Sony RDPXA700IP - Manuals
Sony RDPXA700IP – Manual in PDF format online.
Manuals:
Manual Sony RDPXA700IP
Summary
1 US Owner’s Record The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.Model No. Serial No. To reduce the risk of fire or electric shock, do not expose this...
2 US NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and c...
3 US For customers in Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired o...
4 US Table of Contents Overview of this Personal Audio Docking System .....................................................5 Guide to Parts and Controls ..........................6 Main unit .................................................6Remote control ........................................9 Ge...
5 US Overview of this Personal Audio Docking System iPod You can enjoy sound from an iPod, iPhone or iPad by setting it on the Docking Tray of this unit, while charging it at the same time (page 16). AirPlay You can enjoy sound from an iPhone/iPod touch/iPad or iTunes with this unit anywhere in your...
6 US Guide to Parts and Controls Top/Front A Docking Tray Press the Docking Tray on the front of the unit to open or close it.Set your iPod on the Docking Tray when you want to operate it on the tray or charge it (page 16). B Remote sensor (inside) C Reaction indicator (inside) Flashes when the oper...
7 US E “iPod,” AUDIO IN buttons, indicators Selects a source device (page 16, 19). Lights up amber when the unit is in the iPod/AUDIO IN mode. F “AirPlay” indicator Lights up green when the unit is in the “AirPlay” mode. G LINK indicator Indicates the connection status of the wired/Wi-Fi network.Gre...
8 US Rear A WPS button Use to connect the unit to your Wi-Fi network, refer to the supplied “AirPlay via Wi-Fi Network Setup” for details. B LAN port Connect a network (LAN) cable (not supplied, page 12). C ALL RESET button Press and hold to reset the unit to the factory default settings (the ? / 1 ...
9 US A “iPod,” AUDIO IN buttons Selects a source device (page 16, 19). B u (Play/Pause) button Starts playback of iPod. Press repeatedly to pause/resume playback. > (Forward) button Go to the next track.Press and hold to locate a desired point. . (Backward) button Go back to the previous track. D...
10 US Preparing the Unit and the Remote Control 1 Connect the supplied AC power cord to the supplied AC adaptor. 2 Connect the AC adaptor to the DC IN 19.5 V jack on the unit. Note on the AC adaptor Use the Sony supplied AC adaptor only. The polarity of the plugs of other manufactures may be differe...
11 US Press the ? / 1 button The ? / 1 indicator starts flashing. You can operate the unit when the ? / 1 indicator stops flashing and lights up green.The LINK indicator also starts flashing. You can set up or use the “AirPlay” function when it stops flashing.It may take a while for these indicators...
12 US Connecting Your Network See the following descriptions to determine the correct way to set up. Option 1: Wi-Fi Connection using WPS Push Button Configuration Method Setup device: Wireless LAN router/access point Refer to A in the supplied “AirPlay via Wi-Fi Network Setup” for details. Option 2...
13 US 1 Prepare for the following devices. • This unit• Mac or PC• Wireless LAN router/access point• Network (LAN) cable (not supplied) if needed 2 Have your wireless network name (SSID) and Security Key (if applicable) available for reference. Refer to the operating instructions of the wireless LAN...
14 US 7 Select the SSID of the wireless LAN router/access point, then input the Security Key (if applicable). 8 Select [Apply]. 9 Disconnect the network (LAN) cable from the unit following the on-screen instructions. The unit restarts automatically, then the LINK indicator lights up green when the c...
15 US About the LINK indicator Tips • You can also connect the unit to your wireless or wired network by other methods including Manual Setup, WPS PIN, etc. • You can set up Fixed IP, as required.• You can set up a Proxy Server, as required. When a problem occurs while you are making the network set...
16 US Listening to iPod 1 Press the Docking Tray on the front of the unit to open it. 2 Set your iPod on the Docking Tray. Tip If a pop-up message appears on the display of the iPod, refer to “AirPlay via Wi-Fi Network Setup” or see “About D-Sappli” (page 16). 3 Press the “iPod” button. 4 Press the ...
