Sigma EF-530 - Manuals - manualsarea.com

Page 2 - DESCRIPTION OF THE PARTS; EXTERNAL PARTS; CAMERA MODELS AND FUNCTIONS; AUTO POWER OFF

15 DESCRIPTION OF THE PARTS EXTERNAL PARTS 1.Flash Head 2.Built-in Wide Panel 3.AF Auxiliary Light 4.Bounce Angle; Up and Down 5.Bounce Angle; Right and Left 6.Bounce Lock and Release Button; Up and Down 7.Swivel Lock and Release Button; Right and Left 8.LCD Panel 9.Battery Cover 10.Shoe Ring 11.Sho...

Page 3 - LCD PANEL ILLUMINATION

16 If it still blinks after this procedure, check the battery power. ADJUSTING THE FLASH HEAD Depress the Bounce “Up and Down” Lock and Release Button and adjust the flash head to the desired position. ◆ If appears on the LCD panel when you turn on the flash, and if this mark blinks, then the flash...

Page 4 - Shutter Speed Priority Setting; LIMITS OF CONTINUOUS SHOOTING; MANUAL FLASH OPERATION

17 2. Turn on the power switch of the flash, the ETTL (TTL) mark will appear on the LCD panel and the flash will start charging. 3. Focus on your subject. 4. Check that the subject is located within the effective distance range indicated on the LCD panel. 5. Press the shutter button, after the flash...

Page 5 - SECOND CURTAIN SYNCHRONIZATION

18 5. The manual flash output display will stop blinking and remain displayed after you press the SEL button again. 6. Adjust the focusing by pressing the shutter button, note the subject distance on the focus ring on the lens. Then adjust the lens’ aperture value or flash power level until the dist...

Page 6 - FE LOCK; MODELING FLASH

19 FE LOCK “FE” lock mode allows you to choose and lock the exposure before taking the picture. 1. Set the camera’s exposure mode (“P”, “Tv”, “Av”, “M” or “DEP”). 2. Set the flash’s mode to the E-TTL or the High Speed Sync. 3. Focus on the subject 4. Focus on the subject in the center AF frame of th...

Page 8 - Wireless ETTL Autoflash; Preparation for Wireless Flash

21 Channel Setting When other people are using Wireless Flash mode near you, your flash may be connected with the other person’s flash and your flash may fire. In this circumstance, please set a different channel for your flash from that of the other person’s . Channel setting for Master unit 1. Pre...

Page 9 - Slave ID, Wireless ETTL Autoflash With Flash Ratio (Two Slave Units); Wireless High-Speed Sync (FP Flash)

22 ◆ If the flash ratio is indicated as or , press the + or - button until 1:1 is displayed. 4. Place the Slave Unit at the desired position. 5. Make sure that the Master Unit and Slave Unit have both been charged. ◆ Master Unit’s Ready Light is lit and Slave Unit’s AF Auxiliary Light is blinkin...

Page 10 - Changing the Wireless Mode; Wireless Manual Flash With Uniform Flash Output; Wireless Manual Flash With Varied Flash Output

23 Wireless Flash Exposure Compensation 1. Please set master flash unit to the Wireless Flash Mode. 2. Press the SEL button to make mark blink. 3. Press the + or - button to set the flash exposure compensation amount. 4. Press the SEL button several times to make exposure compensation indicator appe...

Page 11 - Wireless Multi Flash; Slave Flash; Normal Slave Flash

24 ◆ If there are only two slave units, please select the indicator at step 3 ( step 9 and step 10 should be omitted). Wireless Multi Flash Set the master flash unit as follows. 1. Follow the procedure for Changing the Wireless Mode , and set to the MULTI ／ mark. 2. Press the SEL button to make the ...

Page 12 - Designated Slave Flash; SPECIFICATIONS

25 Designated Slave Flash If using two or more EF-530 DG Super flash units, you can designate which flash will fire together by using the channel settings. In this mode, one flash unit will be used as the Slave Controller and the others for firing as Slaves. Setting the Slave Flash unit(s) for firin...