SMC Networks SMC7908VoWBRA2 - Manuals

Page 6 - ii

L IMITED W ARRANTY ii WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITI...

Page 7 - iii; OMPLIANCES; EC Conformance Declaration

iii C OMPLIANCES EC Conformance Declaration SMC contact for these products in Europe is: SMC Networks Europe,Edificio Conata II,Calle Fructuós Gelabert 6-8, 2o, 4a,08970 - Sant Joan Despí,Barcelona, Spain. Marking by the above symbol indicates compliance with the Essential Requirements of the R&...

Page 8 - iv

Page 11 - vii

T ABLE OF C ONTENTS vii A Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 B Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Ethernet Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-...

Page 12 - viii

Page 13 - Congratulations on your purchase of the Barricade; g Voice ADSL; About the Barricade

1-1 C HAPTER 1 I NTRODUCTION Congratulations on your purchase of the Barricade TM g Voice ADSL Router, hereafter referred to as the “Barricade”. We are proud to provide you with a powerful yet simple communication device for connecting your local area network (LAN) to the Internet. For those who wan...

Page 14 - Features and Benefits; Intergrated ADSL modem for connecting to ADSL line

I NTRODUCTION 1-2 encoding and then compression of the signal into Internet Protocol (IP) packets. The VoIP Router is equipped with a digital signal processor (DSP), which segments the voice signal into frames and stores them in voice packets. These packets are encoded using the industry standard CO...

Page 15 - Applications; Many advanced networking features are provided by the Barricade:; Wireless and Wired LAN

A PPLICATIONS 1-3 Applications Many advanced networking features are provided by the Barricade: • Wireless and Wired LAN The Barricade provides connectivity to 10/100 Mbps devices, and wireless IEEE 802.11b/g compatible devices, making it easy to create a network in small offices or homes. • Interne...

Page 16 - DMZ Host Support

I NTRODUCTION 1-4 • DMZ Host Support Allows a networked computer to be fully exposed to the Internet. This function is used when NAT and firewall security prevent an Internet application from functioning correctly. • Security The Barricade supports security features that deny Internet access to spec...

Page 17 - Package Contents

2-1 C HAPTER 2 I NSTALLATION Before installing the Barricade TM g Voice ADSL Router, verify that you have all the items listed under the Package Contents list. If any of the items are missing or damaged, contact your local distributor. Also be sure that you have all the necessary cabling before inst...

Page 18 - System Requirements; To install and connect to the Barricade, you must have:

I NSTALLATION 2-2 System Requirements To install and connect to the Barricade, you must have: • An ADSL line installed by your ISP. • An ADSL splitter (at least one). • A computer with a CD-ROM drive • Windows 2000 or later, or Mac OS 9.x. • An up to date web browser: Internet Explorer 6.0 or later,...

Page 19 - Hardware Description

H ARDWARE D ESCRIPTION 2-3 Hardware Description The Barricade contains an integrated ADSL2+ modem and connects to the Internet or to a remote site using its WAN port. This device can be connected directly to your PC or to a local area network using any of the four Fast Ethernet LAN ports. Access spe...

Page 20 - SMC7908VoWBRA2 contains the following ports on the rear panel:

I NSTALLATION 2-4 SMC7908VoWBRA2 contains the following ports on the rear panel: Figure 2-1. SMC7908VoWBRA2 Rear Panel Item Description ADSL Port Connect your ADSL line to this port. LAN Ports Fast Ethernet ports (RJ-45). Connect devices on your local area network to these ports (i.e., a PC, hub, or...

Page 21 - LED Indicators; LED

H ARDWARE D ESCRIPTION 2-5 LED Indicators The power and port LED indicators on the front panel are illustrated in the following figure and table. Figure 2-2. SMC7908VoWBRA2 Front Panel LED Status Description Power On The Barricade is receiving power. Normal operation. Off Power off or failure. ADSL ...

Page 22 - ISP Settings; ISP account user name and password

I NSTALLATION 2-6 ISP Settings Please collect the following information from your ISP before setting up the Barricade: • ISP account user name and password • VoIP setting details • Protocol, encapsulation and VPI/VCI circuit numbers • DNS server address • IP address, subnet mask and default gateway ...

Page 23 - Connect the System; Keep the Barricade away from any heating devices.; Phone/FAX Connection

C ONNECT THE S YSTEM 2-7 Connect the System The Barricade can be positioned at any convenient location in your office or home. It can also be wall-mounted. No special wiring or cooling requirements are needed. You should, however, comply with the following guidelines: • Keep the Barricade away from ...

Page 24 - Connect the Power Adapter; Choose a suitable location for the Barricade.

