South Bend SB1313 - Manuals

-2- 6. While the back plate is still installed in the lathe, scribe a 147mm diameter centerline in the face of the back plate. This centerline is for the chuck mounting bolt holes. 7. Along the circumference of the centerline just scribed, mark and center punch the three mounting bolt hole locations...

-3- Care & Maintenance For optimum performance from your chuck, follow the maintenance schedule below, and never hammer on the chuck, jaws, or a workpiece clamped in the chuck. Never subject the chuck to abrasives, flame, or water. Daily: • Check/correct loose mounting bolts. • Use a vacuum, rag...

-4- Copyright © March, 2010 By South Bend Lathe Co. WARNING: No portion of this manual may be reproduced in any shape or form without the written approval of South Bend Lathe Co. #CR12664 Printed in Taiwan. www.southbendlathe.com Troubleshooting If you need replacement parts, or if you are unsure ho...