Sony Ericsson LMD-2030W - Manuals

Sony Ericsson LMD-2030W – Manual in PDF format online.

Manuals:

Manual

Manual Sony Ericsson LMD-2030W

Summary

Page 2 - THIS APPARATUS MUST BE EARTHED.; WARNING; Important Safety Instructions

2 Owner’s Record The model and serial numbers are located at the rear. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. ____________________Serial No. ____________________ • Read these instructions.• K...

Page 4 - Table of Contents; Input Signals and Adjustable/

4 Table of Contents Table of Contents Precaution ................................................ 5 On Safety ................................................... 5On Installation ........................................... 5Handling the LCD Screen ......................... 5Note on faulty pixels on ...

Page 5 - Precaution; Before cleaning; Be sure to disconnect the AC power cord from the AC outlet.; On cleaning the monitor screen

5 Precaution Precaution On Safety • Operate the unit only with a power source as specified in the “Specifications” section. • A nameplate indicating operating voltage, etc., is located on the rear panel. • Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked b...

Page 6 - On Replacing the Parts; Features; input, it can be used under various lighting

6 Features On Replacing the Parts Note that if service personnel changes some parts during repair, these parts may be retained. Features The LMD-2030W (20-inch) is a multiple format LCD monitor for broadcast/professional use featuring a precise image and high performance. Supporting digital/analog m...

Page 7 - You can inhibit a key, function to prevent misoperation.

7 Features Blue only mode In the blue only mode, a monochrome display is obtained with all the three R/G/B picture elements driven with a blue signal.This mode is convenient for chroma and phase adjustments and monitoring of VCR noise. Marker function CENTER MARKER, 16:9 MARKER for the 4:3 aspect ra...

Page 8 - Location and Function of Parts and Controls; Front Panel; Lights when the key inhibit function works.; qd

8 Location and Function of Parts and Controls Location and Function of Parts and Controls Front Panel a Tally lamp You can check the status of the monitor by the color of the tally lamp.The tally lamp lights in red, green or amber depending on the setting of the REMOTE PARALLEL menu. b POWER switch ...

Page 9 - LINE A button; Press to monitor the signal through the LINE A input connector.; Speaker; The audio signal selected by the input select button (; Input Signals and Adjustable/Setting Items

9 Location and Function of Parts and Controls m LINE A button Press to monitor the signal through the LINE A input connector. n Speaker The audio signal selected by the input select button ( j SDI button, k RGB/COMPONENT button, l HDMI button or m LINE A button) on the front panel is output. Input S...

Page 10 - Rear Panel; HDMI IN connector; ) signal. Unless an external sync signal is; CAUTON

10 Location and Function of Parts and Controls Rear Panel a HDMI IN connector HDMI (High-Definition Multimedia Interface) is an interface that supports both video and audio on a single digital connection, allowing you to enjoy high quality digital picture and sound. The HDMI specification supports H...

Page 11 - LINE A connectors; Connect the supplied AC power cord.; Installing to the Rack; Attach the mounting bracket, then attach the unit to the rack.

11 Installing to the Rack g LINE A connectors Line input connectors for Y/C separate, composite video and audio signals and their loop-through output connectors.Press the LINE A button to monitor the signal input through these connectors.If you input signals to both Y/C IN and VIDEO IN, the signal i...

Page 12 - Slide the AC plug holder over the cord until it locks.; To disconnect the AC power cord; Pull out the AC plug holder while pressing the lock levers.; Note

12 Connecting the AC Power Cord / Attaching the Input Adaptor Connecting the AC Power Cord 1 Plug the AC power cord into the AC IN socket on the rear panel. Then, attach the AC plug holder (supplied) to the AC power cord. 2 Slide the AC plug holder over the cord until it locks. To disconnect the AC ...