I NSTALLATION 2-8 Warning: Do not plug a phone jack connector into an RJ-45 port. This may damage the Barricade. Note: Use 100-ohm shielded or unshielded twisted-pair cable with RJ-45 connectors for all Ethernet ports. Category 5 cable is recommended. Make sure each twisted-pair cable length does no...

Page 25 - Connection Illustration; Figure 2-3. SMC7908VoWBRA2 Installation Diagram

C ONNECT THE S YSTEM 2-9 Connection Illustration The connection diagram shows how to connect the Barricade.For SMC7908VoWBRA2, please refer to the following diagram. Figure 2-3. SMC7908VoWBRA2 Installation Diagram

Page 27 - PC; “Windows XP” on page 3-6

3-1 C HAPTER 3 C ONFIGURING C LIENT PC After completing hardware setup by connecting all your network devices, you need to configure your computer to connect to the Barricade. See: “Windows 2000” on page 3-3 “Windows XP” on page 3-6 or “Configuring Your Macintosh Computer” on page 3-8 depending on y...

Page 28 - to access the

C ONFIGURING C LIENT PC 3-2 TCP/IP Configuration To access the Internet through the Barricade, you must configure the network settings of the computers on your LAN to use the same IP subnet as the Barricade. The default IP settings for the Barricade are: IP Address: 192.168.2.1 Subnet Mask: 255.255....

Page 29 - Click the icon that; Properties; and

W INDOWS 2000 3-3 Windows 2000 1. On the Windows desktop, click Start/Settings/Network and Dial-Up Connections . 2. Click the icon that corresponds to the connection to your Barricade. 3. The connection status screen will open. Click Properties . 4. Double-click Internet Protocol (TCP/IP) . 5. If Ob...

Page 30 - Disable HTTP Proxy; click; ENTER

C ONFIGURING C LIENT PC 3-4 Disable HTTP Proxy You need to verify that the “HTTP Proxy” feature of your web browser is disabled. This is so that your browser can view the Barricade’s HTML configuration pages. See page 3-6 for details. Obtain IP Settings from Your Barricade Now that you have configur...

Page 32 - Windows XP

C ONFIGURING C LIENT PC 3-6 Windows XP 1. On the Windows desktop, click Start/Control Panel . 2. In the Control Panel window, click Network and Internet Connections . 3. The Network Connections window will open. Double-click the connection for this device. 4. On the connection status screen, click P...

Page 33 - XP; Obtain IP Settings from Your Barricade; Command Prompt

W INDOWS XP 3-7 Obtain IP Settings from Your Barricade Now that you have configured your computer to connect to your Barricade, it needs to obtain new network settings. By releasing old DHCP IP settings and renewing them with settings from your Barricade, you can verify that you have configured your...

Page 34 - Configuring Your Macintosh Computer; Follow these instructions:; System Preferences; icon in the

C ONFIGURING C LIENT PC 3-8 Configuring Your Macintosh Computer You may find that the instructions here do not exactly match your operating system. This is because these steps and screenshots were created using Mac OS 10.2. Mac OS 7.x and above are similar, but may not be identical to Mac OS 10.2. F...

Page 35 - Using DHCP Server; Internet Explorer

C ONFIGURING Y OUR M ACINTOSH C OMPUTER 3-9 3. If Using DHCP Server is already selected in the Configure field, your computer is already configured for DHCP. If not, select this option. 4. Your new settings are shown on the TCP/IP tab. Verify that your IP address is now 192.168.2.xxx , your subnet m...

Page 36 - Uncheck all check boxes and click; OK

C ONFIGURING C LIENT PC 3-10 3. Uncheck all check boxes and click OK .

Page 37 - ADSL R; OUTER; Enter the default password:; smcadmin

4-1 C HAPTER 4 C ONFIGURING THE V OICE ADSL R OUTER After you have configured TCP/IP on a client computer, you can configure the Barricade using your web browser. To access the Barricade’s management interface, enter the default IP address of the Barricade in your web browser: http:// 192.168.2.1 . ...

Page 38 - Navigating the Management Interface; to confirm your selection.; Apply

C ONFIGURING THE V OICE ADSL R OUTER 4-2 Navigating the Management Interface The first screen of the web management is Country Selection. You need to select your country before accessing the management interface. Click OK to confirm your selection. Click Apply to continue.

Page 39 - Making Configuration Changes; APPLY

N AVIGATING THE M ANAGEMENT I NTERFACE 4-3 The Barricade’s management interface consists of a Setup Wizard and an Advanced Setup section. Setup Wizard: Use the Setup Wizard if you want to quickly set up the Barricade. Go to “SETUP WIZARD” on page 4-4. Advanced Setup: Advanced Setup supports more adv...

