SEAGATE ST4000VM000 - Manuals

SEAGATE ST4000VM000 – Manual in PDF format online.

Manuals:

Manual

Manual SEAGATE ST4000VM000

Summary

Page 2 - Document Revision History; Revision; Added to the feature list updated specifications.

© 2013 Seagate Technology LLC. All rights reserved. Publication number: 100633414, Rev. H May 2013 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Pipeline HD and SeaTools are either trademarks or register...

Page 3 - Contents

Video 3.5 HDD Product Manual, Rev. H Contents Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 5 - Figures; Figure 1

Video 3.5 HDD Product Manual, Rev. H Figures Figure 1 Typical Current Profiles (5V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Figure 2 Typical Current Profiles (12V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 7 - Seagate Technology Support Services

Video 3.5 HDD Product Manual, Rev. H 7 For information regarding online support and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Service ...

Page 9 - About the Serial ATA Interface

Video 3.5 HDD Product Manual, Rev. H 9 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Video 3.5 HDD (formerly Pipeline HD ® )SATA model drives: These drives provide the following key features: • 5900 RPM spindle speed • High...

Page 11 - Drive Specifications; the drive; Specification summary tables; Drive Specification; kFCI

Video 3.5 HDD Product Manual, Rev. H 11 2.0 Drive Specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models:...

Page 12 - Drive Specifications

12 Video 3.5 HDD Product Manual, Rev. H Drive Specifications www.seagate.com * One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. * *During periods of drive idle, som...

Page 13 - Formatted capacity; Default logical geometry

Video 3.5 HDD Product Manual, Rev. H 13 www.seagate.com Drive Specifications 2.2 Formatted capacity * One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mod...

Page 14 - Physical characteristics; Note; Read Write Read Write

14 Video 3.5 HDD Product Manual, Rev. H Drive Specifications www.seagate.com 2.5 Physical characteristics Maximum height 2TB model 26.1mm / 1.028 in 1TB model 20.20mm / 0.795 in Maximum width 101.6mm / 4.0 in (± 0.010 in) Maximum length 147.00mm / 5.78 in Typical weight 2TB model 535g / 1.18 lb 1TB ...

Page 15 - Power specifications; Figure 3; Avg 5V typ amps

Video 3.5 HDD Product Manual, Rev. H 15 www.seagate.com Drive Specifications 2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. (Refer to Figure 3 ). 2.8.1 Power consumption Power requirements for the drives are listed in Table 2 on page 15 . Ty...

Page 17 - mands and returns to Active mode any time disk access is necessary.; Power modes

Video 3.5 HDD Product Manual, Rev. H 17 www.seagate.com Drive Specifications 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12V line or an equivalent 15-ohm resistive load on the +5V line. • Using 12V power, the...

Page 18 - Environmental specifications; Figure 4; Relative humidity

18 Video 3.5 HDD Product Manual, Rev. H Drive Specifications www.seagate.com 2.9 Environmental specifications 2.9.1 Drive case temperature This section provides the temperature, humidity, shock, and vibration specifications. Ambient temperature is defined as the temperature of the environment immedi...

Page 19 - Operating shock

Video 3.5 HDD Product Manual, Rev. H 19 www.seagate.com Drive Specifications 2.9.5 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.9.5.1 Operating shock These drives comp...

Page 20 - Model; Electromagnetic immunity; Seek; Test; Surge immunity ± 1 kV differential, ± 2 kV common, AC mains

20 Video 3.5 HDD Product Manual, Rev. H Drive Specifications www.seagate.com 2.10 Acoustics Table 4 Fluid Dynamic Bearing (FDB) motor acoustics Model 2.1 bels (typ) 2.3 bels (max) 2.3 bels (typ) 2.4 bels (max) 1.9 bels (typ) 2.1 bels (max) 2.2 bels (typ) 2.3 bels (max) Drive acoustics are measured a...

Page 21 - Reliability - Annualized Failure Rate; Korean RRL

Video 3.5 HDD Product Manual, Rev. H 21 www.seagate.com Drive Specifications 2.12 Reliability - Annualized Failure Rate The product will achieve an Annualized Failure Rate (AFR) of 0.55% when operated in an environment of ambient air temperatures of 25°C. Operation at temperatures outside the specif...

Page 22 - radio and television reception.; Radio and television interference.; • Reorient the receiving antenna.; Environmental protection

22 Video 3.5 HDD Product Manual, Rev. H Drive Specifications www.seagate.com Australian C-Tick (N176) If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR22 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian C...

Page 23 - Corrosive environment

Video 3.5 HDD Product Manual, Rev. H 23 www.seagate.com Drive Specifications "O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower than the threshold defined by the China RoHS MCV Standard. "X" indicates the hazardous and toxi...

Page 25 - Configuring and Mounting the Drive; Handling and static-discharge precautions; • Handle the drive by its edges or frame; Configuring the drive; Table 6

Video 3.5 HDD Product Manual, Rev. H 25 3.0 Configuring and Mounting the Drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to potenti...

Page 26 - Configuring and Mounting the Drive; Drive mounting

26 Video 3.5 HDD Product Manual, Rev. H Configuring and Mounting the Drive www.seagate.com Figure 3 Attaching SATA cabling Each cable is keyed to ensure correct orientation. Video 3.5 HDD drives support latching SATA connectors. 3.4 Drive mounting You can mount the drive in any orientation using fou...

Page 29 - Serial ATA Interface; Hot-Plug compatibility; Segment; Signal

Video 3.5 HDD Product Manual, Rev. H 29 4.0 Serial ATA Interface These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0 to 4; multiword DMA modes 0 to 2, and Ultra DMA modes 0 to 6. For detailed infor...

Page 30 - Serial ATA Interface; Supported ATA commands; Power; Command name

30 Video 3.5 HDD Product Manual, Rev. H Serial ATA Interface www.seagate.com Notes: 1. All pins are in a single row, with a 1.27mm (0.050”) pitch. 2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are: • the ground pins...

Page 33 - Word

Video 3.5 HDD Product Manual, Rev. H 33 www.seagate.com Serial ATA Interface 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 4096-byte block of data, whose contents ...

Page 35 - xx

Video 3.5 HDD Product Manual, Rev. H 35 www.seagate.com Serial ATA Interface 81 Minor version number 0028 H 82 Command sets supported 346B H 83 Command sets supported 7D69 H 84 Command sets support extension (see note following this table) 4133 H See Word 108-111 note. (4133 H = 1000000100101 binary...

Page 36 - Bit

36 Video 3.5 HDD Product Manual, Rev. H Serial ATA Interface www.seagate.com Note Automatic Acoustic Management (AAM) features are not supported. Note See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. Table 9 Bit Descriptions Description (if bit is set to 1) Bit Wor...

Page 38 - Draft; Code in features register

38 Video 3.5 HDD Product Manual, Rev. H Serial ATA Interface www.seagate.com 4.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time. If sel...

Page 39 - Index

Video 3.5 HDD Product Manual, Rev. H 39 Index A ACA 22 Acceleration 19 Acoustics 20 Active 17 Active mode 17 Agency certification 21 Altitude 18 Ambient temperature 14 , 18 Areal density 9 , 13 ATA commands 30 Australia/New Zealand Standard AS/NZ CISPR22 22 Australian Communication Authority (ACA) 2...

Page 44 - Seagate Technology LLC

Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888EUROPE, MIDDLE EAST AND AFRICA Sea...