SMC Networks SMCEZNET-16SW - Manuals

SMC Networks SMCEZNET-16SW – Manual in PDF format online.

Manuals:

Manual

Manual SMC Networks SMCEZNET-16SW

Summary

Page 5 - IMITED

i L IMITED W ARRANTY L IMITED W ARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from th...

Page 6 - ii

L IMITED W ARRANTY ii WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITI...

Page 7 - iii; OMPLIANCES; Industry Canada - Class B

iii C OMPLIANCES FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment ...

Page 8 - iv; EC Conformance Declaration - Class B

C OMPLIANCES iv EC Conformance Declaration - Class B SMC contact for these products in Europe is: SMC Networks Europe,Edificio Conata II, Calle Fructuós Gelabert 6-8, 2 o , 4 a , 08970 - Sant Joan Despí, Barcelona, Spain. This information technology equipment complies with the requirements of the Co...

Page 9 - Safety Compliance

C OMPLIANCES v Safety Compliance UL / CSA (C22.2 No . 60950 ) CB (IEC 60 950) Wichtige Sicherheitshinweise (Germany) 1. Bitte lesen Sie diese Hinweise sorgfältig durch.2. Heben Sie diese Anleitung für den späteren Gebrauch auf.3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden S...

Page 11 - vii; ABLE

T ABLE OF C ONTENTS vii T ABLE OF C ONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Description of Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 12 - viii

Page 13 - Introduction

1 Introduction This manual describes how to install and use EZSwitch 10/100. SMC- EZNET-16SW features 16 10/100Mbps auto-negotiation ports, providing the flexibility required for easy network expansion. The EZSwitch can be used to connect PCs, servers, hubs, bridges, other switches and routers. It c...

Page 14 - Quick Installation Guide; Installing the Switch; Package Contents; Description of Hardware

Quick Installation Guide 2 Installing the Switch Before installing the EZ Switch 10/100, please verify that you have all the items listed under “Package Contents”. Also be sure you have all the necessary tools and cabling before installing the switch. Package Contents Description of Hardware The bas...

Page 15 - Mounting the Switch; Stacking Switches on a Flat Surface

Installing the Switch 3 Mounting the Switch The EZ Switch 10/100 can be placed directly on your desktop, or mounted in a rack. Before you start installing the switch, make sure you can provide the right operating environment, including power requirements, sufficient physical space, and proximity to ...

Page 16 - Connecting the Switch System; Making a Connection to an RJ-45 Port

Quick Installation Guide 4 Connecting the Switch System The EZ Switch 10/100 provides 16 RJ-45 ports on the base unit. Each of these ports supports connection to 10Mbps Ethernet or 100Mbps Fast Ethernet, and supports full or half-duplex operation. The transmission speed for each port is automaticall...

Page 17 - Powering On the Switch

Installing the Switch 5 Powering On the Switch 1. Plug the power cord into the power socket on the rear of the switch, and the other end into a power outlet. 2. Check the LED marked Power on the front panel to see if it is on. The unit will automatically select the setting that matches the connected...

Page 18 - Verifying System Operation; Applications; Switching Functions; Flexible Configuration

Quick Installation Guide 6 Verifying System Operation Verify that all attached devices have a valid connection. The switch monitors the link status for each port. If any device is properly connected to the switch and transmitting a link beat signal, the Link indicator will light up for the correspon...

Page 19 - Product Specifications; Base Unit; Physical Characteristics; Switching Criteria

Product Specifications 7 Product Specifications Base Unit Physical Characteristics Access MethodCSMA/CD Standards Conformance IEEE 802.3, IEEE 802.3u Communication Rate 10/100 Mbps Communication Mode Full or Half duplex Media Supported 10BASE-T - 100-Ohm Category 3,4,5 twisted-pair 100BASE-TX - 100-...

Page 20 - Troubleshooting; Diagnosing Switch Indicators; Power and Cooling Problems

Quick Installation Guide 8 Troubleshooting Diagnosing Switch Indicators The EZ Switch 10/100 can be easily monitored through panel indicators to assist the network manager in identifying problems. This section describes common problems you may encounter and possible solutions. Symptom:Link indicator...

Page 21 - Port and Cable Assignments; RJ-45 Port Description

Port and Cable Assignments 9 Port and Cable Assignments RJ-45 Port Description RJ-45 station ports (all port) can be attached to any devices which use a standard network interface (e.g., a workstation, server, bridge or router). RJ-45 daisy-chain ports (all port) can be cascaded to a station port on...