Page 40 - Channel and SSID; Click on; SETUP WIZARD; NEXT; NEXT; Parameter

C ONFIGURING THE V OICE ADSL R OUTER 4-4 SETUP WIZARD Channel and SSID Click on SETUP WIZARD and NEXT , then you will see the Channel and SSID screen. Click NEXT to continue. Parameter Description SSID Service Set ID. The SSID must be the same on the Barricade and all of its wireless clients. SSID B...

Page 41 - ADSL Setting; Click

S ETUP W IZARD 4-5 ADSL Setting Select your Country and Internet Service Provider. This will automatically configure the Barricade with the correct Protocol, Encapsulation and VPI/VCI settings for your ISP. If your Country or Internet Service Provider is not listed in this screen, you will need to m...

Page 42 - VoIP Setting; Configure your VoIP account settings on this screen.

C ONFIGURING THE V OICE ADSL R OUTER 4-6 VoIP Setting Configure your VoIP account settings on this screen.

Page 44 - Confirm

C ONFIGURING THE V OICE ADSL R OUTER 4-8 Confirm The Confirm screen shows a summary of the configuration parameters. Check ADSL operation mode (WAN), Network Layer Parameters (WAN), ISP parameters and VoIP settings are correct.

Page 46 - FINISH; Parameter Setting - Country or ISP Not Listed; Others

C ONFIGURING THE V OICE ADSL R OUTER 4-10 If the parameters are correct, click FINISH to save these settings. Your Barricade is now set up. Go to “Troubleshooting” if you cannot make a connection to the Internet. Parameter Setting - Country or ISP Not Listed If your Country or Internet Service Provi...

Page 47 - PPPoE; to continue to the “Confirm” settings screen.

S ETUP W IZARD 4-11 PPPoE Click NEXT to continue to the “Confirm” settings screen. Go to “Confirm” on page 4-8 in the manual for details about the settings. Parameter Description VPI/VCI Enter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) supplied by your ISP. Encapsulation ...

Page 48 - PPPoA; to continue to the “Confirm” settings page.

C ONFIGURING THE V OICE ADSL R OUTER 4-12 PPPoA Click NEXT to continue to the “Confirm” settings page. Go to “Confirm” on page 4-8 in the manual for details about the settings. Parameter Description VPI/VCI Enter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) supplied by your...

Page 52 - Bridging; Enter the Bridging settings provided by your ISP.

C ONFIGURING THE V OICE ADSL R OUTER 4-16 Bridging Enter the Bridging settings provided by your ISP. Click NEXT to continue to the “Confirm” settings page. Go to “Confirm” on page 4-8 in the manual for details about the settings. Parameter Description Management IP Address Management IP address of t...

Page 53 - Advanced Setup; Menu

A DVANCED S ETUP 4-17 Advanced Setup The left-hand side displays the main menu and the right-hand side shows descriptive information. The advanced management interface contains 16 main menu items as described in the following table. Menu Description System Sets the local time zone, the password for ...

Page 55 - SYSTEM; Time Settings; Save Settings

A DVANCED S ETUP 4-19 SYSTEM Time Settings Select your local time zone from the drop-down list. This information is used for log entries and client filtering. For accurate timing of log entries and system events, you need to set the time zone. Select your time zone from the drop-down list. If daylig...

Page 56 - Password Settings

C ONFIGURING THE V OICE ADSL R OUTER 4-20 Password Settings Use this screen to change the password for accessing the management interface. Passwords can contain from 3~12 alphanumeric characters and are case sensitive. Note: If you lost the password, or you cannot gain access to the user interface, ...

Page 57 - Remote Management; check box, and enter the IP address of the Host Address and

A DVANCED S ETUP 4-21 Remote Management By default, management access is only available to users on your local network. However, you can also manage the Barricade from a remote host by entering the IP address of a remote computer on this screen. Check the Enabled check box, and enter the IP address ...

Page 58 - WAN; ATM PVC

C ONFIGURING THE V OICE ADSL R OUTER 4-22 WAN Specify the WAN connection parameters provided by your Internet Service Provider (ISP). The Barricade supports the following modes: • ATM PVC • Clone MAC • DNS ATM PVC To configure your Internet Connection settings, select ATM PVC , then VC1 . Click the ...

Page 60 - ATM Interface

C ONFIGURING THE V OICE ADSL R OUTER 4-24 ATM Interface 1483 Bridging Enter the settings provided by your ISP. In Bridging mode the Barricade will act as a Bridge passing the IP addressing directly to the attached client PC. Parameter Description VPI/VCI Data flows are broken up into fixed length ce...

Page 64 - MAC Encapsulated Routing

C ONFIGURING THE V OICE ADSL R OUTER 4-28 MAC Encapsulated Routing Parameter Description IP Address Enter the IP address provided by your ISP. Subnet Mask Enter the subnet mask address provided by your ISP. Default Gateway Enter the gateway address provided by your ISP. VPI/VCI Enter the Virtual Pat...

