Page 2 - IMPORTANT INSTRUCTIONS; manual in a safe place for future reference.; ) Always place the unit on a level surface.
Thank you for choosing a Soleus Air Powered by Gree Portable Air Conditioner. This owner’s man- ual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself wit...
Page 3 - SPECIFICATIONS; temperature, the air conditioner may not work properly.; PACKAGE CONTENTS; Portable Air Conditioner
3 SPECIFICATIONS • The cooling capacity is measured at an ambient temperature of DB 95 °F, WB 83 °F. • Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode. • Power consumption is measured when the fan runs at the highest speed setting. •...
Page 4 - LCDI POWER CORD AND PLUG
LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachment...
Page 6 - PARTS & WINDOW KIT ASSEMBLY; PARTS; EXHAUST HOSE & ADAPTERS; ASSEMBLY & INSTALLATION; INSTALLATION; packaging and locate components.
PARTS & WINDOW KIT ASSEMBLY PARTS EXHAUST HOSE & ADAPTERS ASSEMBLY & INSTALLATION INSTALLATION When the unit is operating as an air conditioner or dehumidifier, the window kit and exhaust hose must be installed. When the unit is operating in fan mode, the window kit and exhaust hose do n...
Page 7 - SINGLE HOSE WINDOW KIT INSTALLATION; ciency
7 SINGLE HOSE WINDOW KIT INSTALLATION When installing the exhaust hose, try and keep it as flat as possible. The less angles and bends in the hose, the better the unit will perform. If bending or an angle is necessary, use single 90 ° angles like the pictures above and below. Multiple bends will dec...
Page 8 - MODE; Cool; Temperature
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS CONTROL PANEL & LED DISPLAY CONTROL PANEL OPERATING INSTRUCTIONS 1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER button once more to turn the unit off. 2) Mode Selection - Press the MODE Button r...
Page 11 - DRAINING COLLECTED WATER
11 When the temperature or humidity is too high, the air conditioner may not be able to evaporate all of the water as quickly as needed. All moisture that is unable to be evaporated is placed in a small bank up water tank in- side the unit. When this tank is completely full, an alarm will sound, the...
Page 12 - MAINTENANCE; recommended to clean the filter once every two weeks or as needed.; PRESENTATION OF THE MANUFACTURER.
MAINTENANCE Note: Make sure power is off and the power cord is not plugged into an electrical outlet prior to performing any maintenance on the unit. Clean or replace filter - If the air filter is blocked with a dust, the airflow volume may reduce. It is recommended to clean the filter once every tw...
Page 13 - PROBLEM; The Air Conditioner will not start; POSSIBLE CAUSES; TROUBLESHOOTING; The Air Conditioner does not cool
PROBLEM The Air Conditioner will not start POSSIBLE CAUSES The air conditioner is unplugged or not connected well. The fuse is blown/circuit breaker is tripped. Power Failure The current interrupter device is tripped. SOLUTIONS • Make sure the air conditioner plug is pushed completely into the out- ...
Page 14 - The LED Display is showing “E5”; The LED Display is showing “H8”
PROBLEM The LED Display is showing “E5” POSSIBLE CAUSES Over Current Protection SOLUTIONS • Unplug for 10 minutes and then turn on the unit. If “E5” is still dis- played, contact customer service. TROUBLESHOOTING (CONT.) The LED Display is showing “H8” The backup water tank is full • Drain the water...
Page 15 - WARRANTY; THIS WARRANTY DOES NOT COVER:
WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air Powered by Gree Portable Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of origi...