17 US or a preset sound as the sound source. These three functions work in combination with the power supply of the unit. • D-Sappli also includes a clock display enlarge feature. Notes • If the App to link with this unit is not downloaded to your iPod, a pop-up message prompting you to download D-S...
18 US 3 Select “RDP-XA700iP” on the “AirPlay” menu of iTunes or your iPhone, iPod touch or iPad. iPhone, iPod touch or iPad iTunes 4 Start playing back audio content on the iPhone, iPod touch, iPad or iTunes. The unit starts playing back automatically. Tip If playback does not start, perform the pro...
19 US Listening to Other Components You can enjoy the sound from an optional component, such as a portable digital music player, through the speakers of this unit. Be sure to turn off the power of each component before making any connections. 1 Firmly connect the line output jack of a portable digit...
20 US Initializing the Unit You can initialize the unit. All settings of the unit are reset to the factory default settings when you initialize the unit. 1 Press the ? / 1 button to turn on the unit. 2 Remove the iPod from the Docking Tray. 3 Press and hold the ALL RESET button for at least 2 second...
21 US Troubleshooting If you run into any problems using the unit, use the following checklist. Should any problem persist, consult your nearest Sony dealer. The unit does not turn on. • Make sure the AC adaptor and the AC power cord are connected correctly. There is no sound. • Adjust the volume. T...
22 US The browser screen does not appear. • Check the proxy setting of the browser. This unit does not support proxies. Change the browser setting to one connecting this unit without a proxy. WPS configuration method failed. • You cannot connect to a network using WPS when the wireless LAN router/ac...
23 US There is no sound. • Check that no other iPhone/iPod touch/ iPad is set on this unit. If so, remove it from the network. • If the problem persists, reboot your iPhone/iPod touch/iPad or iTunes. The sound is too loud. • Loud sound may output from the unit if you set the volume too high via the ...
24 US Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: Power Output (reference) 15 W + 15 W + 30 W (at no more than 10 % harmonic distortion) Section for iPod DC out: 5 VMAX: 2.1 A Section for Wireless LAN Compatible standards IEEE 802.11 b/g(WEP 64 bit, WEP 128 ...
26 US Precautions • To disconnect the AC power cord, pull it out by the plug, not the cord. • Since a strong magnet is used for the speaker, keep credit cards using magnetic coding or spring-wound watches, CRT-based TVs, or projectors, etc., away from the unit to prevent possible damage from the mag...
27 US • This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. • The Wi-Fi Logo is a certification mark of the Wi-...
29 US END-USER LICENSE AGREEMENT FOR SONY SOFTWARE You should carefully read the following agreement before using the SONY SOFTWARE (defined below). Using the SONY SOFTWARE indicates your acceptance of the agreement. If you do not agree with it, you are not authorized to use the SONY SOFTWARE. IMPOR...
1 FR Pour éviter tout risque d’incendie ou d’électrocution, n’exposez pas cet appareil aux éclaboussures et évitez de placer dessus des objets remplis de liquide, tels que des vases. Pour éviter tout risque d’incendie, ne recouvrez pas l’appareil avec des journaux, des nappes, des rideaux, etc.Ne pl...
2 FR 7) Ne bloquez pas les ouvertures de ventilation. Installez l’appareil conformément aux instructions du fabricant. 8) N’installez pas l’appareil à proximité d’une source de chaleur, telle qu’un radiateur, un registre de chaleur, une cuisinière ou d’autres appareils (notamment des amplificateurs)...
3 FR Table des matières Présentation de ce système d’accueil audio personnel ................................................. 4 Guide des composants et des commandes ... 5 Unité principale ....................................... 5Télécommande ........................................ 8 Démarrage Pré...