Page 65 - Clone MAC Address

A DVANCED S ETUP 4-29 Clone MAC Address Some ISPs require you to register your MAC address with them. If this is the case, and you have previously registered the MAC address of another device, the MAC address of the Barricade must be changed to the MAC address that you have registered with your ISP.

Page 66 - DNS

C ONFIGURING THE V OICE ADSL R OUTER 4-30 DNS A Domain Name Server (DNS) is an index of IP addresses and Web addresses. If you type a web address into your browser, such as www.smc.com, a DNS server will find that name in its index and find the matching IP address: xxx.xxx.xxx.xxx. Most ISPs provide...

Page 67 - LAN

A DVANCED S ETUP 4-31 LAN The LAN settings menu allows you to change the default IP address of the Barricade, modify the DHCP server settings and create VLAN’s.

Page 69 - VLAN; Only interfaces of IEEE 802 bridging type (LAN ports 1-4 and; Add VLAN; to create a profile.

A DVANCED S ETUP 4-33 VLAN The Barricade’s VLAN function can be used to create up to 4 VLAN profiles. Once a VLAN profile is created interfaces can be assigned to the VLAN profile. This is done by setting the VLAN binding. Notes: Only interfaces of IEEE 802 bridging type (LAN ports 1-4 and 1483 Brid...

Page 70 - VLAN Profile

C ONFIGURING THE V OICE ADSL R OUTER 4-34 VLAN Profile Configure the VLAN settings in this screen. • Description: Enter a description for the VLAN group, for example: Admin PC’s • IP Address: Enter IP address for the VLAN. • Subnet Mask: Enter Subnet Mask address for the VLAN. • NAT Domain: Set NAT ...

Page 71 - WIRELESS; Check; Enable; and click; SAVE SETTINGS

A DVANCED S ETUP 4-35 WIRELESS The Barricade also operates as a wireless access point, allowing wireless computers to communicate with each other. To configure this function, all you need to do is enable the wireless function, define the radio channel, the SSID, and the security options. Check Enabl...

Page 73 - Access Control

A DVANCED S ETUP 4-37 Access Control Using the Access Control functionality, you can restrict access based on MAC address. Each PC has a unique identifier known as a Medium Access Control (MAC) address. With MAC filtering enabled, the computers whose MAC address you have listed in the filtering tabl...

Page 74 - Security; WPA2 Only

C ONFIGURING THE V OICE ADSL R OUTER 4-38 Security To make your wireless network safe, you should turn on the security function. The Barricade supports the following security mechanism: • WPA/WPA2 • WPA2 Only • WPA Only • WEP

Page 76 - WPA2 Only

C ONFIGURING THE V OICE ADSL R OUTER 4-40 WPA2 Only WPA2 is a product certification that is available through the Wi-Fi Alliance. WPA2 certifies that wireless equipment is compatible with the IEEE 802.11i standard. The WPA2 product certification formally replaces Wired Equivalent Privacy (WEP) and t...

Page 77 - WPA Only

A DVANCED S ETUP 4-41 WPA Only Wi-Fi Protected Access (WPA) combines temporal key integrity protocol (TKIP) and 802.1x mechanisms. It provides dynamic key encryption and 802.1x authentication service. Parameter Description Authentication Choose 802.1X or Pre-shared Key to use as the authentication m...

Page 79 - WEP; The passphrase can consist of up to 32 alphanumeric characters.

A DVANCED S ETUP 4-43 WEP If you want to use WEP to protect your wireless network, you need to set the same parameters for the Barricade and all your wireless clients. You may automatically generate encryption keys or manually enter the keys. To generate the key automatically with passphrase, check ...

Page 80 - WDS

C ONFIGURING THE V OICE ADSL R OUTER 4-44 To manually configure the encryption key, enter five hexadecimal pairs of digits for the 64-bit key, or enter 13 pairs for the 128-bit key. (A hexadecimal digit is a number or letter in the range 0-9 or A-F.) Note: WEP protects data transmitted between wirel...

Page 81 - NAT

A DVANCED S ETUP 4-45 NAT Network Address Translation allows multiple users to access the Internet sharing one public IP.

Page 82 - Address Mapping

C ONFIGURING THE V OICE ADSL R OUTER 4-46 Address Mapping Allows one or more public IP addresses to be shared by multiple internal users. This also hides the internal network for increased privacy and security. Enter the Public IP address you wish to share into the Global IP field. Enter a range of ...

Page 83 - Virtual Server

A DVANCED S ETUP 4-47 Virtual Server If you configure the Barricade as a virtual server, remote users accessing services such as web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP addresses. In other words, depending on t...

