South Bend SB1231 - Manuals

Safety • Chuck Key Safety: A chuck key left in the chuck can become a dangerous projectile when the spindle is started. Always remove the chuck key after using it. Develop a habit of not taking your hand off of a chuck key unless it is away from the machine. • Disconnect Power: Disconnect the lathe ...

Camlock Stud Installation The camlock studs that are shipped with this chuck may be pre-installed from the factory. If so skip this section and complete Chuck Installation and Removal on Page 4; otherwise, install the camlock studs as outlined below: 1. Oil and thread each cam stud into the chuck un...

6. With the help of another person, or with the help of a chuck cradle, align the chuck with the spindle so the studs and camlock bores are aligned correctly, and carefully slide the chuck onto the lathe spindle. Never rest the chuck on its lower studs, as shown in Figure 5, and roll or push the top...