4 FR Présentation de ce système d’accueil audio personnel iPod Vous pouvez écouter le son d’un iPod, d’un iPhone ou d’un iPad en l’installant sur le plateau de connexion de cet appareil, tout en le rechargeant simultanément (page 15). AirPlay Vous pouvez écouter le son d’un iPhone/iPod touch/iPad ou...
5 FR Guide des composants et des commandes Dessus/Avant A Plateau de connexion Appuyez sur le plateau de connexion, situé à l’avant de l’appareil, pour l’ouvrir ou le fermer.Installez votre iPod sur le plateau de connexion si vous souhaitez l’utiliser sur ce dernier ou le recharger (page 15). B Capt...
6 FR E Touches, témoins iPod, AUDIO IN Pour sélectionner un appareil source (page 15, 18). S’allume en orange lorsque l’appareil est en mode iPod/AUDIO IN. F Témoin AirPlay S’allume en vert lorsque l’appareil est en mode AirPlay. G Témoin LINK Indique l’état de la connexion du réseau filaire/Wi-Fi.V...
7 FR Arrière A Touche WPS Permet de connecter l’appareil à votre réseau Wi-Fi. Pour plus d’informations, consultez le « Guide de configuration d’AirPlay via le réseau Wi-Fi » fourni. B Port LAN Pour le raccordement d’un câble réseau (LAN) (non fourni, page 11). C Bouton ALL RESET Maintenez ce bouton...
8 FR A Touches iPod, AUDIO IN Pour sélectionner un appareil source (page 15, 18). B Touche u (lecture/pause) Lance la lecture de l’iPod. Appuyez à plusieurs reprises sur cette touche pour suspendre/reprendre la lecture. Touche > (avance) Pour passer à la plage suivante.Maintenez cette touche enfo...
9 FR Préparation de l’appareil et de la télécommande 1 Raccordez le cordon d’alimentation secteur à l’adaptateur secteur fourni. 2 Raccordez l’adaptateur secteur à la prise DC IN 19.5 V de l’appareil. Remarque sur l’adaptateur secteur Utilisez exclusivement l’adaptateur secteur Sony fourni. La polar...
10 FR Appuyez sur la touche ? / 1 Le témoin ? / 1 se met à clignoter. Vous pouvez utiliser l’appareil lorsque le témoin ? / 1 cesse de clignoter et s’allume en vert.Le témoin LINK se met également à clignoter. Lorsqu’il cesse de clignoter, vous pouvez configurer ou utiliser la fonction AirPlay.Il pe...
11 FR Connexion à votre réseau Consultez les descriptions suivantes pour déterminer la méthode de configuration correcte. Option 1 : Connexion Wi-Fi à l’aide du bouton de commande WPS Configuration du périphérique : Point d’accès/routeur LAN sans fil Pour plus d’informations, consultez le point A du...
12 FR 1 Préparez les périphériques suivants. • Cet appareil• Mac ou PC• Point d’accès/routeur LAN sans fil• Câble réseau (LAN) (non fourni) le cas échéant 2 Ayez sous la main le nom de votre réseau sans fil (SSID) et votre clé de sécurité (le cas échéant). Reportez-vous au mode d’emploi du point d’a...
13 FR 6 Sélectionnez [Paramètres réseau] dans le menu. 7 Sélectionnez le SSID du point d’accès/routeur LAN sans fil, puis saisissez la clé de sécurité (le cas échéant). 8 Sélectionnez sur [Appliquer]. 9 Débranchez le câble réseau (LAN) de l’appareil en vous conformant aux instructions affichées. L’a...
14 FR A propos du témoin LINK Conseils • Vous pouvez également connecter l’appareil à votre réseau sans fil ou filaire à l’aide d’autres méthodes, telles que la configuration manuelle, la saisie de code PIN WPS, etc. • Le cas échéant, vous pouvez définir une adresse IP fixe. • Le cas échéant, vous p...
