SEAGATE DM000 - Manuals

Seagate Desktop HDD Product Manual, Rev. A 4 For information regarding online support and services, visit: http://www.seagate.com/contacts/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Service Centers For...

Seagate Desktop HDD Product Manual, Rev. A 5 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following: Seagate ® Desktop HDD model drives: These drives provide the following key features: • High instantaneous (burst) data-transfer rates (up to ...

Seagate Desktop HDD Product Manual, Rev. A 6 www.seagate.com Drive Specifications 2.0 Drive Specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manu...

Seagate Desktop HDD Product Manual, Rev. A 8 www.seagate.com Drive Specifications 2.2 Formatted capacityy *One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LB...

Seagate Desktop HDD Product Manual, Rev. A 9 www.seagate.com Drive Specifications 2.5 Physical characteristics 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined a...

Seagate Desktop HDD Product Manual, Rev. A 10 www.seagate.com Drive Specifications 2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. Refer to Figure 1 on page 17 . 2.8.1 Power consumption Power requirements for the drives are listed in Table 2 ...

Seagate Desktop HDD Product Manual, Rev. A 11 www.seagate.com Drive Specifications 2.8.3 Voltage tolerance Voltage tolerance (including noise):• 5V ±5% • 12V ±10% 2.8.4 Power-management modes The drive provides programmable power management to provide greater energy efficiency. In most systems, user...

Seagate Desktop HDD Product Manual, Rev. A 12 www.seagate.com Drive Specifications 2.9 Environmental specifications This section provides the temperature, humidity, shock, and vibration specifications for Desktop HDDs. Ambient temperature is defined as the temperature of the environment immediately ...

Seagate Desktop HDD Product Manual, Rev. A 13 www.seagate.com Drive Specifications 2.9.5 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.9.5.1 Operating shock These drive...

Seagate Desktop HDD Product Manual, Rev. A 14 www.seagate.com Drive Specifications 2.10 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essential...

Seagate Desktop HDD Product Manual, Rev. A 15 www.seagate.com Drive Specifications 2.12 Warranty To determine the warranty for a specific drive, use a web browser to access the following web page: http://www.seagate.com/support/warranty-and-replacements/ From this page, click on “Check to see if the...

Seagate Desktop HDD Product Manual, Rev. A 16 www.seagate.com Drive Specifications 2.14 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. 2.14.1 European Union Restriction of H...

Seagate Desktop HDD Product Manual, Rev. A 17 3.0 Configuring and Mounting the Drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to p...

Seagate Desktop HDD Product Manual, Rev. A 18 www.seagate.com Configuring and Mounting the Drive 3.4 Drive mounting Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. Refer to Figure 2 for drive mounting dimensions. ...

Seagate Desktop HDD Product Manual, Rev. A 20 www.seagate.com SATA Interface 4.0 SATA Interface These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0 to 4; multiword DMA modes 0 to 2, and Ultra DMA m...

Seagate Desktop HDD Product Manual, Rev. A 21 www.seagate.com SATA Interface 4.3 Supported ATA commands The following table lists SATA standard commands that the drive supports.For a detailed description of the ATA commands, refer to the Serial ATA International Organization:Serial ATA Revision 3.2 ...

Seagate Desktop HDD Product Manual, Rev. A 23 www.seagate.com SATA Interface 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents a...

Seagate Desktop HDD Product Manual, Rev. A 26 www.seagate.com SATA Interface 4.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY an...

Seagate Desktop HDD Product Manual, Rev. A 27 www.seagate.com SATA Interface 4.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time. If sel...

Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA S...