SMC Networks SMCRPU600W - Manuals

Page 6 - ii

L IMITED W ARRANTY ii WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITI...

Page 7 - iii; OMPLIANCES; Industry Canada - Class A

iii C OMPLIANCES FCC - Class A This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computi...

Page 8 - iv; EC Conformance Declaration - Class A

C OMPLIANCES iv EC Conformance Declaration - Class A SMC contact for these products in Europe is: SMC Networks Europe,Edificio Conata II, Calle Fructuós Gelabert 6-8, 2 o , 4 a , 08970 - Sant Joan Despí, Barcelona, Spain. This information technology equipment complies with the requirements of the Co...

Page 9 - Japan VCCI Class A

C OMPLIANCES v Japan VCCI Class A Australia AS/NZS 3548 (1995) - Class A SMC contact for products in Australia is: SMC-AustraliaL9, 123 Epping Rd,North Ryde, NSW AustraliaPhone: 61-2-88757887Fax: 61-2-88757777

Page 10 - Safety Compliance

C OMPLIANCES vi Safety Compliance Wichtige Sicherheitshinweise (Germany) 1. Bitte lesen Sie diese Hinweise sorgfältig durch.2. Heben Sie diese Anleitung für den späteren Gebrauch auf.3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine Flüssigoder Aerosolreiniger. Am bes...

Page 11 - vii; ABLE

vii T ABLE OF C ONTENTS About the Redundant Power Unit . . . . . . . . . . . . . . . . . . . . . . 1 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Front and Rear Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 12 - viii

Page 13 - Features and Benefits; Front and Rear Panels

1 A BOUT THE R EDUNDANT P OWER U NIT SMC’s Redundant Power Unit (RPU), SMCRPU600W, can supply 600 Watts of backup power to four SMC device (hubs or switches) in the event of an AC loss or failure of an internal power supply. Please check with SMC for information on the devices supported by this RPU....

Page 14 - LEDs

A BOUT THE R EDUNDANT P OWER U NIT 2 LEDs LED Status Description RPS On Green Power is being supplied to the RPU, normally operation, and connected to switch. Flashing Power is being supplied to the RPU and normally operation, but no connection to the switch. Off Power is off or failure occurred. FA...

Page 15 - RPU; RPU Packing List

3 I NSTALLING THE RPU The RPU may be placed on a desktop or mounted in a rack. Caution: Warning: DO NOT place the RPU on the floor as the case is not waterproof. RPU Packing List • Redundant Power Unit — provides backup power to four SMC devices • One AC Supply Power Cord — US, Continental Europe or...

Page 16 - Making Connections; Hub or Switch

I NSTALLING THE RPU 4 Making Connections Caution: Caution:DO NOT connect the RPU to an AC power source until the DC power cord has been connected to the other device (hub or switch). 1. Connect one end of the AC cord to the AC receptacle on the supported devices (hubs or switches), and the other end...

Page 17 - PECIFICATIONS

5 S PECIFICATIONS SMCRPU600W Receptacle IEC Socket 216C743-07 Size 440 x 285 x 430 mm (17.37 x 11.25 x 1.7 in.) Weight 27.562 lb. (5.0 kg) Temperature Operating: 0 to 40 °C (32 to 104 °F)Storage: -40 to 70 °C (-40 to 158 °F) Relative Humidity 20% to 90% Cooling 4 fans AC Input Power 100 to 240 VAC, ...

Page 18 - Fan

S PECIFICATIONS 6 Compliances Emissions FCC Class AVCCI Class AIndustry Canada Class A EN55022 (CISPR 22) Class AC-Tick - AS/NZS 3548 (1995) Class A Warranty One year Fan Voltage +12 VDC Operating voltage Range 7.0V to 13.8V Speed 8200 RPM Air Delivery 9.43 CFM Noise 30.5 dB Power Supply Voltage +12...

Page 19 - Line Regulation

S PECIFICATIONS 7 Line Regulation +/- 1% Load Regulation +/- 10% Noise and Ripple 10%, peak to peak Overshoot and Undershoot 5%