15 FR Ecoute de l’iPod 1 Appuyez sur le plateau de connexion, situé à l’avant de l’appareil, pour l’ouvrir. 2 Installez votre iPod sur le plateau de connexion. Conseil Si un message contextuel s’affiche sur l’écran de l’iPod, reportez-vous au « Guide de configuration d’AirPlay via le réseau Wi-Fi » ...
17 FR Ecoute avec la fonction AirPlay 1 Vérifiez que l’appareil et votre iPhone, iPod touch, iPad ou iTunes sont connectés à votre réseau. Pour plus d’informations sur la connexion de l’appareil au réseau, reportez-vous à la page 11. Conseils • Mettez d’abord à jour le logiciel de votre iPhone, iPod...
19 FR Mise à jour du logiciel Lorsqu’une nouvelle mise à jour est disponible, le témoin UPDATE s’allume en vert quand l’appareil est connecté à Internet. 1 Vérifiez que le témoin UPDATE s’allume en vert. 2 Maintenez enfoncée la touche UPDATE située sur le dessus de l’appareil. L’appareil émet un bip...
20 FR Guide de dépannage Si vous rencontrez un problème pendant l’utilisation de l’appareil, vérifiez la liste ci-dessous. Si le problème persiste, consultez votre revendeur Sony le plus proche. L’appareil ne se met pas sous tension. • Vérifiez que l’adaptateur secteur et le cordon d’alimentation se...
21 FR • Vérifiez que l’iPod est compatible.• Vérifiez que la fonction iPod est sélectionnée. Fonctionnement impossible. • Vérifiez que l’iPod est correctement raccordé. L’iPod ne se recharge pas. • Vérifiez que l’iPod est correctement raccordé. • Vérifiez que l’adaptateur secteur et le cordon d’alim...
22 FR L’icône AirPlay ou le nom de l’appareil n’apparaît pas sur l’iPhone/iPod touch/ iPad ou sur iTunes. • Vérifiez que le témoin LINK s’allume en vert ou en orange. Voir « L’appareil ne peut pas se connecter au réseau. (D’autres périphériques situés sur le réseau domestique ne détectent pas ou ne ...
23 FR Il n’y a pas de son. • Vérifiez que le câble de raccordement audio (non fourni) est correctement branché. • Vérifiez que la fonction AUDIO IN est sélectionnée. Le son est faible. • Vérifiez le volume du composant externe connecté. • Vérifiez le volume de l’appareil. La télécommande ne fonction...
24 FR Spécifications SPECIFICATIONS DE PUISSANCE AUDIO PUISSANCE DE SORTIE ET DISTORSION HARMONIQUE TOTALE : Puissance de sortie (référence) 15 W + 15 W + 30 W (avec une distorsion harmonique ne dépassant pas 10 %) Section pour iPod Sortie DC : 5 VMAX. : 2,1 A Section pour LAN sans fil Normes compat...
26 FR Précautions • Pour débrancher le cordon d’alimentation secteur, saisissez-le par la fiche, et non par le cordon. • Comme un aimant puissant est utilisé dans le haut-parleur, éloignez les cartes de crédit utilisant un code magnétique ou les montres à ressort, les téléviseurs à écran cathodique,...
27 FR • « Made for iPod », « Made for iPhone » et « Made for iPad » signifient qu’un accessoire électronique a été conçu pour être connecté spécifiquement à un iPod, un iPhone ou un iPad, respectivement, et qu’il a été certifié par le développeur comme étant conforme aux normes de performances Apple...
28 FR Fournisseur WPA Copyright (c) 2003-2006, Jouni Malinen <[email protected]> et ses collaborateursTous droits réservés.La redistribution et l’utilisation sous forme source et binaire, avec ou sans modification, sont autorisées si les conditions suivantes sont respectées :1 Toute redistrib...
2 ES Índice Descripción general de este sistema de conexión de audio personal .....................3 Descripción de componentes y controles .....4 Unidad principal ......................................4Mando a distancia ....................................7 Procedimientos iniciales Preparación de l...
