Page 6 - ii
L IMITED WARRANTY ii WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIO...
Page 7 - iii; OMPLIANCES
iii C OMPLIANCES FCC - Class A This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computi...
Page 8 - iv; EC Conformance Declaration - Class A
C OMPLIANCES iv EC Conformance Declaration - Class A SMC contact for these products in Europe is: SMC Networks Europe,Edificio Conata II,Calle Fructuós Gelabert 6-8, 2 o , 4 a , 08970 - Sant Joan Despí,Barcelona, Spain. This information technology equipment complies with the requirements of the Coun...
Page 9 - Industry Canada - Class A
C OMPLIANCES v Industry Canada - Class A This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of Communications. Cet appareil numér...
Page 11 - vii; ABLE
vii T ABLE OF C ONTENTS Description of Hardware . . . . . . . . . . . . . . . . . . . . . . . . 1 Installing the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Equipment Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Handling the Modules . . . . . . . . . ...
Page 12 - viii
Page 13 - Gigabit Port LEDs; Extender Module LEDs
1 D ESCRIPTION OF H ARDWARE SMC’s TigerSwitch™ Gigabit Extender Module provides a Gigabit fiber port that can be used for a high-speed backbone or server connection. The SMC6724L2GSSC contains one 1000BASE-SX multimode fiber port that can be connected to a site up to 550 m (1805 ft) away. The SMC672...
Page 15 - Equipment Checklist
3 I NSTALLING THE M ODULE CAUTION: The SMC6724L2GSSC and SMC6724L2GLSC modules are designed for the SMC6724L2 and SMC6724L3. These modules may only be installed in these switches. Do not try to install them in any other TigerSwitch units. Contact your distributor for advice on newly released switche...
Page 16 - Handling the Modules; CAUTION
I NSTALLING THE M ODULE 4 Handling the Modules CAUTION: The modules can easily be damaged by electrostatic discharge. To prevent electrostatic damage, observe the following guidelines: • Do not remove the module from its packaging until you are ready to install it. • Do not touch any of the module’s...
Page 17 - Remove the installed module or faceplate:; Insert the new module into the switch:
I NSTALLING THE M ODULE 5 4. Remove the installed module or faceplate: Firmly pull on the screws until the module is free of the switch. Carefully slide the module straight out of the slot. Keep the original faceplate for future use. If you should remove the module, replace the faceplate to prevent ...
Page 18 - Secure the new module:; Connect the network cable:
I NSTALLING THE M ODULE 6 6. Secure the new module: Secure the new module in place by screwing the attached screws clockwise into the switch’s chassis. Tighten them enough to secure the module, but not so tight as to prevent them from being unscrewed by hand. 7. Connect the network cable: Connect fi...
Page 19 - ROUBLESHOOTING
7 T ROUBLESHOOTING If you experience any problems with the module, check the following items before contacting SMC Technical Support: • Ensure that the switch with the Gigabit Extender Module is powered up. • Ensure that the device attached to the module is powered up and operating correctly. • Ensu...
Page 21 - ABLES; Cable Specifications
9 C ABLES Cable Specifications Cable Types and Specifications Cable Type Max. Length Connector 1000BASE-SX 50/125 or 62.5/125 micron core multimode fiber (MMF) See the following table SC or ST 1000BASE-LX 9/125 micron core single-mode fiber (SMF) 5 km (16,404 ft) SC 1000BASE-SX Fiber Specifications ...
Page 23 - PECIFICATIONS; TigerSwitch Gigabit Uplink Modules; General
11 S PECIFICATIONS TigerSwitch Gigabit Uplink Modules General Communication Mode Full duplex, auto-negotiation for flow control Communication Rate 1000 Mbps LED Indicators Status - one per module Size 7.2 x 9.1 x 2.4 cm (2.83 x 3.58 x 0.94 in.) Power Consumption 4 W maximum Temperature Operating: 0 ...
Page 24 - Warranty; Ports
S PECIFICATIONS 12 Industry Canada Class AEN55022 (CISPR 22) Class AEN 61000-3-2/3C-Tick - AS/NZS 3548 (1995) Class A Immunity EN 61000-4-2/3/4/5/6/8/11 Warranty Limited Lifetime SMC6724L2GSSC Ports 1 1000BASE-SX Network Interface SC connector: 62.5/125 or 50/125 micron multimode fiber cable SMC6724...