPU: This Motherboard comes with...

Page 16 - Voltage Type

Hardware Setup SY-5EHM/5EH5 V1.3 11 CPU you are installing and adjust the settings on SW2 accordingly. This motherboard supports CPU core voltages from 2.0 to 3.5V in 0.1V increments. Use the following tables to set the CPU voltage jumpers SW2 to match the voltage value of your CPU: CPU Core Voltage...

Page 18 - Voltage Settings for Various Processors (continued); Please ask your dealer for the correct voltage.; Cyrix M; * Set the proper CPU voltage according to the marking on the CPU.

Hardware Setup SY-5EHM/5EH5 V1.3 13 Voltage Settings for Various Processors (continued) Processor Voltage Setting Voltage Value: SW2 JP1 AMD K6-2 450 AMD K6-2 475 AMD K6-2 500 AMD K6-III 400 AMD K6-III 450 Dual Voltage V ORE :2.4V V I/O :3.3V The AMD K6-2 and K6-III come in several versions with dif...

Page 21 - * Set the proper CPU frequency according to the marking on the CPU.

Hardware Setup SY-5EHM/5EH5 V1.3 16 Please refer to the following table that gives you the correct frequency settings for the specific brand and model of CPU you are installing on this Motherboard. Frequency Settings for Intel ® Processors Processor Frequency Setting Ratio Bus Clock AGP Clock PCI Cl...

Page 26 - CPU BUS

Hardware Setup SY-5EHM/5EH5 V1.3 21 Step 5. Set JP7,JP9,JP10 for SDRAM frequency JP7 is used to indicate the frequency of the CPU bus clock to the ETEQ chipset. JP9 and JP10 are used to determine that the SDRAM is running at the frequency of the CPU bus clock or the AGP clock. CPU BUS Clock AGP BUS ...

Page 27 - Step 6. DRAM Module Installation; Do not install EDO type of DIMM modules if you already; MEMORY CONFIGURATION

Hardware Setup SY-5EHM/5EH5 V1.3 22 Step 6. DRAM Module Installation This Motherboard supports two strips of 72-pin 5V FPM/EDO DRAM (SIMM) from 4 to 64 MB and two strips 168-pin 3.3V/5V Unbuffered DIMM modules from 8 to 256 MB. The Motherboard requires SIMM modules of at least 70ns access time. This...

Page 28 - Memory Configuration Table; Step 8. Floppy Drive Installation

Hardware Setup SY-5EHM/5EH5 V1.3 23 Your board comes with one SIMM Bank (2 modules) and two DIMM sockets, providing support for up to 512MB of main memory using DIMM modules from 8MB to 256MB. For 66MHz host bus CPUs use 12ns or faster DIMM modules; for 83MHz or higher host bus CPUs use 8ns modules....

Page 29 - Step 9. Front Panel Connections

Hardware Setup SY-5EHM/5EH5 V1.3 24 Step 9. Front Panel Connections Plug the computer case's front panel devices to the corresponding connectors on the Motherboard. 1. Power LED & KeyLock Plug the Power LED cable into the 5-pin Keylock connector. Some systems may feature a KeyLock function with ...

Page 30 - LED

Hardware Setup SY-5EHM/5EH5 V1.3 25 3. Speaker Attach the 4-pin PC speaker cable from the case to the Speaker connector on the Motherboard. 4. Turbo LED Connecting the 2-pin Turbo LED cable to the corresponding Turbo LED connector will cause the LED to light whenever the system is in Turbo mode. The...

Page 33 - Parallel Port PRT1; AT Keyboard

Hardware Setup SY-5EHM/5EH5 V1.3 28 Parallel Port PRT1 This parallel port is used to connect the printer or other parallel devices. Your Motherboard comes with one 25-pin female external parallel connector with 25-pin flat cable. Plug the 25-pin end of the flat cable into the PRT1 parallel connector...