4 ES Descripción de componentes y controles Parte superior/frontal A Bandeja de conexión Presione la bandeja de conexión en la parte frontal de la unidad para abrirla o cerrarla.Coloque el iPod en la bandeja de conexión cuando desee utilizarlo desde la bandeja o cargarlo (página 14). B Sensor remoto...
5 ES E Botones iPod, AUDIO IN, indicadores Selecciona un dispositivo fuente (página 14, 17). Se ilumina de color ámbar cuando la unidad está en el modo iPod/AUDIO IN. F Indicador AirPlay Se ilumina de color verde cuando la unidad está en el modo AirPlay. G Indicador LINK Indica el estado de conexión...
6 ES Parte posterior A Botón WPS Utilícelo para conectar la unidad a la red Wi-Fi, consulte la “Configuración de AirPlay a través de la red Wi-Fi” suministrada para obtener más información. B Puerto LAN Para la conexión de un cable de red (LAN) (no suministrado, página 10). C Botón ALL RESET Manténg...
7 ES A Botones iPod, AUDIO IN Selecciona un dispositivo fuente (página 14, 17). B Botón u (Reproducción/Pausa) Inicia la reproducción del iPod. Pulse este botón varias veces para situar la reproducción en pausa o reanudarla. Botón > (Hacia adelante) Para pasar a la pista siguiente.Manténgalo puls...
8 ES Preparación de la unidad y el mando a distancia 1 Conecte el cable de alimentación de CA suministrado al adaptador de CA suministrado. 2 Conecte el adaptador de CA a la toma DC IN 19.5 V de la unidad. Nota sobre el adaptador de CA Utilice únicamente el adaptador de CA de Sony suministrado. La p...
9 ES Pulse el botón ? / 1 El indicador ? / 1 comienza a parpadear. Puede utilizar la unidad cuando el indicador ? / 1 deje de parpadear y se ilumine de color verde.El indicador LINK también comienza a parpadear. Puede configurar o usar la función AirPlay cuando deje de parpadear.Es posible que estos...
10 ES Conexión a la red Consulte las siguientes descripciones para determinar el modo de configuración correcto. Opción 1: conexión Wi-Fi mediante el método de configuración del pulsador WPS Configure el dispositivo: punto de acceso/enrutador de la red LAN inalámbrica Consulte la ilustración A en la...
11 ES 1 Prepare los siguientes dispositivos. • Esta unidad• Mac o PC• Un enrutador/punto de acceso de una red LAN inalámbrica • Un cable de red (LAN) (no suministrado) si es necesario 2 Tenga a mano el nombre de su red inalámbrica (SSID) y su clave de seguridad (si es necesario) para consultarlos. C...
12 ES 6 Seleccione [Configuración de red] en el menú. 7 Seleccione el SSID del enrutador/punto de acceso de la LAN inalámbrica y, a continuación, introduzca la clave de seguridad (si es necesario). 8 Seleccione [Aplicar]. 9 Siga las instrucciones en pantalla para desconectar el cable de red (LAN) de...
13 ES Acerca del indicador LINK Sugerencias • También puede conectar la unidad a su red inalámbrica o con cable mediante otros métodos, incluida la configuración manual, WPS PIN, etc. • Puede configurar una IP fija, según sea necesario.• Puede configurar un servidor proxy, según sea necesario. Si se...
14 ES Escuchar un iPod 1 Presione la bandeja de conexión en la parte frontal de la unidad para abrirla. 2 Coloque el iPod en la bandeja de conexión. Sugerencia Si aparece un mensaje emergente en la pantalla del iPod, consulte la “Configuración de AirPlay a través de la red Wi-Fi” o “Acerca de D-Sapp...
16 ES Escuchar a través de la función AirPlay 1 Compruebe si la unidad y el iPhone, el iPod touch, el iPad o iTunes se encuentran conectados a la red. Si desea obtener información detallada acerca de cómo conectar la unidad a la red, consulte la página 10. Sugerencias • Actualice el software del iPh...
