Page 3 - acquire the device at a future date.; CONTENT
- 1 - Read these operating instructions carefully before using the device for the first time and preserve this booklet for later reference. Pass this booklet on to whoever might acquire the device at a future date. CONTENT PAGE Intended Use 2 Contents 2Technical data 3 Safety instructions 3 The devi...
Page 5 - Technical data; Transmitter connections:; Safety instructions; Risk of electric shocks!
- 3 - Technical data Power supply: Transmitter 9 V / 300 mA Receiver 9 V / 300 mA Manufacturer HON-KWANG ELECTRIC CO., LTD Model number: HKA-0930EC-230K Input: 230 V ~/ 50 Hz, 35 mA, 9 W Output : 9 V , 300mA 2,7 VA Protection class: II / Transmitter connections: • 9 V Supply voltage • 2 x Audio/Vide...
Page 6 - Risk of suffocation!
- 4 - Do not operate the device if a mains • adapter, the adapter's power cable or the device itself is damaged. Arrange for a defective mains adapter to be repaired or replaced as soon as pos- sible by Customer Services. You are not permitted to open the • housing of the radio transmission set or t...
Page 9 - Infrared connection
- 7 - Note: Observe the colour coding: The white CINCH plug carries the left > audio channel signal and belongs in the white CINCH socket. The red CINCH plug carries the right > audio channel signal and belongs in the red CINCH socket. The yellow CINCH plug carries the > video signal and be...
Page 10 - the
- 8 - For the sound transmissions use, if neces- sary, the AUDIO adapter 3,5 mm jack on CINCH sockets 2$ , which you connect to the output of the sound card if this has no cinch output. The yellow plug of the CINCH—3,5mm jack cable 2) you con- nect to the video card's video output. Tips: The video c...
Page 11 - Transmitter; Cleaning; Risk of electric shock!; Troubleshooting; No audio/video transmission
- 9 - Improving the transmission quality You can try the following measures to im- prove the quality in event of transmission disruptions: Change the position and/or direction • of the transmitter q and/or receiver d . For problems with the remote control • signal quality change the position of the ...
Page 12 - Poor transmission quality; Disposal
- 10 - Check the CINCH and AV connec- > tions on the connected devices as well as on the transmitter q and the receiver d . If you are using other radio devices > (same frequency), this may result in disruptions. It may also affect the range of the radio transmission set.The signal source must...
Page 13 - Important warranty information
- 11 - Important warranty information You receive a 3-year warranty for this device as of the purchase date. Should you, in spite of our high quality stand- ards, have grounds for complaint please contact our Service Hotline. In the event that processing of your complaint is not possible by telephon...