Page 84 - Special Application

C ONFIGURING THE V OICE ADSL R OUTER 4-48 Special Application Some applications require multiple connections, such as Internet gaming, video-conferencing, and Internet telephony. These applications may not work when Network Address Translation (NAT) is enabled. If you need to run applications that r...

Page 85 - NAT Mapping Table; The content of the NAT Mapping Table is described as follows.

A DVANCED S ETUP 4-49 NAT Mapping Table This screen displays the current NAPT (Network Address Port Translation) address mappings. NAT Mapping Table displays the current NAPT address mappings. The NAT address mappings are listed 20 lines per page, click the control buttons to move forwards and backw...

Page 86 - ROUTE; Static Route; Add; to add a new static route to the list, or check the box of an; Modify; will remove an

C ONFIGURING THE V OICE ADSL R OUTER 4-50 ROUTE These screens define routing related parameters, including static routes and RIP (Routing Information Protocol) parameters. Static Route Click Add to add a new static route to the list, or check the box of an already entered route and click Modify . Cl...

Page 87 - RIP

A DVANCED S ETUP 4-51 RIP Parameter Description General RIP Parameters RIP mode Globally enables or disables RIP. Auto summary If Auto summary is disabled, then RIP packets will include sub-network information from all sub-networks connected to the router. If enabled, this sub-network information wi...

Page 89 - Routing Table

A DVANCED S ETUP 4-53 Routing Table Parameter Description Flags Indicates the route status: C = Direct connection on the same subnet. S = Static route. R = RIP (Routing Information Protocol) assigned route. I = ICMP (Internet Control Message Protocol) Redirect route. Network Address Destination IP a...

Page 90 - FIREWALL; Select; and click the

C ONFIGURING THE V OICE ADSL R OUTER 4-54 FIREWALL The Barricade Router’s firewall inspects packets at the application layer, maintains TCP and UDP session information including time-outs and the number of active sessions, and provides the ability to detect and prevent certain types of network attac...

Page 91 - The following items are on the Access Control screen:

A DVANCED S ETUP 4-55 Access Control Access Control allows users to define the outgoing traffic permitted or not-permitted through the WAN interface. The default is to permit all outgoing traffic. The following items are on the Access Control screen: Parameter Description Enable Filtering Function E...

Page 92 - Add PC

C ONFIGURING THE V OICE ADSL R OUTER 4-56 To create a new access control rule: 1. Click Add PC on the Access Control screen. The Access Control Add PC screen will appear. 2. Define the appropriate settings for client PC services. 3. Click OK and then click SAVE SETTINGS to save your settings.

Page 93 - MAC Filter; You can enter up to 32 MAC addresses in this table.

A DVANCED S ETUP 4-57 MAC Filter The MAC Filter allows you to define what client PC’s can access the Internet. When enabled only the MAC addresses defined in the MAC Filtering table will have access to the Internet. All other client devices will be denied access. You can enter up to 32 MAC addresses...

Page 94 - URL Blocking; You can define up to 30 sites here.

C ONFIGURING THE V OICE ADSL R OUTER 4-58 URL Blocking The Barricade allows the user to block access to web sites by entering either a full URL address or just a keyword. This feature can be used to protect children from accessing violent or pornographic web sites. You can define up to 30 sites here...

Page 95 - Schedule Rule

A DVANCED S ETUP 4-59 Schedule Rule You may filter Internet access for local clients based on rules. Each access control rule may be activated at a scheduled time. Define the schedule on the Schedule Rule screen, and apply the rule on the Access Control screen.

Page 96 - Add Schedule Rule

C ONFIGURING THE V OICE ADSL R OUTER 4-60 Follow these steps to add a schedule rule: 1. Click Add Schedule Rule on the Schedule Rule screen. The Edit Schedule Rule screen will appear. 2. Define the appropriate settings for a schedule rule. 3. Click OK and then click SAVE SETTINGS to save your settin...

Page 97 - Intrusion Detection; Scroll down to view more information.

A DVANCED S ETUP 4-61 Intrusion Detection • Intrusion Detection Feature Stateful Packet Inspection (SPI) and Anti-DoS firewall protection (Default: Enabled) — The Intrusion Detection Feature of the Barricade Router limits access for incoming traffic at the WAN port. When the SPI feature is turned on...

Page 99 - Stateful Packet Inspection

A DVANCED S ETUP 4-63 • Stateful Packet Inspection This is called a “stateful” packet inspection because it examines the contents of the packet to determine the state of the communications; i.e., it ensures that the stated destination computer has previously requested the current communication. This...

