SEAGATE ST3600057FC - Manuals

Cheetah 15K.7 FC Product Manual, Rev. A iii 10.5 FC-AL physical interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6310.5.1 Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 10....

Cheetah 15K.7 FC Product Manual, Rev. A 1 1.0 Scope This manual describes Seagate Technology ® LLC, Cheetah ® 15K.7 FC (Fibre Channel) disc drives. Cheetah 15K.7 FC drives support the Fibre Channel Arbitrated Loop and SCSI Fibre Channel Protocol specifi-cations to the extent described in this manual...

2 Cheetah 15K.7 FC Product Manual, Rev. A 2.0 Applicable standards and reference documentation The drive has been developed as a system peripheral to the highest standards of design and construction. The drive depends upon its host equipment to provide adequate power and environment in order to achi...

Cheetah 15K.7 FC Product Manual, Rev. A 3 2.1.2 Electromagnetic compliance Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys-tem repr...

4 Cheetah 15K.7 FC Product Manual, Rev. A 2.3 Reference documents ANSI Fibre Channel Documents X3.230-1994 FC Physical and Signaling Interface (FC-PH) X3.297.1997 FC-PH-2 Fibre Channel Physical and Signaling Interface-2 X3.303.1998 FC-PH-3 Fibre Channel Physical and Signaling Interface-3 X3.272-1996...

Cheetah 15K.7 FC Product Manual, Rev. A 5 3.0 General description Cheetah 15K.7 FC drives provide high performance, high capacity data storage for a variety of systems includ-ing engineering workstations, network servers, mainframes, and supercomputers. Cheetah 15K.7 FC drives support 4-Gbit Fibre C...

6 Cheetah 15K.7 FC Product Manual, Rev. A 3.1 Standard features Cheetah 15K.7 FC drives have the following standard features:• 4-Gbit Fibre Channel interface• Integrated dual port FC-AL controller• Concurrent dual port transfers• Support for FC arbitrated loop, private and public attachment• Differe...

Cheetah 15K.7 FC Product Manual, Rev. A 7 • Authenticated firmware download 3.2 Media description The media used on the drive has an aluminum substrate coated with a thin film magnetic material, overcoated with a proprietary protective layer for improved durability and environmental protection. 3.3 ...

8 Cheetah 15K.7 FC Product Manual, Rev. A the extra capacity potential is useful, or whether their assurance of backward and forward compatibility takes precedence. 3.5.1 Programmable drive capacity Using the Mode Select command, the drive can change its capacity to something less than maximum. See ...

Cheetah 15K.7 FC Product Manual, Rev. A 9 4.0 Performance characteristics This section provides detailed information concerning performance-related characteristics and features of Cheetah 15K.7 FC drives. 4.1 Internal drive characteristics ST3600057FC ST3450857FC ST3300657FC ST3600957FC ST3450757FC ...

10 Cheetah 15K.7 FC Product Manual, Rev. A Note. There is no significant difference in the format time between SED and non-SED models of the same capacity. 4.2.3 General performance characteristics Sustainable disc transfer rate*: Minimum 122 Mbytes/sec (typical) Maximum 204 Mbytes/sec (typical) Fib...

Cheetah 15K.7 FC Product Manual, Rev. A 11 4.5 Cache operation Note. Refer to the Fibre Channel Interface Manual for more detail concerning the cache bits. Of the 16 Mbytes physical buffer space in the drive, approximately 13,000 kbytes can be used as a cache. The buffer is divided into logical segm...

12 Cheetah 15K.7 FC Product Manual, Rev. A The Synchronize Cache command may be used to force the drive to write all cached write data to the medium. Upon completion of a Synchronize Cache command, all data received from previous write commands will have been written to the medium. Table 18 shows th...

Cheetah 15K.7 FC Product Manual, Rev. A 13 5.0 Reliability specifications The following reliability specifications assume correct host and drive operational interface, including all inter-face timings, power supply voltages, environmental requirements and drive mounting constraints. 5.1 Error rates ...

