SMC Networks SMC2670W - Manuals

SMC Networks SMC2670W – Manual in PDF format online.

Manuals:

Manual

Manual SMC Networks SMC2670W

Summary

1 Copyright Information furnished by SMC Networks. (SMC) is believedto be accurate and reliable. However, no responsibility isassumed by SMC for its use, nor for any infringements ofpatents or other rights of third parties, which may result fromits use. No license is granted by implication or otherw...

Page 4 - Compliances; FCC Class B; from that to which the receiver is connected.

2 Compliances FCC Class B This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. Thisequipment generates...

Page 7 - Minimum Requirements:

9 The EZ Connect Wireless Ethernet Adapter package includes the following: • One EZ Connect™ 2.4GHz 11 Mbps Wireless Ethernet Adapter • One CD containing EZ Installation Wizard, Utility Software and Complete Documentation • One Power Adapter• One CAT 5 Crossover Cable• One Manual Minimum Requirement...

Page 8 - Section 1 | Getting Started; Site Location; Do not connect this adapter directly to the LAN; Connect the Power Cable

10 Section 1 | Getting Started Site Location Choose a location for your EZ Connect Wireless EthernetAdapter. Usually, the best location is at the center of your wireless coverage area, and if possible within line-of-sight ofyour main wireless broadcast device, such as an Access Point or a Wireless R...

Page 9 - | Wireless Ethernet Adapter LED Indicators; Light

11 1.1 | Wireless Ethernet Adapter LED Indicators The preceding diagram shows the location of all ports, jacks,controls, and LED indicator lights on the EZ Connect 11 MbpsWireless Ethernet Adapter. The Wireless Ethernet Adapter contains 1 external antenna, which is adjustable for best wireless recep...

Page 10 - | Resetting the Wireless Ethernet Adapter

12 1.2 | Resetting the Wireless Ethernet Adapter To reset the SMC2670W Wireless Ethernet Adapter or to correcttemporary connectivity problems, follow the steps outlinedbelow: 1. Locate the [Default] button on the back of the EZ Connect Wireless Ethernet Adapter. 2. Unplug the power from the back of ...

Page 18 - Section 4 | Accessing the SMC2670W; The Utility will search your network for the EZ Connect

20 Section 4 | Accessing the SMC2670W The EZ Connect Wireless Ethernet Adapter can be configuredand managed using two different utilities. Each utility providesthe same functionality. • SMC2670W Windows Utility• SMC2670W Web-based Utility 4.1 | Using the Windows Utility 1. Click [Start] , then [Prog...

Page 21 - Section 5 | Configure; Note: If you are using a Barricade Wireless Broadband Router; | Configure the Wireless Ethernet Adapter; “INFO”; page displays. To change your settings click the

23 Section 5 | Configure The EZ Connect Wireless Ethernet Adapter functions as a trans-parent device on your network by not requiring an IP addressthat is within the same subnet as your network. The steps out-lined below will guide you through the wireless settings andTCP/IP configuration. Note: If ...

Page 23 - for more information)

25 5.2 | Configure the Wireless Ethernet Adapter using Web-based Utility 1. Log into the SMC2670W Web-based Utility. (see section 4.2 for more information) 2. Click on [Configuration] section link and then click the [Setup] link. From this section, you can configure the following settings: • SSID • ...

Page 28 - Section 7 | Wireless Ethernet Adapter Information; About; the SMC2670W is connected to.

30 Section 7 | Wireless Ethernet Adapter Information Both the Windows Utility and Web-based Utility provide infor-mation about the EZ Connect Wireless Ethernet Adapter. Theinformation below outlines the information, which can befound in both utilities: Windows Utility: About • MAC Address• Firmware ...

Page 32 - Section 8 | Upgrading the SMC2670W; Scan and log into the SMC2670W on your network.

34 Section 8 | Upgrading the SMC2670W The EZ Connect Wireless Ethernet Adapter has a speciallydesigned Windows Utility to upgrade firmware. Before youattempt this process, please verify that you have the latestfirmware available from http://www.smc.com. 1. Click [Start] , then [Programs] , choose [S...

Page 34 - Wireless Adapter Utility]; To complete the uninstall process, when prompted by the

36 Section 9 | Uninstalling the SMC2670W Windows Utility If you need to uninstall the EZ Connect Wireless EthernetAdapter Utility, please follow the steps below: 1. Click [Start] , then [Programs] , choose [SMC2670 Wireless Adapter Utility] , and then select [Uninstall SMC2670W Wireless Adapter Util...

Page 35 - Section 10 | Technical Specifications

37 Standards • IEEE802.11b • IEEE802.3 (10BaseTX) Management • Windows-Based • Web-Based Security • 64-bit/128-bit WEP encryp-tion LAN • 1 *10BaseT RJ-45 LAN port LED • Power• Wireless • Ethernet Antenna • External Dipole Antenna Power Supply • DC 5V Operating Frequency • America/FCC: 2.412~ 2.462 G...

Page 36 - Section 11 | Troubleshooting; I can’t connect to the Wireless Ethernet Adapter to my

38 Section 11 | Troubleshooting This section provides possible solutions to issues regarding theinstallation and operation of your EZ Connect WirelessEthernet Adapter. If the solution you are looking for is not listedhere, please visit SMC Networks web site at www.smc.com. Before you begin troublesh...

Page 37 - I don’t know how to change the SMC2670W’s IP address.; section link, and then click on the

39 If you are still unable to get a wireless connection after verify-ing the settings listed above, then try to move the WirelessEthernet Adapter closer to your Wireless BroadbandRouter/Access Point. If the SMC2670W connects when you move it closer to theWireless Broadband Router/Access Point then y...

Page 40 - Section 12 | Glossary; Dynamic IP Address -

42 Section 12 | Glossary 802.11 - 802.11 refers to a family of specifications developed by the IEEE for wireless LAN technology. 802.11 specifies anover-the-air interface between a wireless client and a base sta-tion or between two wireless clients. The IEEE accepted thespecification in 1997. 802.11...

Page 42 - Roaming –

44 within a small geographic area (for example, within an officebuilding). MAC Address - Short for Media Access Control address, a hard- ware address that uniquely identifies each node of a network.In IEEE 802 networks, the Data Link Control (DLC) layer of theOSI Reference Model is divided into two ...

Page 45 - IMITED

SMC's Limited Warranty Statement Limited Warranty Statement: SMC Networks Europe ("SMC") warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 2 year limited warranty from ...

Page 46 - ii

WARRANTIES EXCLUSIVE: IF A SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER'S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESSED OR IMPLI...

Page 47 - iii

Full Installation Manual Full installation manuals are provided on the Installation CD-Rom. Manuals in other languages than those included on the CD-Rom are provided on www.smc-europe.com (section support). Firmware and Drivers For latest driver, technical information and bug-fixes please visit www....