Page 13 - The default setting values for each area; Press the POWER switch.; If LATIN AMERICA is selected:

13 Selecting the Default Settings Selecting the Default Settings When you turn on the unit for the first time after purchasing it, select the area where you intend to use this unit from among the options. The default setting values for each area 1 Press the POWER switch. The power is turned on and t...

Page 14 - If ASIA EXCEPT JAPAN is selected:

14 Selecting the Menu Language 4 If ASIA EXCEPT JAPAN is selected: Customers who will use this unit in the shaded areas shown in the map below should select NTSC AREA.Other customers should select PAL AREA. 3 Press the M or m button to narrow the area further and then press the , or ENTER button. Th...

Page 15 - To clear the menu; Using the Menu

15 Using the Menu 4 Press the M or m button to select the “LANGUAGE”, then press the , or ENTER button. The selected item is displayed in yellow. 5 Press the M or m button to select a language, then press the ENTER button. The menu changes to the selected language. To clear the menu Press the MENU b...

Page 16 - Items

16 Adjustment Using the Menus 3 Select an item. Press the M or m button to select the item, then press the , or ENTER button.The item to be changed is displayed in yellow. Note If the menu consists of multiple pages, press M or m to go to the desired menu page. 4 Make the setting or adjustment on an...

Page 17 - STATUS menu

17 Adjustment Using the Menus Adjusting and Changing the Settings STATUS menu The STATUS menu is used to display the current status of the unit. The following items are displayed: • Signal format • Color temperature • Gamma • Component level • NTSC setup • RGB/Component select • Scan mode • Display ...

Page 19 - REMOTE PARALLEL menu; REMOTE PARALLEL; KEY INHIBIT menu; Troubleshooting; The display is colored in green or purple

19 Troubleshooting REMOTE PARALLEL menu Select the PARALLEL REMOTE connector pins for which you want to change the function.You can assign various functions to 1 to 4 pins and 6 to 8 pins. The following lists the functions you can assign to the pins. REMOTE PARALLEL • – – – (“– – –”: No function is ...

Page 20 - Specifications; Picture performance; Input; General

20 Specifications Specifications Picture performance LCD panel a-Si TFT Active Matrix Picture size 20.1 type 433 × 271 × 511 mm(W/H/Diagonal) (17 1 / 8 × 10 3 / 4 × 20 1 / 8 inches) Resolution 1,680 × 1,050 dots (WSXGA+) Viewing angle 89° / 89° / 89° / 89° (typical) Scan Under –3 %Over 5 % Aspect 16...

Page 21 - Pin assignment; Wiring required to use the Remote Control

21 Specifications Pin assignment PARALLEL REMOTE connectorModular connector(8-pin) For details on function allocations, see “REMOTE PARALLEL menu” (page 19). Wiring required to use the Remote Control Connect the function you want to use with a Remote Control to the Ground (Pin 5). Pin number Functio...

Page 22 - Video signal formats; The unit is applicable to the following signal formats.; Applicable DVI input signals

22 Specifications Video signal formats The unit is applicable to the following signal formats. *1 Also supports frame rate 1/1.001. Applicable DVI input signals When a PC signal is input to the HDMI IN connector using a DVI conversion cable Note The sides of the displayed picture may be invisible de...

Page 23 - Dimensions; Front

23 Dimensions Dimensions Front Rear Side Bottom 493 ( 1 9 1 / 2 ) 166.5 ( 6 5 / 8 ) 194.5 (7 3 / 4 ) 239.4 ( 9 1 / 2 ) 2.5 ( 1 / 8 ) 1 0 0 ( 4 ) 40 (1 5 / 8 ) 100 (4) 7 5 . 2 ( 3 ) 96.8 (3 7 / 8 ) 67.7 (2 3 / 4 ) 2 6 4 . 4 ( 1 0 1 / 2 ) 8 7 ( 3 1 / 2 ) 2 0 4 . 3 ( 8 1 / 8 ) 1 6 5 . 1 ( 6 1 / 2 ) 2 1...