SEAGATE S ST91603010AS - Manuals

Momentus Thin Series SATA Product Manual, Rev. B 1 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Momentus ® Thin Series SATA model drives: • ST92503010AS • ST91603010AS These drives provide the following key features: • 5400-...

2 Momentus Thin Series SATA Product Manual, Rev. B 1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is ...

Momentus Thin Series SATA Product Manual, Rev. B 3 2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the ST92503010AS...

Momentus Thin Series SATA Product Manual, Rev. B 5 2.2 Formatted capacity Model Formatted capacity* Guaranteed sectors Bytes per sector ST92503010AS 250 GB 488,397,168 512 ST91603010AS 160 GB 312,581,808 *One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may ...

6 Momentus Thin Series SATA Product Manual, Rev. B 2.6 Physical characteristics Drive specification Height (mm) (in) 6.8 +/-0.2 0.268 +/-0.0079 Width (mm) (in) 69.85 +/-0.25 2.75 +/-0.0098 Length (mm) (in) 100.35 +0.20/-0.25 3.951 +0.008/-0.010 Weight (max) ST92503010AS and ST91603010AS 92.0 g 0.203...

Momentus Thin Series SATA Product Manual, Rev. B 7 2.9 Power specifications The drive receives DC power (+5V) through a native SATA power connector. 2.9.1 Power consumption Power requirements for the drives are listed in the table on page 7. Typical power measurements are based on an average of driv...

8 Momentus Thin Series SATA Product Manual, Rev. B 2.9.1.1 Typical current profile Figure 1. Typical +5V only startup and operation current profile 2.9.2 Deferred spinup Momentus Thin Series SATA drives do not support the deferred spinup option. If you require this option, refer to the Momentus 5400...

10 Momentus Thin Series SATA Product Manual, Rev. B 2.10 Environmental specifications 2.10.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Above 1000 feet (305 meters), the maximum temperature is derated linearly by 1°C ev...

12 Momentus Thin Series SATA Product Manual, Rev. B 2.11 Acoustics Drive emission of sound is measured consistent with the ECMA-74 and its’ referenced standards. Testing is conducted at room temperature (approximately 25 ° C). Emission levels are reported as the total A-weighted sound power levels f...

Momentus Thin Series SATA Product Manual, Rev. B 13 2.13 Reliability Measurement type Specification Nonrecoverable read errors 1 per 10 14 bits read, max. Annualized Failure Rate (AFR) <0.48% Load/Unload (U/UL) 25°C, 50% relative humidity 32°C, 80% relative humidity 5°C, 80% relative humidity 5°C...

14 Momentus Thin Series SATA Product Manual, Rev. B Australian C-Tick (N176) If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR22 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (A...

Momentus Thin Series SATA Product Manual, Rev. B 15 2.15 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. 2.15.1 European Union Restriction of Hazardous Substances (RoHS) The ...

16 Momentus Thin Series SATA Product Manual, Rev. B 3.0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be expose...

Momentus Thin Series SATA Product Manual, Rev. B 17 3.2 Configuring the drive Each drive on the Serial ATA interface connects in a point-to-point configuration with the Serial ATA host adapter. There is no master/slave relationship because each drive is considered a master in a point-to-point relati...

18 Momentus Thin Series SATA Product Manual, Rev. B 3.4 Drive mounting You can mount the drive using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 4 for drive mounting dimensions. Follow these important mounting precautions when mount-ing the drive: •...

Momentus Thin Series SATA Product Manual, Rev. B 19 4.0 Serial ATA (SATA) interface These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. The drive also ...

Momentus Thin Series SATA Product Manual, Rev. B 21 4.3 Supported ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification . See “S.M.A.R.T. ...

24 Momentus Thin Series SATA Product Manual, Rev. B 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in the table on ...

26 Momentus Thin Series SATA Product Manual, Rev. B 95–99 ATA-reserved 0000 H 100–103 Total number of user-addressable LBA sectors available(see Section 2.2 for related information)These words are required for drives that support the 48-bit addressing feature. Maximum value: 0000FFFFFFFFFFFFh. ST925...

28 Momentus Thin Series SATA Product Manual, Rev. B 4.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an inter-rupt...

30 Momentus Thin Series SATA Product Manual, Rev. B 5.0 Seagate Technology support services Internet For information regarding Seagate products and services, visit www.seagate.com . Worldwide support is available 24 hours daily by email for your questions. Presales Support: [email protected] Tech...

Momentus Thin Series SATA Product Manual, Rev. B 31 Customer Service Operations Presales Support Our Presales Support staff can help you determine which Seagate products are best suited for your specific application or computer system, as well as product availability and compatibility. Technical Sup...

Momentus Thin Series SATA Product Manual, Rev. B 33 Index A ACA 14 acoustics 4 , 12 Active mode 9 Address 21 AFR 13 Agency certification 13 Altitude 10 Altitude, nonoperating 4 Altitude, operating 4 Ambient temperature 4 , 10 ambient temperature 6 Annualized Failure Rate 13 Annualized Failure Rate (...