Page 34 - Optional; ) to this header as shown in the diagram

Hardware Setup SY-5EHM/5EH5 V1.3 29 PS/2 Mouse Attach the mouse cable to the 6-pin male PS/2 mouse connector on the Motherboard to enable PS/2 mouse function. Universal Serial Bus (USB) This Motherboard provides a dual-row 10-pin header (one pin is empty) to support two USB ports for your additional...

Page 35 - JP44 Pin Assignment; GND; VCC; SIR Pin Assignment

Hardware Setup SY-5EHM/5EH5 V1.3 30 Step 11. Others Connector 1. Wake-On-LAN (WOL) Attach the 3-pin connector from the LAN card which supports the Wake-On-LAN (WOL) function to the JP44 connector on the Motherboard. This WOL function lets users wake up the connected computer through the LAN card. Pl...

Page 36 - Step 12. CPU Cooling Fan Installation; CPU Cooling Fan: JP12

Hardware Setup SY-5EHM/5EH5 V1.3 31 Step 12. CPU Cooling Fan Installation After you have seated the CPU cooling fan properly on the processor, attach the 3-pin fan cable to the JP12 connector on the Motherboard. To avoid damage to the system, install according to the following pin assignment: Step 1...

Page 37 - Pay special care to the directionality.

Hardware Setup SY-5EHM/5EH5 V1.3 32 Warning: Follow these precautions to preserve your Motherboard from any remnant currents when connecting to ATX power supply: Turn off the power supply and unplug the power cord of the ATX power supply before connecting to ATX PW connector. The Motherboard require...

Page 38 - CPU frequency; Linear Burst; Interleave; Intel

Hardware Setup SY-5EHM/5EH5 V1.3 33 Do NOT use an ATX and AT powersupply at the same time. Use only ONE type of power supply. Step 15. CPU frequency of 83MHz Setting (JP8) This jumper is used in the CPU frequency selection. It is set to 1-2 for a CPU frequency of 83 MHz. For all other CPU frequencie...

Page 39 - CMOS Clearing; Short; If a default I/O address conflicts with other I/O

Hardware Setup SY-5EHM/5EH5 V1.3 34 CMOS Clearing (JP5) After you have turned off your computer, clear the CMOS memory by momentarily shorting pins 2-3 on jumper JP5, for a few seconds. Then restore JP5 to the initial 1-2 jumper setting in order to recover and retain the default settings. CMOS Clear...

Page 40 - BIOS SETUP

Hardware Setup SY-5EHM/5EH5 V1.3 35 Step 19. Power On You have now completed the hardware installation of your Motherboard successfully. 1. Turn the power on 2. To enter the BIOS Setup Utility, press the <DEL> key while the system is performing the diagnostic checks, Note: If you have failed t...

Page 41 - BIOS Setup Utility; Chapter 3; BIOS SETUP UTILITY; BIOS Setup Utility.; Selecting items; Use the arrow keys to move between items and select fields.

BIOS Setup Utility SY-5EHM/5EH5 V1.3 36 Chapter 3 BIOS SETUP UTILITY This Motherboard's BIOS setup program uses the ROM PCI/ISA BIOS program from Award Software Inc. To enter the Award BIOS program's Main Menu: 1. Turn on or reboot the system. 2. After the diagnostic checks, press the [Del] key to e...

Page 42 - Shift F2; EXIT WITHOUT SAVING

BIOS Setup Utility SY-5EHM/5EH5 V1.3 37 Hot Keys: Function keys give you access to a group of commands throughout the BIOS utility. Function Command Description F1 Help Gives the list of options available for each item. Shift F2 Color Change the color of the display window. F5 Old values Restore the...

Page 43 - -1 STANDARD CMOS SETUP; Display; mm/dd/yyyy Type the current date You can also the; Time; Type the current time 24-hour clock format

BIOS Setup Utility SY-5EHM/5EH5 V1.3 38 3-1 STANDARD CMOS SETUP Select the [STANDARD CMOS SETUP] option from the Main Menu and press [Enter] key. This screen allows you to modify the basic CMOS settings. After you have completed the changes, press [Esc] key to return to the Main Menu. 3-1.1 Date &am...