14 Cheetah 15K.7 FC Product Manual, Rev. A 5.1.3 Seek errors A seek error is defined as a failure of the drive to position the heads to the addressed track. After detecting an initial seek error, the drive automatically performs an error recovery process. If the error recovery process fails, a seek ...

Cheetah 15K.7 FC Product Manual, Rev. A 15 present, loop operation may continue. If the bypass circuit is not present, loop operation will be halted while the self test of the FC interface runs. When the self test completes successfully, the control line to the bypass circuit is disabled and the dri...

16 Cheetah 15K.7 FC Product Manual, Rev. A Determining rate S.M.A.R.T. monitors the rate at which errors occur and signals a predictive failure if the rate of degraded errors increases to an unacceptable level. To determine rate, error events are logged and compared to the number of total operations...

Cheetah 15K.7 FC Product Manual, Rev. A 17 5.2.6 Drive Self Test (DST) Drive Self Test (DST) is a technology designed to recognize drive fault conditions that qualify the drive as a failed unit. DST validates the functionality of the drive at a system level. There are two test coverage options imple...

18 Cheetah 15K.7 FC Product Manual, Rev. A 5.2.6.2.3 Short and extended tests DST has two testing options:1. short2. extended These testing options are described in the following two subsections. Each test consists of three segments: an electrical test segment, a servo test segment, and a read/verif...

20 Cheetah 15K.7 FC Product Manual, Rev. A 6.0 Physical/electrical specifications This section provides information relating to the physical and electrical characteristics of the drive. 6.1 AC power requirements None. 6.2 DC power requirements The voltage and current requirements for a single drive ...

22 Cheetah 15K.7 FC Product Manual, Rev. A [1] Measured with average reading DC ammeter. Instantaneous +12V current peaks will exceed these val- ues. Power supply at nominal voltage. N (number of drives tested) = 6, 35 Degrees C ambient. [2] For +12 V, a –10% tolerance is allowed during initial spin...

Cheetah 15K.7 FC Product Manual, Rev. A 23 6.2.1 Conducted noise immunity Noise is specified as a periodic and random distribution of frequencies covering a band from DC to 10 MHz. Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power connector. 6.2.2 Po...

26 Cheetah 15K.7 FC Product Manual, Rev. A 6.3 Power dissipation 600GB model Typical power dissipation under idle conditions in 4 Gbit operation is 11.58 watts (39.52 BTUs per hour). To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure 4). L...

28 Cheetah 15K.7 FC Product Manual, Rev. A 300GB models Typical power dissipation under idle conditions in 4 Gbit operation is 9.06 watts (30.92 BTUs per hour). To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure 4). Locate the typical I/O ...

Cheetah 15K.7 FC Product Manual, Rev. A 29 b. Non-operating –40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 86°F (30°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. HDA Temp. Check Point .5&#...

30 Cheetah 15K.7 FC Product Manual, Rev. A 6.4.4 Shock and vibration Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonances may occur intern...

Cheetah 15K.7 FC Product Manual, Rev. A 31 Z Y X Z Y X Figure 8. Recommended mounting

32 Cheetah 15K.7 FC Product Manual, Rev. A 6.4.4.2 Vibration a. Operating—normal The drive as installed for normal operation, shall comply with the complete specified performance while subjected to continuous vibration not exceeding10 – 300 Hz 1.0 G RMS (0 to peak) 301– 500 Hz 0.5 G RMS (0 to peak) ...

34 Cheetah 15K.7 FC Product Manual, Rev. A 6.5 Mechanical specifications Refer to Figure 9 for detailed physical dimensions. See Section 9.4, “Drive mounting.”” S -Z- T // J H L B K [1] F [1] D E -Z- Mounting holes are 6-32 UNC 2B, three on each side and four on the bottom. Max screw penetration int...

Cheetah 15K.7 FC Product Manual, Rev. A 35 7.0 About self-encrypting drives Self-encrypting drives (SEDs) offer encryption and security services for the protection of stored data, com-monly known as “protection of data at rest.” These drives are compliant with the Trusted Computing Group (TCG) Enter...

