Page 2 - Trademarks
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurateand reliable. However, no responsibility is assumed by SMC for its use, nor forany infringements of patents or other rights of third parties which may resultfrom its use. No license is granted by implication or otherwise und...
Page 3 - IF AN SMC PRODUCT DOES NOT OPERATE AS
LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its productsto be free from defects in workmanship and materials, under normal use andservice, for the applicable warranty term. All SMC products carry a standard90-day limited warranty from the date of purchase from SM...
Page 5 - Federal Communication Commission Interference Statement; which the receiver is connected.; FCC Radiation Exposure Statement
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential install...
Page 6 - Compliances; which the receiver is connected; EC Conformance Declaration - Class A
Compliances FCC - Class A This equipment has been tested and found to comply with the limits for aClass A digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generate...
Page 7 - Industry Canada - Class A; Kippen oder Fallen könnte Beschädigungen hervorrufen.
+A1: 2001 (80 - 1000 MHz with 1 kHz AM 80% Modulation: 3 V/m) • Electrical fast transient/burst according to EN 61000-4-4:1995 + A1: 2001 (AC/DC power supply: ±1 kV, Data/Signal lines: ±0.5 kV) • Surge immunity test according to EN 61000-4-5:1995 + A1: 2001 (AC/DC Line to Line: ±1 kV, AC/DC Line to ...
Page 9 - EliteConnect; Mini-POS Ticket Printer; Table of Contents
EliteConnect TM Mini-POS Ticket Printer Table of Contents 1. Unpacking 9 A. Standard Package 9 2. Indicators and Connections 9 A. Front Panel of the Printer 9 B. Rear View of the Printer 9 C. Loading Paper Roll 10 3. Self Test of the Printer 10 4. Using the Printer 11 A. Connecting the Mini-POS Tick...
Page 10 - Indicators and Connections; A. Front Panel of the Printer
1. Unpacking A. Standard Package 1) EliteConnect TM Mini-POS Ticket Printer 1 piece 2) Control Keypad 1 piece 3) User's Guide 1 piece 4) Y Cable 1 piece 5) Printer Cable 1 piece 6) Power Adapter (7.5 VDC output) 1 piece 7) Power Cord 1 piece 8) Paper Roll 1 piece 2. Indicators and Connections A. Fro...
Page 11 - C. Loading Paper Roll; Self Test of the Printer; Power Indicator comes on and Error Indicator goes out.
C. Loading Paper Roll 3. Self Test of the Printer • Power up the printer while pressing and holding down the Online button. Power Indicator comes on and Error Indicator goes out. • Release the Online button. The printer prints out a successful test page.• Error Indicator turns back on. 10 1) Open th...
Page 12 - place for the printer is close to the keypad and Hotspot Gateway.
4. Using the Printer A. Connecting the Mini-POS Ticket Printer to the Wireless Hotspot Gateway • Locate an optimum location for the printer. In most instances, the best place for the printer is close to the keypad and Hotspot Gateway. • Using the Y-type cable provided (as shown in Figure 1), connect...
Page 13 - end to the electrical outlet.; NOTE; : Use of a different adapter may result in product damage.
• Connect the AC power adapter to the printer's power socket and the other end to the electrical outlet. NOTE : Use of a different adapter may result in product damage. B. Configuring the Wireless Hotspot Gateway and Printer for Ticket Printing Detailed instructions can be found in the EliteConnect ...
Page 14 - A. Physical Characteristics
5. Specifications A. Physical Characteristics Print Method Direct thermal Paper Width 57.5 mm ± 0.5 mm Effective Print Width 48 mm Print Speed Approx. 52 mm/sec or 14 lines/sec Print Head Print density: 384 dots/line or 8 dots/mmPrint dot space: 0.125 mmPrint life: 50 kmOverheat suspension protectio...
Page 16 - Description; Drive Signal
C. Power Input PRP-058 requires DC 7.5V/2.0A power. D. Cash Drawer Port Pin# Signal Description 1. N/C 2. Drive Signal Cash drawer drive signal (output) 3. Drive Signal Cash drawer drive signal (output) 4. DC +12V Output power 5. DC +12V Output power 6. N/C 15
Page 18 - For Literature or Advertising Response, Call:
FOR TECHNICAL SUPPORT, CALL: From U.S.A. and Canada (24 hours a day, 7 days a week) (800) SMC-4-YOU; Phn: (949) 679-8000; Fax: (949) 679-1481 From Europe : Contact details can be found on www.smc-europe.com or www.smc.com INTERNETE-mail addresses: [email protected]@smc-europe.c...