Page 2 - Warning; CAUTION; Information; About this manual
Introduction CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 2 Warning To prevent fire or shock hazard, donot expose the player to rain ormoisture. This symbol is intended to alertthe user to the presence ofuninsulated “dangerous voltage”within the product's enclosurethat may be of sufficientmagnitude to ...
Page 3 - Table of contents; Basic Operations; Playing a CD; The CD Player; Back cover
3 Introduction Basic Operations CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Table of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player 12 Using the display 13 Locating a specific track 14 Playing tracks repeatedly(Repeat Play) 15 Cr...
Page 4 - Press
CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Basic Operations 4 Playing a CD Basic Operations Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to CD. 2 Press 6 OPEN/CLOSE down to open the CD compartment andplace a CD on the CDcompartment. 3 Close the CD compartment. 1 4 2,3 With the lab...
Page 5 - Use these buttons for additional operations
Basic Operations Basic Operations 5 CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Display Track number 4 Press ^ . The player plays all the tracksonce. Playing time 6 OPEN/CLOSE p ^ VOLUME Use these buttons for additional operations = / + FUNCTION To Do this Adjust the volume Turn VOLUME. Stop playback ...
Page 6 - Listening to the radio; Set FUNCTION to FM or AM.
CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Basic Operations 6 Listening to the radio Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to FM or AM. 2 Turn TUNE to tune in a radiostation. If the received FM stereo is tooweak, the reception becomesmonaural. 1 2
Page 7 - To improve broadcast reception
Basic Operations Basic Operations 7 CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Use these buttons for additional operations To Do this Adjust the volume Turn VOLUME. Turn off the radio Set FUNCTION to TAPE(CD/RADIO OFF). To improve broadcast reception Reorient the antenna for FM. Reorient the player i...
Page 8 - Playing a tape
CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Basic Operations 8 Playing a tape Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to TAPE (CD/RADIO OFF). 2 Press p6 to open the tape compartment and insert arecorded tape. Use TYPE I(normal) tape only. Close thecompartment. 3 Press ( . 3 2 ...
Page 10 - Recording on a tape
CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Basic Operations 10 Connect the supplied AC power cord (see page 16). 1 Press p6 to open the tape compartment and insert a blanktape. Use TYPE I (normal) tapeonly. 2 Select the program source youwant to record. To record from the CD player, setFUNCTION to CD...
Page 12 - Using the display; Checking the total track numbers and playing; Check the display in stop mode.; Checking the remaining time
CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 The CD Player 12 Using the display You can check information about the CDusing the display. The CD Player Checking the total track numbers and playing time Check the display in stop mode. Checking the remaining time Press DISPLAY/ENTER while playing a CD. To...
Page 14 - When you’ve selected REP1,
CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 The CD Player 14 Playing tracksrepeatedly (Repeat Play) You can play tracks repeatedly innormal, shuffle or program play modes(see page 15 ). PLAY MODE ^ FUNCTION = / + 1 Set FUNCTION to CD. 2 Press PLAY MODE until the repeat mode youwant appears in the disp...
Page 15 - To cancel Program Play; To check the order of tracks before play; To change the current program
15 The CD Player CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 The CD Player Creating yourown program (Program Play) You can arrange the playing order of thetracks on a CD. = / + Tips • CFD-V30 only: To create your ownprogram on the remote,proceed as follows:1 Set FUNCTION to CD on the player. 2 Press M...
Page 16 - Setting Up; Connecting the AC power cord; Replacing batteries; Using the player on batteries
CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Setting Up 16 Choosing thepower sources You can use the AC power or batteries asa power source. Use the AC power source whenever yourecord since recording consumes muchpower. Setting Up Battery compartment AC IN Connecting the AC power cord Insert one end of...
Page 17 - Adjusting the tone; To return to normal sound, press the button again.
17 CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Setting Up Setting Up Adjusting thesound emphasis (TONE/MEGA BASS) You can adjust the tone and reinforce thebass sound. TONE MEGA BASS Adjusting the tone Turn TONE. Turn the control clockwise to enhance the high toneand counterclockwise to enhance the low...
Page 18 - Precautions; Additional Information
Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 18 Precautions Additional Information On placement • Do not leave the player in a location near heat sources, or in a place subjectto direct sunlight, excessive dust ormechanical shock. • Do not place the player on an inclined or unsta...
Page 19 - Notes on CDs
19 Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from thecenter out. • Do not use solvents such as benzine, thinner, commercially availablecleaners or anti-static spray intendedfor vinyl LPs. • Do not e...
Page 20 - Troubleshooting; General; Radio; CD Player
Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 20 Troubleshooting General Symptom The power does not come on. There is no audio. The audio is weak or has poorquality. The picture of your TV becomesunstable. The CD does not play/“no disc”lights in the display even when aCD is in pla...
Page 21 - Tape Player
21 Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Symptom The tape does not record. The audio is weak/The audioquality is poor. The sound is distorted. The remote does not function. Remedy • Make sure the tape is inserted properly.• Make sure the safety tab of the cassette is in pl...
Page 22 - Cleaning the lens; Maintenance; Demagnetizing the tape heads
Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 22 Cleaning the lens If the lens becomes dirty, it may cause askipping of sound during CD operation.Clean with a commercially availableblower. Cleaning the tape heads and tapepath Wipe the heads, the pinch roller and thecapstan with a ...
Page 23 - Specifications; Other Specifications
23 Additional Information CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTALHARMONIC DISTORTIONWith 2.8-ohm loads, both channels drivenfrom 150 - 10,000 Hz; rated 2 W per channel-minimum RMS power, with no more than10 % total harmonic distortio...
Page 24 - Index
CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92 Index A Adjusting sound emphasis 17tone 17 B Batteries for player 16 C CD player 12Choosing power sources 16Cleaning cabinet 22tape heads and tape path22 Creating your own program 15 D, E, F, G, H Demagnetizing the tape heads 22 Display 12 S Selecting tracks...