Page 100 - Connection

C ONFIGURING THE V OICE ADSL R OUTER 4-64 • Connection Policy Enter the appropriate values for TCP/UDP sessions as described in the following table. Parameter Defaults Description Fragmentation half-open wait 10 sec Configures the number of seconds that a packet state structure remains active. When ...

Page 102 - DMZ

C ONFIGURING THE V OICE ADSL R OUTER 4-66 DMZ If you have a client PC that cannot run an Internet application properly from behind the firewall, you can open the client up to unrestricted two-way Internet access. Enter the IP address of a DMZ (Demilitarized Zone) host on this screen. Adding a client...

Page 103 - SNMP

A DVANCED S ETUP 4-67 SNMP Use the SNMP configuration screen to display and modify parameters for the Simple Network Management Protocol (SNMP).

Page 104 - Up to five community names may be entered.

C ONFIGURING THE V OICE ADSL R OUTER 4-68 Community A computer attached to the network, called a Network Management Station (NMS), can be used to access this information. Access rights to the agent are controlled by community strings. To communicate with the Barricade, the NMS must first submit a va...

Page 105 - Trap; Parameter Description

A DVANCED S ETUP 4-69 Trap Specify the IP address of the NMS to notify when a significant event is detected by the agent. When a trap condition occurs, the SNMP agent sends an SNMP trap message to any NMS specified as a trap receiver. Parameter Description IP Address Traps are sent to this address w...

Page 106 - ADSL; ADSL Parameters

C ONFIGURING THE V OICE ADSL R OUTER 4-70 ADSL ADSL (Asymmetric Digital Subscriber Line) is designed to deliver more bandwidth downstream (from the central office to the customer site) than upstream. This section is used to configure the ADSL operation type and shows the ADSL status. ADSL Parameters...

Page 107 - ADSL Status

A DVANCED S ETUP 4-71 ADSL Status The Status screen displays information on connection line status, data rate, operation data and defect indication, and statistics.

Page 108 - The following items are included on this information screen:

C ONFIGURING THE V OICE ADSL R OUTER 4-72 The following items are included on this information screen: Parameter Description Status Line Status Shows the current status of the ADSL line connection. Data Rate Upstream Maximum upstream data rate. Downstream Maximum downstream data rate. Operation Data...

Page 109 - VoIP; VoIP Account

A DVANCED S ETUP 4-73 VoIP Voice over Internet Protocol (VoIP) is the routing of voice conversations over the Internet or any other IP-based network. The voice data flows over a general-purpose packet-switched network, instead of traditional dedicated, circuit-switched voice transmission lines. VoIP...

Page 113 - VoIP Extensions; You can configure the Line and Phone port settings on this screen.

A DVANCED S ETUP 4-77 VoIP Extensions You can configure the Line and Phone port settings on this screen. Parameter Description Telephony Tone Country Setting Configures telephony tone set for the selected country. Extension Number Select Extension Number to assign to the phone. This should be your V...

Page 115 - SIP Setting; The following SIP related parameters are configurable.

A DVANCED S ETUP 4-79 SIP Setting The following SIP related parameters are configurable. Parameter Description SIP Parameters SIP Listen Port This option allows you to change the default SIP Listen Port. The default setting is 5060. It is recommended to leave this value unchanged. Codec Rate(G723, G...

Page 116 - Port Advanced Setting

C ONFIGURING THE V OICE ADSL R OUTER 4-80 Port Advanced Setting There are 11 advanced functions that can be configured in this screen. • Volume Gain Control: Two modes are available. The fixed gain control means the device is supported to supply a constant level of amplification. The adaptive mode m...

Page 117 - Inter Digit Delay

A DVANCED S ETUP 4-81 • PLC (Packet Loss Compensation): During the transmission of a series of packets, if one of them is lost, then the device will use the mathematical algorithm to calculate a value to make up the lost packet. This function is designed to make the voice conversation more smooth. •...

Page 119 - Dialing plans

A DVANCED S ETUP 4-83 Dialing plans Dialing plans allow you to define the connection type used when a specified number is dialed. For example you may want numbers beginning “0800” to dial out over PSTN. Alternatively you may want numbers beginning “012” to dial out over the Internet (VoIP). Also you...

Page 121 - Quick Dialing Plans

A DVANCED S ETUP 4-85 Quick Dialing Plans This function allows you to configure up to 20 quick dialing plans. This is done by assigning a quick dial code for a specified phone number. • Quick Dial Code: Enter quick dial code in the range of 01 to 20. To call the phone number associated with the quic...

Page 122 - Enter the number “01” for the Quick Dial Code.; This Quick Dial Plan will then allow you to call Frank by either:

C ONFIGURING THE V OICE ADSL R OUTER 4-86 The following example shows how to set up a quick dialing plan for Frank who has the phone number 6194621719: 1. Select the vanity keypad style from the pull-down menu. 2. Enter the number “01” for the Quick Dial Code. 3. Enter the name “Frank” in the Vanity...