36 Cheetah 15K.7 FC Product Manual, Rev. A 7.2.2 Locking SP The Locking SP controls read/write access to the media and the cryptographic erase feature. Access to the Locking SP is available using the BandMasterX or EraseMaster passwords. Since the drive owner can define up to 16 data bands on the dr...

Cheetah 15K.7 FC Product Manual, Rev. A 37 7.6 Cryptographic erase A significant feature of SEDs is the ability to perform a cryptographic erase. This involves the host telling the drive to change the data encryption key for a particular band. Once changed, the data is no longer recoverable since it...

38 Cheetah 15K.7 FC Product Manual, Rev. A 8.0 Defect and error management Seagate continues to use innovative technologies to manage defects and errors. These technologies are designed to increase data integrity, perform drive self-maintenance, and validate proper drive operation. SCSI defect and e...

42 Cheetah 15K.7 FC Product Manual, Rev. A 8.7 Idle Read After Write Idle Read After Write (IRAW) utilizes idle time to verify the integrity of recently written data. During idle periods, no active system requests, the drive reads recently written data from the media and compares it to valid write c...

Cheetah 15K.7 FC Product Manual, Rev. A 43 9.0 Installation Cheetah 15K.7 FC disc drive installation is a plug-and-play process. There are no jumpers, switches, or termi-nators on the drive. Simply plug the drive into the host’s 40-pin Fibre Channel backpanel connector (FC-SCA) — no cables are requi...

44 Cheetah 15K.7 FC Product Manual, Rev. A 9.3 Cooling The host enclosure must dissipate heat from the drive. You should confirm that the host enclosure is designed to ensure that the drive operates within the temperature measurement guidelines described in Section 6.4.1. In some cases, forced airfl...

46 Cheetah 15K.7 FC Product Manual, Rev. A 10.0 Interface requirements This section partially describes the interface requirements as implemented on Cheetah 15K.7 FC drives. Addi-tional information is provided in the Fibre Channel Interface Manual (part number 100293070). 10.1 FC-AL features This se...

48 Cheetah 15K.7 FC Product Manual, Rev. A 10.1.4 Fibre Channel port login Table 9 identifies the required content of the N_Port Login (PLOGI) payload from an initiator. Table 9: N_Port login (PLOGI) payload Bytes 0-15 03 00 00 00 09 09 BB BB CF XX FS FS XX XX XX XX Common 16-31 XX XX XX XX PN PN PN...

Cheetah 15K.7 FC Product Manual, Rev. A 49 10.1.5 Fibre Channel port login accept Table 10 identifies the N_Port Login access payload values. 10.1.6 Fibre Channel Process Login Table 11 lists the process login payload data. XX Indicates fields that are not used. Table 10: N_Port Login Accept (ACC) p...

50 Cheetah 15K.7 FC Product Manual, Rev. A 10.1.7 Fibre Channel Process Login Accept Table 12 lists Cheetah 15K.7 FC process login accept payload data. 10.1.8 Fibre Channel fabric login Table 13 lists the fabric login payload from the drive. Table 12: Process Login Accept (ACC) payload Bytes 0-15 02...

Cheetah 15K.7 FC Product Manual, Rev. A 51 10.1.9 Fibre Channel fabric accept login Table 14 lists the required content of the Fabric Login Accept (ACC) payload from the fabric. Table 14: Fabric Login Accept (ACC) payload Bytes 0-15 02 00 00 00 09 09 BB BB CF XX FS FS R_ A_ T0 V_ Common 16-31 E_ D_ ...

52 Cheetah 15K.7 FC Product Manual, Rev. A 10.1.10 Fibre Channel Arbitrated Loop options Table 15 lists the FC-AL options supported by Cheetah 15K.7 FC drives. 10.2 Dual port support Cheetah 15K.7 FC drives have two independent FC-AL ports. These ports may be connected on independent loops or on the...

Cheetah 15K.7 FC Product Manual, Rev. A 53 Table 16: Supported commands Command code Supported (Y/N) [4] Command name Executable state of standard SCSI commands in the presence of LBA banding (applies to SED models only) Affects entire Drive (Y/N) User Data Accessed (Y/N) Affected LBA Unlocked ReadL...