Page 46 - -2 BIOS FEATURES SETUP

BIOS Setup Utility SY-5EHM/5EH5 V1.3 41 3-2 BIOS FEATURES SETUP Select the [BIOS FEATURES SETUP] option from the Main Menu and press [Enter] key. ROM PCI/ISA BIOS BIOS FEATURES SETUP AWARD SOFTWARE, INC. Video BIOS ShadowC8000-CBFFF ShadowCC000-CFFFF ShadowD0000-D3FFF ShadowD4000-D7FFF ShadowD8000-D...

Page 48 - Setting

BIOS Setup Utility SY-5EHM/5EH5 V1.3 43 3-2.3 System Boot Control Settings System Boot Control Settings Setting Description Note Disabled Quick Power On Self Test Enabled Provides a fast POTS at boot-up. Default A, C, SCSI C, A, SCSI C, CD-ROM, A CD-ROM, C, A D, A, SCSI E, A, SCSI F, A, SCSI SCSI, A...

Page 49 - System Boot Control Settings (continued)

BIOS Setup Utility SY-5EHM/5EH5 V1.3 44 System Boot Control Settings (continued) System Boot Control Settings Setting Description Note Normal Gate A20 Option Fast Allows RAM access above 1MB using the fast gate A20 line. Default Enabled This allows to perform a redundancy check on the parity bit in ...

Page 51 - Disabled

BIOS Setup Utility SY-5EHM/5EH5 V1.3 46 Other Control Options (Continued) Other Control Options Setting Description Note Disabled Enabled Video or Adapter BIOS Shadow The BIOS is shadowed in a 16K segment if it is enabled and if it has BIOS present. These 16 segments can be shadowed from ROM to RAM....

Page 52 - -3 CHIPSET FEATURES SETUP; Change these settings only if you are already

BIOS Setup Utility SY-5EHM/5EH5 V1.3 47 3-3 CHIPSET FEATURES SETUP Caution: Change these settings only if you are already familiar with the Chipset. The [CHIPSET FEATURES SETUP] option changes the values of the chipset registers. These registers control the system options in the computer. ROM PCI/IS...

Page 55 - -4 POWER MANAGEMENT SETUP

BIOS Setup Utility SY-5EHM/5EH5 V1.3 50 3-4 POWER MANAGEMENT SETUP The [POWER MANAGEMENT SETUP] sets the system's power saving functions. ROM PCI/ISA BIOS POWER MANAGEMENT SETUP AWARD SOFTWARE, INC. Primary INTR IRQ3 (COM2) IRQ4 (COM1) IRQ5 (LPT2) IRQ6 (Floppy Disk) IRQ7 (LPT1) IRQ8 (RTC Alarm) IRQ9...

Page 56 - Doze timer Standby timer Suspend timer

BIOS Setup Utility SY-5EHM/5EH5 V1.3 51 3-4.1 Power Management Controls Power Management Controls Setting Description Note Disabled Default ACPI function Enabled Enabled if you use Windows 98 and want to use ACPI User Define Lets you define the HDD and system power down times. Doze timer Standby tim...

Page 57 - Setting Description

BIOS Setup Utility SY-5EHM/5EH5 V1.3 52 3-4.2 PM Timers PM Timers Setting Description Note Disable Default HDD Power Down 1-15Min When the set time has elapsed, BIOS sends a command to the HDD to power down. This turns off the HDD motor. Some older model HDDs may not support this advanced function. ...

Page 59 - Primary

BIOS Setup Utility SY-5EHM/5EH5 V1.3 54 PM Events (Continued) PM Events Setting Description Note Primary IRQ3(COM2), IRQ4(COM1), IRQ5(LPT2), IRQ6(Floppy Disk), IRQ7(LPT1), IRQ12(PS/2 mouse), IRQ13(Coprocessor), IRQ14(HardDsik) IRQ# Secondary IRQ9(IRQ2 Redir), IRQ10( Reserved), IRQ11(Reserved) Disabl...