17 ES Control de la reproducción AirPlay Puede utilizar el botón VOLUME +/– de la unidad y los botones VOLUME +/–, . y > del mando a distancia. El funcionamiento desde la unidad y el mando a distancia solo está activo si la unidad se ha seleccionado como dispositivo de salida. Si utiliza iTunes, ...
18 ES Actualización del software Si hay una nueva actualización disponible, el indicador UPDATE se ilumina de color verde si la unidad está conectada a Internet. 1 Compruebe que el indicador UPDATE se ilumine de color verde. 2 Mantenga pulsado el botón UPDATE en la parte superior de la unidad. La un...
19 ES Solución de problemas Si experimenta algún problema mientras utiliza la unidad, utilice la siguiente lista como referencia. Si el problema continúa, póngase en contacto con su distribuidor Sony más cercano. La unidad no se enciende. • Asegúrese de que el adaptador de CA y el cable de alimentac...
20 ES • Asegúrese de que la función de iPod esté seleccionada. Una operación no puede realizarse. • Asegúrese de que el iPod esté bien conectado. El iPod no se carga. • Asegúrese de que el iPod esté bien conectado. • Asegúrese de que el adaptador de CA y el cable de alimentación de CA estén bien con...
22 ES La función AirPlay tarda tiempo en iniciarse. • Utilice esta unidad en el modo de espera de red (página 4). Este modo reduce el tiempo de arranque cuando se utiliza la función AirPlay, pero aumenta el consumo de energía en el modo de espera. No hay sonido. • Asegúrese de que el cable de conexi...
23 ES Especificaciones ESPECIFICACIONES DE ALIMENTACIÓN DE AUDIO SALIDA DE POTENCIA Y DISTORSIÓN HARMÓNICA TOTAL: Salida de potencia (referencia) 15 W + 15 W + 30 W (a no más de un 10% de distorsión armónica) Sección para iPod Salida CC: 5 VMÁX.: 2,1 A Sección para LAN inalámbrica Normas compatibles...
25 ES Precauciones • Para desconectar el cable de alimentación de CA, tire siempre del enchufe, nunca del cable. • El altavoz utiliza un potente imán, por lo que debe mantener las tarjetas de crédito con banda magnética o los relojes de cuerda, televisores de tubo o proyectores alejados de la unidad...
26 ES dispositivo ni del cumplimiento de los estándares de seguridad y normativa. Tenga en cuenta que el uso de este accesorio con el iPod, el iPhone o el iPad puede afectar al rendimiento inalámbrico. • Microsoft, Windows, Windows Vista y Windows 7 son marcas comerciales o marcas comerciales regist...
28 ES CONTRATO DE LICENCIA DE USUARIO FINAL DE SOFTWARE DE SONY Lea atentamente el siguiente contrato antes de utilizar este SOFTWARE de SONY (definido a continuación). La utilización de este SOFTWARE de SONY implicará su aceptación de los términos del contrato. Si no los acepta, no estará autorizad...
Sony Manuals
-
Sony KDL-32EX520
User Manual
-
Sony KDL-32EX520
Manual
-
Sony STR-DH750
User Manual
-
Sony XBR-55HX929
User Manual
-
Sony XBR-55HX929
Manual
-
Sony SS-TSB122
User Manual
-
Sony HDR-XR260V
User Manual
-
Sony HDR-CX560V
User Manual
-
Sony HDR-CX560V
Manual
-
Sony BDV-N7200W
User Manual
-
Sony BDV-N7200W
Manual
-
Sony KDL-50W800B
User Manual
-
Sony KDL-46NX810
User Manual
-
Sony KDL-60W850B
User Manual
-
Sony KDL-40R450A
User Manual
-
Sony KDL-40R450A
Manual
-
Sony SS-F7000
User Manual
-
Sony SS-F7000
Manual
-
Sony KDL-32EX720
User Manual
-
Sony SA-WCT380
User Manual