Snapper 7600024, 7600023 - Manuals

STEP 12: Assemble the discharge tubes: a. Install one strap assembly to each of the locations marked ‘A’ in Figure 19. Insert one #10-24 x 5/8” pan headscrew, fitted with one #10 x 1/2” OD flat washer, out throughthe hole in the tube or adapter. Secure with one #10 x 3/4”OD flat washer, strap, and #...

STEP 13: Assemble the grass containers: a. Match the numbers on the side of each container segment with its corresponding segment. ‘1’s and ‘2’sdesignate the first container, ‘3’s and ‘4’s designate thesecond. See Figure 21. b. With the matched numbers aligned, insert the bottom segment of each cont...

Operation: To use the bagger: -Start the engine.-Move the throttle control to the fast position.-To fill the containers, always operate at a slow groundspeed. To check and clean the discharge tubes: -Stop machine motion, turn off the blades, stop the engine.-Disconnect the straps securing the discha...