Page 63 - -6 LOAD SETUP DEFAULTS; -7 LOAD BIOS DEFAULTS; If you run into any problems after loading BIOS

BIOS Setup Utility SY-5EHM/5EH5 V1.3 58 3-6 LOAD SETUP DEFAULTS Select the [LOAD SETUP DEFAULTS] option from the Main Menu to load the system values you have previously saved. This option is recommended if you need to reset the system setup and to retrieve the old values. Type [Y] to use the Setup D...

Page 64 - -8 INTEGRATED PERIPHERALS

BIOS Setup Utility SY-5EHM/5EH5 V1.3 59 3-8 INTEGRATED PERIPHERALS Caution: Change these settings only if you are already familiar with the Chipset. The [INTEGRATED PERIPHERALS] option changes the values of the chipset registers. These registers control the system options in the computer. The follow...

Page 68 - -9 SUPERVISOR PASSWORD; to enter the BIOS Setup program.

BIOS Setup Utility SY-5EHM/5EH5 V1.3 63 3-9 SUPERVISOR PASSWORD Based on the setting you have made in the [Security Option] of the [BIOS FEATURES SETUP] section, the password prevents access to the system or the setup program by unauthorized users. Follow this procedure to set a new password or disa...

Page 69 - Without entering password; to exit

BIOS Setup Utility SY-5EHM/5EH5 V1.3 64 3. Enter your new password and press [Enter]. The following message appears, prompting to confirm the new password: 4. Re-enter your password and then press [Enter] to exit to the Main Menu. This diagram outlines the password selection procedure: 3-10 USER PAS...

Page 70 - -11 IDE HDD AUTO DETECTION; This function is only valid for IDE type of hard disk

BIOS Setup Utility SY-5EHM/5EH5 V1.3 65 3-11 IDE HDD AUTO DETECTION This Main Menu function automatically detects the hard disk type and configures the STANDARD CMOS SETUP accordingly. ROM PCI/ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC. HARD DISKS TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE P...

Page 71 - Drivers Installation; Chapter 4; DRIVERS INSTALLATION; Insert the SOYO CD into the CD-ROM drive; Please S elect Your Board

Drivers Installation SY-5EHM/5EH5 V1.3 66 Chapter 4 DRIVERS INSTALLATION Your SY-5EHM/5EH5 V1.3 Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software available for installation, and (3) a database...

Page 72 - Install Drivers and Utilities; The following BIOS default settings should not be changed:

Drivers Installation SY-5EHM/5EH5 V1.3 67 The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Re...

Page 73 - Follow the instruction below.; Click the; ETEQ 4in1 driver package

Drivers Installation SY-5EHM/5EH5 V1.3 68 your system. Install Windows 95/98 If you installed Windows 95 you will now need to upgrade your USB driver by running the following program on your Windows CD: Win95/OSR2/Usbsupp/USBsupp.exe After installation of windows, you will need to install the ETEQ d...

Page 74 - Bus Master PCI IDE Driver; Select which driver you want to install and click; Check the Latest Releases

Drivers Installation SY-5EHM/5EH5 V1.3 69  Bus Master PCI IDE Driver This driver will speed up the data-transfer rate to and from the harddisk.  AGP VxD Driver This driver must be installed in order to be able to make use of the on-board AGP Video functionality.  ETEQ Chipset Functions Registry T...

Page 75 - Enter the SOYO CD

Drivers Installation SY-5EHM/5EH5 V1.3 70 Step 4. Enter the SOYO CD Select which driver you want to install and click OK, or click Cancel to return to the main menu. When the installation program of a driver starts running the SOYO-CD will exit. After finishing the installation, restart the SOYO-CD ...