Sony CFD-V20 - Manuals

Basic Operations Basic Operations 5 CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Display Track number 4 Press ^ . The player plays all the tracksonce. Playing time 6 OPEN/CLOSE p ^ VOLUME Use these buttons for additional operations = / + FUNCTION To Do this Adjust the volume Turn VOLUME. Stop playback ...

CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Basic Operations 6 Listening to the radio Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to FM or AM. 2 Turn TUNE to tune in a radiostation. If the received FM stereo is tooweak, the reception becomesmonaural. 1 2

Basic Operations Basic Operations 7 CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Use these buttons for additional operations To Do this Adjust the volume Turn VOLUME. Turn off the radio Set FUNCTION to TAPE(CD/RADIO OFF). To improve broadcast reception Reorient the antenna for FM. Reorient the player i...

CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Basic Operations 8 Playing a tape Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to TAPE (CD/RADIO OFF). 2 Press p6 to open the tape compartment and insert arecorded tape. Use TYPE I(normal) tape only. Close thecompartment. 3 Press ( . 3 2 ...

CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Basic Operations 10 Connect the supplied AC power cord (see page 16). 1 Press p6 to open the tape compartment and insert a blanktape. Use TYPE I (normal) tapeonly. 2 Select the program source youwant to record. To record from the CD player, setFUNCTION to CD...

CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 The CD Player 12 Using the display You can check information about the CDusing the display. The CD Player Checking the total track numbers and playing time Check the display in stop mode. Checking the remaining time Press DISPLAY/ENTER while playing a CD. To...

CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 The CD Player 14 Playing tracksrepeatedly (Repeat Play) You can play tracks repeatedly innormal, shuffle or program play modes(see page 15 ). PLAY MODE ^ FUNCTION = / + 1 Set FUNCTION to CD. 2 Press PLAY MODE until the repeat mode youwant appears in the disp...

15 The CD Player CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 The CD Player Creating yourown program (Program Play) You can arrange the playing order of thetracks on a CD. = / + Tips • CFD-V30 only: To create your ownprogram on the remote,proceed as follows:1 Set FUNCTION to CD on the player. 2 Press M...

CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Setting Up 16 Choosing thepower sources You can use the AC power or batteries asa power source. Use the AC power source whenever yourecord since recording consumes muchpower. Setting Up Battery compartment AC IN Connecting the AC power cord Insert one end of...

17 CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Setting Up Setting Up Adjusting thesound emphasis (TONE/MEGA BASS) You can adjust the tone and reinforce thebass sound. TONE MEGA BASS Adjusting the tone Turn TONE. Turn the control clockwise to enhance the high toneand counterclockwise to enhance the low...

Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 18 Precautions Additional Information On placement • Do not leave the player in a location near heat sources, or in a place subjectto direct sunlight, excessive dust ormechanical shock. • Do not place the player on an inclined or unsta...

19 Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from thecenter out. • Do not use solvents such as benzine, thinner, commercially availablecleaners or anti-static spray intendedfor vinyl LPs. • Do not e...

Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 20 Troubleshooting General Symptom The power does not come on. There is no audio. The audio is weak or has poorquality. The picture of your TV becomesunstable. The CD does not play/“no disc”lights in the display even when aCD is in pla...

21 Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Symptom The tape does not record. The audio is weak/The audioquality is poor. The sound is distorted. The remote does not function. Remedy • Make sure the tape is inserted properly.• Make sure the safety tab of the cassette is in pl...

Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 22 Cleaning the lens If the lens becomes dirty, it may cause askipping of sound during CD operation.Clean with a commercially availableblower. Cleaning the tape heads and tapepath Wipe the heads, the pinch roller and thecapstan with a ...

23 Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTALHARMONIC DISTORTIONWith 2.8-ohm loads, both channels drivenfrom 150 - 10,000 Hz; rated 2 W per channel-minimum RMS power, with no more than10 % total harmonic distortio...

CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Index A Adjusting sound emphasis 17tone 17 B Batteries for player 16 C CD player 12Choosing power sources 16Cleaning cabinet 22tape heads and tape path22 Creating your own program 15 D, E, F, G, H Demagnetizing the tape heads 22 Display 12 S Selecting tracks...