Page 123 - VoIP Status and Call logs; Click the; Refresh; button to update the status and log.

A DVANCED S ETUP 4-87 VoIP Status and Call logs This page displays the VoIP registration status for accounts 1 - 4 and the call logs. Click the Refresh button to update the status and log. Parameter Description Account SIP accounts 1 to 4. SIP URL Displays SIP URL for the corresponding account. Regi...

Page 124 - UPnP; UPnP allows the device to automatically:; radio button to activate this function.

C ONFIGURING THE V OICE ADSL R OUTER 4-88 UPnP The Universal Plug and Play architecture offers pervasive peer-to-peer network connectivity of PCs of all form factors, intelligent appliances, and wireless devices. UPnP enables seamless proximity network in addition to control and data transfer among ...

Page 125 - QoS

A DVANCED S ETUP 4-89 QoS The QoS (Quality of Service) function allows you to differentiate VoIP traffic and provide it with high-priority forwarding service. In addition, you can specify the outgoing VC of VoIP packets to further guarantee the voice quality. Parameter Description Enable or disable ...

Page 126 - Assured forwarding, defined in RFC 2597; Traffic Mapping

C ONFIGURING THE V OICE ADSL R OUTER 4-90 • Assured forwarding, defined in RFC 2597 • Expedited forwarding, defined in RFC 2598 Traffic Mapping Use this screen to classify traffic into Diffserv forwarding groups and outgoing VCs.

Page 127 - To create a new traffic class:; ADD TRAFFIC CLASS; on the Edit Traffic Class screen.; to save your settings.

A DVANCED S ETUP 4-91 To create a new traffic class: 1. Click ADD TRAFFIC CLASS on the Edit Traffic Class screen. 2. Define the appropriate settings for traffic class. 3. Click SAVE SETTINGS to save your settings.

Page 128 - Traffic Statistics

C ONFIGURING THE V OICE ADSL R OUTER 4-92 Traffic Statistics This screen shows the WAN outbound traffic statistics of all the Diffserv forwarding groups in the last 12 hours.

Page 129 - DDNS

A DVANCED S ETUP 4-93 DDNS Dynamic Domain Name Service (DDNS) provides users on the Internet with a method to tie their domain name to a computer or server. DDNS allows your domain name to follow your IP address automatically by having your DNS records changed when your IP address changes. This DNS ...

Page 130 - TOOLS; Ping Utility

C ONFIGURING THE V OICE ADSL R OUTER 4-94 TOOLS Use the Tools menu to backup the current configuration, restore a previously saved configuration, update firmware, and reset the Barricade. Ping Utility This tool allows you to test your network connection. You can specify a domain name or a valid IP a...

Page 131 - Configuration Tools; Choose a function and click; Next

A DVANCED S ETUP 4-95 Configuration Tools Choose a function and click Next . • Backup Router Configuration: this allows you to save the Barricade’s configuration to a file. • Restore from saved Configuration file: this function is used to restore the previously saved backup configuration file. • Res...

Page 132 - Firmware Upgrade; to look for the downloaded file. Click; BEGIN

C ONFIGURING THE V OICE ADSL R OUTER 4-96 Firmware Upgrade Use this screen to update the firmware or user interface to the latest versions. 1. Download the upgrade file from the SMC web site first, and save it to your hard drive. 2. Then click Browse... to look for the downloaded file. Click BEGIN U...

Page 133 - Reset; REBOOT ROUTER; to reset the Barricade. The reset will be

A DVANCED S ETUP 4-97 Reset Click REBOOT ROUTER to reset the Barricade. The reset will be complete when the power LED stops blinking. If you perform a reset from this screen, the configurations will not be changed back to the factory default settings. Note: If you use the Reset button on the back pa...

Page 134 - STATUS; Save; and choosing a location.

C ONFIGURING THE V OICE ADSL R OUTER 4-98 STATUS The Status screen displays WAN/LAN connection status, firmware, and hardware version numbers, illegal attempts to access your network, as well as information on DHCP clients connected to your network. The security log may be saved to a file by clickin...

Page 135 - The following items are included on the Status screen:

A DVANCED S ETUP 4-99 The following items are included on the Status screen: Parameter Description INTERNET Displays WAN connection type and status. Release Click on this button to disconnect from the WAN. Renew Click on this button to establish a connection to the WAN. GATEWAY Displays system IP se...

Page 136 - Finding the MAC address of a Network Card; The MAC address is listed as the “Physical Address.”; MACINTOSH; The MAC address is listed as the “Ethernet Address” on the TCP/IP tab.; LINUX; The MAC address is the value after the word “HWaddr.”

