Smeg CTP9015N - Manuals - manualsarea.com

Page 2 - Instructions; Manufacturer liability; Power voltage

Instructions 12 1.2 Manufacturer liability The manufacturer declines all liability for damage to persons or property caused by:• Use of the appliance other than as envisaged; • Non-observance of the user manual provisions; • Tampering with any part of the appliance; • Use of non-original spare parts...

Page 3 - Identification plate; Danger of suffocation

Instructions 13 EN Our appliances are packed in non-polluting and recyclable materials.• Deliver the packing materials to the appropriate recycling centre. 1.5 Identification plate The identification plate bears the technical data, serial number and brand name of the appliance. Do not remove the ide...

Page 4 - Description; General Description; Control panel; Operating principles; Capacity

Description 14 2 Description 2.1 General Description 1 Control panel 2 Drawer 3 Non-slip base 4 Heating fan 2.2 Control panel 1 ON/OFF switch Turns the appliance on and off. 2 Temperature knob Regulates the appliance's temperature. 2.3 Operating principles The appliance is equipped with a hot-air ve...

Page 5 - Use; Turning the drawer on and off; Improper use

Use 15 EN 3 Use 3.1 Instructions 3.2 First use 1. Remove any protective film from the outside or inside of the appliance. 2. Remove any labels (apart from the identification label). 3. Clean the appliance using a damp cloth. 4. Dry the appliance thoroughly.5. Heat the appliance for at least 2 hours,...

Page 6 - Cleaning and maintenance; Cleaning the appliance; Cleaning the drawer

Cleaning and maintenance 16 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the appliance Recommendations for cleaning the drawer To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first.Avoid letting food residue dry inside the drawer, as this...

Page 7 - Installation; Electrical connection

Installation 17 EN 5 Installation 5.1 Electrical connection General information Check the grid characteristics against the data indicated on the plate.The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance.Do not remove this plate for...

Page 8 - General instructions

Installation 18 General instructions • Position the drawer on a stable shelf.• The supporting shelf must have a rear opening of 20 mm. • The unit in which the drawer is installed must not have a back panel. Installing the appliance 1. Centre and line up the drawer in the opening. Ensure that the fra...