Cheetah 15K.7 FC Product Manual, Rev. A 57 [3] Reference Mode Sense command 1Ah for mode pages supported.[4] Y = Yes. Command is supported. N = No. Command is not supported. A = Support is available on special request. 10.3.1 Inquiry data Table 17 lists the Inquiry command data that the drive should...

62 Cheetah 15K.7 FC Product Manual, Rev. A 10.4 Miscellaneous operating features and conditions Table 21 lists various features and conditions. A “Y” in the support column indicates the feature or condition is supported. An “N” in the support column indicates the feature or condition is not supporte...

Cheetah 15K.7 FC Product Manual, Rev. A 63 10.5 FC-AL physical interface Figure 11 shows the location of the J1 Fibre Channel single connection attachment (FC-SCA). Figure 13 pro-vides the dimensions of the FC-SCA connector. Details of the physical, electrical, and logical characteristics are provid...

64 Cheetah 15K.7 FC Product Manual, Rev. A 10.5.2 Connector requirements Table 23: Recommended mating SCA part numbers Part description Positions Part number Features AMP Vertical (SCA sequence) 40 787317-1 With polarization Berg 40 71781 With polarization Methode 40 512-220-91-101N With polarizatio...

Cheetah 15K.7 FC Product Manual, Rev. A 65 Table 24: FC-SCA pin descriptions Pin Signal name Signal type Pin Signal name Signal type 1* -EN bypass port A Low Voltage TTL output 21 12 Volts charge 2* 12 Volts 22 Ground 3* 12 Volts 23 Ground 4* 12 Volts 24* +Port A_in FC Diff. input pair 5* -Parallel ...

68 Cheetah 15K.7 FC Product Manual, Rev. A 10.5.11 SEL_6 through SEL_0 ID lines The SEL_6 through SEL_0 ID lines determine drive address, and, optionally, for an Enclosure Services Inter-face. When the Parallel ESI line is high, the enclosure backpanel must provide address information on the SEL lin...

70 Cheetah 15K.7 FC Product Manual, Rev. A 10.5.12 Device control codes The drive inputs a Device Control Code on the DEV_CTRL_CODE lines at power up to determine the link rate on the Fibre Channel ports. Both ports run at the same rate. If the backpanel does not connect to these lines, the drive ha...

Cheetah 15K.7 FC Product Manual, Rev. A 71 10.6.2 LED driver signals Fault and Active LED signals are located in the FC-SCA connector (J1). See Table 30 for the output character-istics of the LED drive signals. 10.6.3 FC Differential output The serial output signal voltage characteristics are provid...

72 Cheetah 15K.7 FC Product Manual, Rev. A Figure 16 provides the data valid eye diagram for typical and minimum requirements to recover data at the specified interface error rate. The inputs are AC coupled on the drive. Figure 16. Receive eye diagram Table 33: Eye diagram data values Link rate 1 GH...

Cheetah 15K.7 FC Product Manual, Rev. A 73 11.0 Seagate Technology support services Internet For information regarding Seagate products and services, visit www.seagate.com . Worldwide support is available 24 hours daily by email for your questions. Presales Support: [email protected] Technical Su...

74 Cheetah 15K.7 FC Product Manual, Rev. A Customer Service Operations Warranty Service Seagate offers worldwide customer support for Seagate products. Seagate distributors, OEMs and other direct customers should contact their Seagate Customer Service Operations (CSO) representative for warranty-rel...

Cheetah 15K.7 FC Product Manual, Rev. A 75 Index Numerics 12 volt pins 66 3rd party reserve command 56 5 volt pins 66 A Abort Sequence (ABTS) 46 abort task set function 47 AC coupling 65 AC power requirements 20 ACA active status 62 ACA active, faulted initiator status 62 Accept (ACC) 46 acoustics 3...

80 Cheetah 15K.7 FC Product Manual, Rev. A security partitions 35 Security Protocol In 35 Security Protocol Out 35 Seek command 53 seek error defined 14 rate 13 Seek extended command 54 seek performance characteristics 9 seek time average typical 9 full stroke typical 9 single track typical 9 segmen...