C ONFIGURING THE V OICE ADSL R OUTER 4-100 Finding the MAC address of a Network Card WINDOWS NT4/2000/XP Click Start/Programs/Command Prompt. Type “ipconfig /all” and press “ENTER”. The MAC address is listed as the “Physical Address.” MACINTOSH Click System Preferences/Network. The MAC address is li...

Page 137 - Troubleshooting Chart

A-1 A PPENDIX A T ROUBLESHOOTING This section describes common problems you may encounter and possible solutions to them. The Barricade can be easily monitored through panel indicators to identify problems. Troubleshooting Chart Symptom Action LED Indicators Power LED is Off • Check connections betw...

Page 141 - Ethernet Cable; Specifications; Cable Types and Specifications

B-1 A PPENDIX B C ABLES Ethernet Cable Caution: DO NOT plug a phone jack connector into any RJ-45 port. Use only twisted-pair cables with RJ-45 connectors that conform with FCC standards. Specifications Wiring Conventions For Ethernet connections, a twisted-pair cable must have two pairs of wires. E...

Page 142 - RJ-45 Port Connection; Attached Device Port Type

C ABLES B-2 Each wire pair must be attached to the RJ-45 connectors in a specific orientation. The following figure illustrates how the pins on an Ethernet RJ-45 connector are numbered. Be sure to hold the connectors in the same orientation when attaching the wires to the pins. Figure B-1. RJ-45 Eth...

Page 143 - Pin Assignments; Straight-Through Wiring; RJ-45 Pin Assignments; Straight-Through Cable Pin Assignments

E THERNET C ABLE B-3 Pin Assignments With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and pins 3 and 6 for receiving data. Straight-Through Wiring If the port on the attached device has internal crossover wiring (MDI-X), then use straight-through cable. RJ-45 Pin Assignme...

Page 144 - Crossover Wiring; Crossover Cable Pin Assignments

C ABLES B-4 Crossover Wiring If the port on the attached device has straight-through wiring (MDI), use crossover cable. Crossover Cable Pin Assignments End 1 End 2 1 (Tx+) 3 (Rx+) 2 (Tx-) 6 (Rx-) 3 (Rx+) 1 (Tx+) 6 (Rx-) 2 (Tx-)

Page 145 - ADSL C; ADSL Cable; Do not plug a phone jack connector into an RJ-45 port.

ADSL C ABLE B-5 ADSL Cable Use standard telephone cable to connect the RJ-11 telephone wall outlet to the RJ-45 ADSL port on the ADSL Router. Caution: Do not plug a phone jack connector into an RJ-45 port. Specifications Wiring Conventions For ADSL connections, a cable requires one pair of wires. Ea...

Page 146 - Pin

C ABLES B-6 Figure B-3. RJ-11 Pinouts Pin Signal Name Wire Color 1 Not used 2 Line 2 Tip Black or White/Orange 3 Line 1 Ring Red or Blue/White 4 Line 1 Tip Green or White/Blue 5 Line 2 Ring Yellow or Orange/White 6 Not used 1 2 3 4 5 6 Blue/White White/Blue R1 T1 1 2 3 4 5 6 Red Green R1 T1 R2 T2 Bl...

Page 147 - ADSL Features; upstream; ATM Features

C-1 A PPENDIX C S PECIFICATIONS Physical CharacteristicsPorts Four 10/100Mbps RJ-45 portsOne ADSL RJ-11 portTwo Phone portsOne Line port ADSL Features Supports DMT line modulationSupports Annex A Full-Rate ADSL: up to 8 Mbps downstream, up to 1 Mbps upstream (G.992.1 &T1.413, Issue 2) and ADSL2 ...

Page 149 - Operating Channels IEEE 802.11b compliant:

S PECIFICATIONS C-3 Operating Channels IEEE 802.11b compliant: 11 channels (US, Canada)13 channels (ETSI)2 Channels (Spain)4 Channels (France)14 channels (Japan) Operating Channels IEEE 802.11g compliant: 13 channels (US, Canada, Europe, Japan) RF Output Power Modulation Rate-Output Power (dBm) 802....

Page 150 - Humidity; CE; Safety

S PECIFICATIONS C-4 Modulation Rate-Receiver Sensitivity Typical (dBm) 802.11g - 6Mbps -88802.11g - 9Mbps -87802.11g - 12Mbps -84802.11g - 18Mbps -82802.11g - 24Mbps -79802.11g - 36Mbps -75802.11g - 48Mbps -68802.11g - 54Mbps -68 Temperature: IEC 68-2-14 0 to 50 degrees C (Standard Operating)-40 to ...